Boat Outfitting

Lenco 12" x 12" Edge Mount Trim Tab Kit w/o Switch Kit 12V [15016-101]

12" x 12" Edge Mount Trim Tab Kit without Switch Kit -12V 

Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
• 2 each of #30133-103 20' actuator extension wiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owner’s / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 17' to 30'
• Length of Tab: 12"
• Width of Tab: 12"
• Hinge Height: 2"
• Minimum Transom Height: 11"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Brochure (pdf)

PROTECH 2.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/2 Cylinder - No Hoses

Durability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. 

Kit Contains:

• UP28 F Front mount helm pump
• UC128-TS/2 Cylinder Front mount outboard cylinder
• OIL 15 Hydraulic oil - 2 quarts
• The wheel is not included

Uflex SilverSteer UC128TS High Performance Cylinder V2P w/Offset Link Arm - Port Version [UC128TS-SVS 2P]

SilverSteer UC128TS High Performance Cylinder V2P with Offset Link Arm - Port Version

Specially designed for high-performance, high-torque applications, the SilverSteer™ UC128TS cylinder is recommended for bass boats, flats boats, and tournament fishing boats. 

Compatible with competing helms, hoses, and oil, the UC128TS is built to last with a heavy-duty stainless steel cylinder rod, seals, and link assemblies. Simple to install and fits almost every 2- and 4-stroke outboard engine on the market.

Features:

• Type 2 offset link arm
• Link arm attached to the port side of the cylinder

Please note that P/N: UC128TS-SVS 2P is a direct replacement of P/N: UC128-SVS 2P. P/N: UC128TS-SVS 2P has the same cylinder, but it's easier to service.

Bennett AutoTrim Pro f/Hydraulic Trim Tabs [AP000A1HA]

AutoTrim Pro for Hydraulic Trim Tabs

An all-in-one trim tab control system combining a myriad of essential features… Automatic Trim Tab Control, Manual Trim Tab Control, and Trim Tab Position Indication… all combined into an easy-use, space-saving keypad. It’s like cruise control for your tabs

AutoTrim Pro automatically levels the pitch and roll of your boat, adjusting your trim tabs to changes in vessel speed, sea conditions and shifting weight. …And you can take full manual control anytime with the touch of a button. It’s like cruise control for your boat.

This affordable solution can be added to most existing trim tab systems – electric or hydraulic. It’s fully compatible with all Bennett systems, and most others. Installation is simple and straight forward.

Features & Benefits

Auto Trim Tab Control: Easily store 2 favorite automatic running attitudes in memory. See real-time AutoTrim Pro adjustments with LED indication

Manual Tab Control with Automatic Override: Just push anywhere on the bow up or down buttons and you’re in full manual command of the trim tabs

OEM Customizable Response Time: Configure response time to engine power, hull type, actuator type or trim tab size

Trim Tab Position Indication: L.E.D. indicators equipped with adjustable light intensity

One-touch Manual Full Up and Full Down Buttons: Down for hole-shot, up for running in a following sea, or coming into the beach

Automatic Tab Retraction: Retract trim tabs to full up position when the boat’s ignition is switched off, protecting tabs during storage and trailering

Includes:

• ATP Display
• 25' Helm Keypad Wire Extension
• ATP Hydraulic Control Box
• Pump Extension Cable
• Port Sensor Extension Cable
• Stbd Sensor Extension Cable
• AutoTrim Pro Installation & Users Guide - Hydraulic
• AutoTrim Pro Quick Start Card - Hydraulic

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Reversing Pump 1200CC/min - 12V - Up to 22ci Cylinder

Adjustable displacement Reversing Pump with Bypass Valve & Reservoir 

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 6"H x 7"W x 15"L WT: 10.4 lbs
• UPC: 628309134761

140TT 2.2kw Gen. 2 Bow Thruster - 12V

Maneuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple.

The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability.

All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time.

Features:

• No reservoir to install, no leaks, and no maintenance
• High performance 5 blade propellers give equal thrust in both directions
• High integrity seal
• Spline driven propeller, no drive pin or anode required
• Blue box electronics prevent misuse and protect motor
• Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission
• Self-resetting thermal protection 
• Easy plug together switch connections
• Minimum silhouette hub for smooth water flow

Technical Specifications:

• Voltage - 12V
• Power - 2.2 KW
• Power - 3 HP
• Tunnel Size - 5.5"
• Thrust - 92lb
• Weight - 29lb

*Sold as an Individual

Random Orbital Polisher Bigfoot LHR15 Mark V Complete Kit

The RUPES BigFoot LHR15 Mark V polisher represents a real breakthrough in the professional polishing industry. This polisher features a 125 mm backing pad and a 15 mm orbit and stands out for a series of technical innovations aimed at improving performance and comfort, offering more precise and efficient polishing.

Reduced vibration & silence with POLYSYNTHEC™ gears

A key innovation of the Mark V is the use of POLYSYNTHEC™ composite gears, which offer superior resistance to wear even in the most demanding working conditions. These gears are lighter than traditional metal gears and require less lubrication, thus improving the efficiency of the motor and reducing energy loss. The result is a drastic reduction in vibration and noise, improving comfort during prolonged use. The reduction in vibration is particularly important because it allows the operator to maintain a more stable grip, improving the precision of movements and the quality of the polishing. This also reduces fatigue during long work sessions, ensuring consistent and professional results. The 47% reduction in noise compared to previous models, however, makes the work environment quieter and more pleasant, protecting the operator’s hearing.

PrecisionPro backing pads & low center of gravity for optimal control

The BigFoot Mark V polishers bring aboard PrecisionPro backing pads, designed to ensure optimal balance when using different pads. These pads feature a protective rubber edge, which ensures greater safety when polishing delicate surfaces, reducing the risk of accidental damage. This allows the operator to work with greater confidence, even on sensitive surfaces such as edges or particularly delicate bodywork parts. Another notable innovation is the low centre of gravity of the Mark V polishers. Lowered by 13 mm compared to previous models, this allows unparalleled stability and superior control of the tool, especially in complex work situations. With a lower center of gravity, the operator can maneuver the polisher with greater precision, even when working on complex surfaces or intricate details.

5-Year Warranty

RUPES doesn’t just offer advanced technological innovations, they demonstrate their confidence in the quality and durability of the Mark V polishers with an extended 5-year warranty. By registering their product immediately after purchase, customers can enjoy comprehensive support that covers any manufacturing defects, providing long-term protection for their investment. This extended warranty not only provides added peace of mind, it also underscores RUPES’ commitment to providing high-quality products that are designed to last.

Specifications:

• Type: Tools & Accessories
• Box Dimensions: 11"H x 12"W x 22"L WT: 18 lbs
• UPC: 850056581585

GS-2-50 Grounding Strap - 2" x 50'

This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.

Features:

• Flexible (easily conforms to vessel contours)
• .01 in. (25mm) thick

Specifications:

• Width (in./cm): 2/5.1
• Length (ft./m): 50/17
• Weight (lbs/kg): 5/2.3