Marine Navigation & Instruments

Furuno CM599LHG 2-3kW Urethane Pocket Mount CHIRP Transducer [CM599LHG]

Ships Direct From Manufacturer

CM599LHG 2-3kW Urethane Pocket Mount CHIRP Transducer

Urethane, 2-3kW Tank/Cavity/Pocket Mount CHIRP Transducer, 28-60kHz and 130-210kHz.

Specifications:

• Frequency: CHIRP 28-60kHz and 130-210kHz
• Power Rating: 3kW
• Housing Type: Urethane

Broadband CM599LHG operates at any frequency between 28 kHz to 60 kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the CM599LHG’s beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish.

Because the CM599LHG has a bandwidth that covers a continuous frequency spectrum, next generation fishfinders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions.

Features:

• 3kW High Frequency, 2kW Low Frequency
• Depth and Fast-Response Water Temperature Sensor
• Furuno Free Synthesizer (FFS) compatible
• Low – CHIRPs from 28kHz to 60kHz, 23° to 9° port-starboard beamwidth, 11° to 5° fore-aft beamwidth
• High – CHIRPs from 130kHz to 210kHz, 8° to 4° beamwidth
• Covers popular fishing frequencies of 28, 38, 50, and 200kHz plus everything else in the bandwidth
• Epoxy transducer housing
• No Connector, no Diplexer

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Veratron AcquaLink Analog Wind Short Arm Sensor - Black [A2C59501983]

AcquaLink® Analog Wind Short Arm Sensor - Black

The legacy wind vane turns in the direction of the wind and steers the wind direction gauge. The wind cups record the relative wind speed which in turn is displayed on the wind speed gauge. Also compatible with VDO Marine ‘Standard’ & ‘Logic’ series.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Instrument Function: Wind
• Box Dimensions: 7"H x 16"W x 31"L WT: 3.05 lbs
• UPC: 7640178725263

Airmar B175 Bronze Low Frequency 1kW Chirp Transducer 0 Tilt - Requires Mix  Match Cable [B175C-0-L-MM]

Ships Direct From Manufacturer

B175 Bronze Low Frequency 1kW Chirp Transducer 0° Tilt - Requires Mix & Match Cable

Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The B175L transducer delivers up to 20 kHz of total bandwidth in just one installation and delivers tremendous deep water performance.

The B175L transmits across the following bandwidth:

Low Frequency 40 to 60 kHz

Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.

Features:

• Depth and fast-response water-temperature sensor
• 1 kW
• Low Frequency: 40 kHz to 60 kHz with maximum depth performance to 762 m (2500') 32° to 21° beamwidth
• Great deep water performance
• High performance, low-profile thru-hull housing provides good resolution at speed when installed properly
• Bronze housing for use on stepped, planing or displacement hulls in fiberglass or wood
• Recommended boat size: Up to 11 m (36')
• Exclusive Xducer ID® technology

Specifications:

• Weight: 2.7 kg (6 lb)
• Hull Deadrise: 0-7 degrees
• Acoustic Window: Urethane
• Hole Size: 98 mm (3-7/8")
• Seven internal broadband ceramic assemblies

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar SS175L Low 20 Tilted Element Thru Hull Transducer 1kw [SS175C-20-L-MM]

Ships Direct From Manufacturer

SS175L Stainless Steel 20° Thru Hull Mix & Match

Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

• Designed for smaller boats up to 36 feet (11M)
• A tilted element model in the Chirp Thru-Hull product line, the SS175L Chirps across the following bandwidth: L Model - Low Frequency 40-60 kHz
• Depth & fast-response water-temperature sensor
• Low—CHIRPS from 40 kHz to 60 kHz, 32° to 21° beamwidth
• 20° tilted
• 35 kHz of total bandwidth from one transducer
• Covers popular fishing frequency of 50 kHz plus everything else in the bandwidth
• Steel transducer housing
• Hull Type: Steel or aluminum
• Exclusive Xducer ID® technology
• Hull Deadrise: 16 to 24 degrees
• Acoustic Window: Urethane

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Chirp: Low
• Box Dimensions: 8"H x 10"W x 12"L WT: 11.2 lbs
• UPC: 801769002140

Airmar UST850 Smart Sensor NMEA 2000 - Plastic Housing [UST850S-P17-N2]

UST850 Smart Sensor NMEA 2000 - Plastic Housing

AIRMAR's UST850 just turned your maintenance time into more cruising time…and made your boat smarter too. Ultrasonic speed and temperature in one single housing with no moving parts makes this sensor a high precision, low maintenance solution for use on power and sail boats of all types and sizes. Say goodbye to paddlewheel maintenance and hello to Smart technology, from the company who invented the Smart Sensor. 

Features:

• Easily retrofitted into Airmar’s ST650/ST850 Series without haul out!
• Ultrasonic Speed & Temperature in one housing with no moving parts
• Precise readings at high speeds ideal for powerboats and performance sailing
• Fast data update rate (up to 10 x per second)
• Speed Range (0.1 to 50 knots)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Owner's Manual (pdf)

Airmar SS175L Stainless Steel 12 Thru Hull Mix  Match [SS175C-12-L-MM]

Ships Direct From Manufacturer

SS175L Stainless Steel 12° Thru Hull Mix & Match

Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

• Designed for smaller boats up to 36 feet (11M)
• A tilted element model in the Chirp Thru-Hull product line, the SS175L Chirps across the following bandwidth: L Model - Low Frequency 40-60 kHz
• Depth & fast-response water-temperature sensor
• Low—CHIRPS from 40 kHz to 60 kHz, 32° to 21° beamwidth
• 12° tilted 
• 35 kHz of total bandwidth from one transducer
• Covers popular fishing frequency of 50 kHz plus everything else in the bandwidth
• Steel transducer housing
• Hull Type: Steel or aluminum
• Exclusive Xducer ID® technology
• Hull Deadrise: 8 to 15 degree
• Acoustic Window: Urethane

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Chirp: Low
• Box Dimensions: 8"H x 11"W x 12"L WT: 11.15 lbs

Maretron Vessel Data Recorder Includes M003029 VDR100 [VDR100-01]

Vessel Data Recorder Includes M003029 VDR100

Maretron's Vessel Data Recorder (VDR100) is used to record messages transmitted from every product interconnected on the vessel's NMEA 2000® network. Each message is stored using solid-state memory technology with simple data retrieval via a removable USB flash drive. The supplied 16 Gbyte USB Flash Drive will hold weeks or more of data, and with the optional purchase of a larger USB Flash Drive, a year or more of data can be stored. And you never have to worry about losing the most recent data because the VDR100 uses a circular buffer where the oldest data is overwritten only after the entire memory is filled.

Recorded vessel data can be used in many ways including performance analysis, vessel tracking, preventative maintenance, network diagnostics, warranty incident, and accident investigation, all in an effort to reduce operating cost and improve safety. As an example of how the recorded data might be used, consider an NMEA 2000® fuel flow monitor plugged into the network, which will provide a complete record of how much fuel was used and how fast it was used. With a GPS antenna/receiver plugged into the NMEA 2000® network, you will have a complete record of where the vessel has been including its speed and course over ground.

Analyzing and graphing recorded data is done using a spreadsheet program like Microsoft® Excel®. Simply remove the USB Flash Drive and plug it into a PC or Mac and run Maretron's free extraction software (N2KExtractor®). Choose any or all of the recorded data including the associated dates and times and the program will create a comma delimited file (.csv) that can be read into a spreadsheet for graphing or any other type of data analysis.

With the VDR100, you have a complete record of all the information produced by NMEA 2000® products connected to the vessel's network. And because the VDR100 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radio Communication Equipment), your data is safely protected in a compact waterproof housing.

USB Flash Drives

Depending on how much data you wish to record without overwriting older data, the following table can be used to determine the capacity of the USB Flash Drive you need. These figures are estimated assuming a 25% loaded system (approx 463 frames/second).

Features:

• Data recorded on solid state memory via removable USB flash drive
• Circular buffer preserves latest recorded data while oldest data overwritten when memory is full
• Recorded data available for performance analysis, vessel tracking, preventive maintenance, and more
• Optional waterproof USB flash drive cover
• Free data extraction software (N2KExtractor®) builds comma delimited files for data analysis

Garmin Steering Actuator [010-12826-00]

Steering Actuator

This mechanical linear actuator mounts through the tilt tube of your kicker motor and is driven by the autopilot system to provide precise steering control. 

Features:

• Dimensions: Motor side: Extends 4” (10.3 cm) from end of tilt tube. Motor: 2.5” (6.2 cm) diameter. Overall length: Closed 17.5” (44.5 cm); Extended 25.3” (64.4 cm).
• Operating temperature range: -20° to 70° C
• Water rating: IPX7

Compatible Devices:

• Reactor 40 Kicker Autopilot

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 5"H x 8"W x 21"L WT: 5.2 lbs
• UPC: 753759221737