Boat Outfitting

12" x 12" Edge Mount Trim Tab Kit w/LED Indicator Switch Kit  - 12V 

Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.

Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.

Kit includes: 

• Self-contained sealed keypad
• Control box
• 36" Pigtail

Specifications:

• Suggested Boat Length: 17' to 30'
• Length of Tab: 12"
• Width of Tab: 12"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: LED Indicator
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Director's Chair with Cream Cushion - Teak

Features:

• Teak Director's Chair with Cushion Seat Covers
• Chair with Cream Seat Cushion
• Stainless steel hardware
• 18" high from floor to seat
• Folds for easy storage
• Oiled math
• Size: 23"W x 33-1/2"H x 17-1/2"D
• Folded: 16"W x 26-3/4"H x 9-1/2"D

Bow Thruster - 55 kgf - 12V

The Vetus 55 kgf is arguably the most popular bow thruster for yachts and powerboats from 28 to 41 feet in length. Manufactured using the highest quality materials to give high power and long service life.

The Vetus 55 kgf unit is one of the few thrusters for this class of vessel with a 150mm diameter tunnel - making it much easier to fit than competitors with standard 185mm units.

Features:

• A single propeller creates less flow disturbance in the tunnel
  
• Unique propeller blade design minimizes cavitation noise
  
• Spiral gears minimize transmission noise
  
• Flexible coupling between tail piece and motor eliminates vibration
  
• Streamlined tail piece for optimal flow
  
• Strong synthetic propeller eliminates corrosion and reduces weight
  
• Easy to install, supplied with clear installation and operation instructions
  
• All Vetus maneuvering systems meet the EMC requirements

Bennett 912ED Electric - Edge Mount Limited Space Trim Tab Kits - 12V [BOLT912ED]

912ED Electric - Edge Mount Limited Space Trim Tab Kits - 12V

9" x 12" 

Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.

Kits Include:

• (2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000)
• (2) Stainless steel trim planes (tabs) and mounting plates
• (2) 20' wire harnesses with waterproof connectors (BAW2020)

Features Include:

• Requires less than 6.5" of vertical transom space to install
• Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence
• Controls sold separately 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Actuator Type: Electro-Mechanical
• Box Dimensions: 7"H x 14"W x 15"L WT: 19.8 lbs
• UPC: 666285600306

StarPod Mini System with StarTower for Starlink Mini Dish (11.75 x 10.2″ Dish Size) *Starlink Dish Not Included

StarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates an internal swivel tube, which allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The 10-degree housing angle facilitates rainwater runoff to prevent signal degradation that can occur when water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm-thick aluminum and powder-coated with a high-gloss white finish. The bottom base of the StarTower measures 7″ square.

Be sure to choose the right StarPod System to match your Starlink dish model:

• For the Starlink Mini Dish (11.75 x 10.2″ dish size):
• SP100 Housing Only for DIY mounting (7″ diameter circular mounting surface)
• SPS1000 for mounting a Starlink Mini Dish on a Flat Surface *You’re already on this product page!*
• SPS1001 for mounting a Starlink Mini Dish on a Horizontal Rail
• SPS1002 for mounting a Starlink Mini Dish on a Vertical Rail
• SPS1003 for mounting a Starlink Mini Dish on a Thule WingBar Evo Roof Rack (COMING SOON)
• SPS2000 for Starlink Gen2 Actuated Dish (20.2 x 11.9″ dish size)
• SPS3000 for Starlink Gen3 Standard Dish (23.4 x 15.07″ dish size)

What are the benefits of mounting a Starlink dish in a StarPod?

StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of signal while inside the thermoformed acrylic-capped ABS housing.

Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.

How do I mount a Starlink dish inside a StarPod?

The kickstand base that comes with a Starlink Mini dish is not utilized when mounting inside a StarPod; only the dish itself is used. We recommend completing the initial Starlink setup process before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).

All NavPods Feature:

• Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
• Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job.
• Stainless Steel Hardware – We use all 316 stainless steel hardware that is supplied with each NavPod.
• Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod.

Panther T4 Through Tilt Tube Electro Steer - Saltwater [550103]

T4 Through Tilt Tube Electro Steer - Saltwater

A unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main engine and kicker motor. Controlled by a 24′ cable and two-button handheld remote. Wireless option available.

Lenco 12" x 12" Standard Trim Tab Kit w/Double Rocker Switch Kit [15103-104]

12" x 12" Standard Trim Tab Kit w/Double Rocker Switch Kit - 12V 

Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.

Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.

Kit includes: 

• (1) Switch Kit
• (2) 12-Gauge Stainless Steel Standard Finish Blades
• (2) 15054-001 Actuators with 6 foot Leads and Deutsch Connectors
• (2) 30133-103 Actuator Extension Wiring Harnesses- 20 foot length
• (2) 15085-001 Upper Mounting Brackets with Gland Seal
• (2) 50014-001 Lower Mounting Brackets
• Lenco Owner's/ Installation Manual
• Stainless Steel Mounting Hardware

Specifications:

• Suggested Boat Length: 17' to 30'
• Length of Tab: 12"
• Width of Tab: 12"
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Double Rocker
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Box Dimensions: 5"H x 13"W x 14"L WT: 19 lbs
• UPC: 874847000147

T5 Through Tilt Tube Electro Steer - Saltwater

T5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.

Mounting hardware included. Controlled by a 2 button handheld remote with a 24′ cable. (See optional wireless remote 55-0105).