706 products
Sort by:
706 products
Iris 3MP Compact 316L Stainless Steel Thru-Hull/Panel IP Camera - 3.6mm Lens [IRIS435-36]
Iris 3MP Compact 316L Stainless Steel Thru-Hull/Panel IP Camera - 3.6mm Lens [IRIS435-36]
3MP Compact 316L Stainless Steel Thru-Hull/Panel IP Camera - 3.6mm Lens
Looking for a discrete backup or tender watch camera, covert security camera, or through hull/through transom camera? Look no further - the IRIS-S435 (IP) / S1435 (Analogue / Analogue HD) compact bullet-style camera is what you need.
Available in marine grade 316L stainless steel or anodized aluminum, the S435/S1435 is available as an IP camera (IRIS-S435) based on our best-selling S460 camera engine and also in analog/analog HD formats (IRIS-S1435).
The camera features built-in infrared LED illumination for close-range (10m) visibility in the dark and is supplied with 60° wedge adapters to enable you to angle the camera if necessary.
The IP version of the camera (IRIS435) is directly compatible with Raymarine, Navico (Simrad, B & G, Lowrance), and Furuno chart plotters. Compatibility with Garmin MFDs is achieved in conjunction with our CMAC camera management system for boats.
The analog/analog HD version of the camera can interface with all chart plotters supporting composite video in CVBS mode, and when switched to any of the three analog HD modes (AHD, TVI, CVI) interfaces either through our CMAC system or by using an Iris TVIHDMI convertor to provide HD resolution in real-time.
The camera can be supplied with 80°, 120°, and 154° lens options and is ONVIF profile S compliant.
Finally, with an IP68 environmental rating, the camera can also be used below the water line to keep an eye on running gear, film your fishing adventure,s or even attached to a pole and used as an underwater inspection camera.
Features:
- Available in IP or Analogue (CVBS, TVI, CVI, AHD) Formats
- Machined from 316 Marine Grade Stainless Steel or Aluminum
- 3MP HD Resolution (IP Models)
- 2MP HD Resolution (Analogue Model (TVI, CVI or AHD mode)
- SD Analogue (CVBS) format 1000TVL Resolution
- Compatible with Raymarine / Axiom (LH2 and Higher)
- Compatible with Furuno TZT / TimeZero 4.1
- Compatible with Navico MFDs Inc. SIMRAD, Lowrance, and B & G
- Compatible with CMAC for use with Garmin MFD’s
- Built In Infra Red LED Illumination (8m Range)
- PoE Option (IRISS460 IP Model)
- Use Above or Below Water Level
- IP68 Environmental Protection
Technical Specifications:
- Format - IP
- Resolution - 2304 x 1296
- Horizontal Field of View - 80°
- Interface - RJ45 10/100 Base T Ethernet / Setup through Browser
- Video Processing - H.264 / H.265 Codec / Dual Stream (Main / Substream) 3 Instances Max
- Protocol/Video Format - TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF
- Onvif - Profile S v2.4
- Bitrate - VBR / CBR 32kbps 8Mbps
- Illumination - 6 x 850nm Infra Red - 10 meter Range / Available with White LED Illumination on Request
- Mirroring - Horizontal & Vertical - Configure via Browser Interface
- Operating Temperature - -30 - +60°
- Connections - Water Resistant RJ45 Socket (Field Installable Backshell Supplied) / Non-PoE with 2.5mm DC Power Socket
- Material - 316L Marine Grade Stainless Steel / Aluminum Option Available
- Power - PoE IEEE802.3af / 12VDC <200mA Max
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Riptide Terrova® QUEST™ 90/115 Trolling Motor with Wireless Remote - 24/36V - 90/115LBS - 100" *Remanufactured
Riptide Terrova is the hardest-working firstmate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term "day off". With available shaft lengths up to 100", Riptide Terrova comes ready to go where other trolling motors won't. The QUEST series of dual 24/36 volt brushless trolling motors was designed for anglers who demand the best from their equipment, even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before.
QUEST Series
These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors, and software, taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.
Stow/Deploy Lever
Press this lever on the mount, and fall-away ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Auto Park helps the motor stow effortlessly by orienting the lower unit to the perfect stow position automatically.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.
Part of the One-Boat Network
Out of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated setup procedures.
Spot-Lock with Jog
Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction.
Drift Mode
automatically engages speed and course control simultaneously, meaning anglers no longer need to depend on drift socks, kicker motors, or manual operation to control speed over water, even in the heaviest wind and current.
Real-time Battery Monitoring
Check battery power levels while the motor is in use, real-time "time until empty" display monitor, with a notification when battery power is reduced to 20% to prompt users to enter "Eco-mode," which can reduce current draw to extend battery life.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Mobile App Compatibility
Control your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.
Specifications:
- For Use In: Saltwater
- Shaft Length: 100"
- Voltage: 24/36
- One-Boat Network Compatible: Yes
- QUEST Series: Yes
- Spot-Lock: Yes
- Foot Pedal Style: Not included
- Control: Wireless remote
- Auto/Stow Deploy: No
- Power Trim: No
- Power Steering: Yes
- Lift-Assist: No
- Bowguard: No
- Wireless Remote: Yes
- AutoPilot: Yes
- CoPilot: No
- Speeds: Variable
- Digital Maximizer: Yes
- Battery Meter: Yes
- Max Amp Draw: 58
- Mount Style: Bolt-On
- Mounting Location: Bow-mount
- Motor Style: Electric-steer
- Prop: Power Prop (MKP-40)
- Warranty: One-year warranty
Specifications:
- Autopilot: Yes
- Built-In Transducer: No
- Control Type: Wireless Remote
- Included Propeller: MKP-40
- Mounting Style: Bow
- Salt Water/Fresh Water: Salt
- Series: Riptide Terrova
- Shaft Length (Inches): 100"
- Thrust (Pounds): 90/115 lbs
- Voltage - Input Range (Volts): 24v or 36v
- Box Dimensions: 15"H x 19"W x 118"L WT: 110 lbs
- UPC: 029402052004
SmartPlug 50 AMP Dual Configuration Cordset - 25 [C50254]
50 AMP Dual Configuration Cordset - 25'
For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside. Those days are changing with the introduction of SmartPlug's new dockside product offering. SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology.
The 50 AMP 125/250 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a Twist Type Dockside connector.
Features:
- Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
- Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
- LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights. One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
- Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.
Technical Specifications:
- Length - 25'
- Color - Orange
- Boatside Connection - 50 AMP/125/250 V SmartPlug
- Dockside Connection - 50 AMP/125/250 V Twist Type Plug
*Sold as an Individual
Specifications:
- Amperage: 50a
- Length: 25'
- Type: Cordset
- Voltage: 125/250v
- Box Dimensions: 9"H x 19"W x 19"L WT: 23 lbs
- UPC: 682500440151
Riptide Instinct QUEST™ 90/115 Trolling Motor with Wireless Remote - 24/36V - 90/115LBS - 100" - White
Big water, bigger boats – that’s where Instinct comes in. A motor is designed not just to handle the elements but to thrive in them. With the most dependable automatic stow and deploy ever built, Instinct comes ready to go where other trolling motors won't. The new QUEST series of dual 24/36 volt brushless trolling motors were designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, Instinct is ready to tackle the elements where the waves are high – and so are the stakes.
QUEST Series
These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors, and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.
Auto Stow & Deploy
Stow or deploy Instinct by pushing a button on your wireless remote, foot pedal, the One-Boat Network App, or Humminbird fish finder.
Power Trim
Trim Instinct up or down at the push of a button — on either the foot pedal, the wireless remote, the One-Boat Network App, or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Instinct uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Instinct's wireless remote.
Part of the One-Boat Network
Out of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated set-up procedures.
Spot-Lock with Jog
Spot-Lock will hold you in place with unparalleled GPS accuracy. Spot-Lock allows you to stay right on top of any productive fishing spot, without touching your trolling motor. With the built-in heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction.
Drift Mode
Gives you point-and-shoot navigation for superior boat control in any direction, at any speed without the need for drift socks, kicker motors, or manual operation – even in the heaviest wind and current.
Real-time Battery Monitoring
Check battery power levels while the motor is in use, real-time “time until empty” display monitor, with a notification when battery power is reduced to 20% to prompt users to enter “Eco-mode” which can reduce current draw to extend battery life.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.
Mobile App Compatibility
Control your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.
What's included
Instinct 90/115 lb. 100" trolling motor, Wireless remote, Lanyard, MKP-40 Prop, 30' Ethernet cable, Humminbird HELIX adapter cable, and Mounting Hardware
Specifications:
- For Use In: Saltwater
- Shaft Length: 100"
- Voltage: 24/36
- One-Boat Network Compatible: Yes
- QUEST Series: Yes
- Spot-Lock: Yes
- Foot Pedal Style: Heel-Toe / Electric
- Control: Wireless remote
- Auto/Stow Deploy: Yes
- Power Trim: Yes
- Power Steering: Yes
- Lift-Assist: No
- Bowguard: No
- Wireless Remote: Yes
- AutoPilot: Yes
- CoPilot: No
- Speeds: Variable
- Digital Maximizer: Yes
- Battery Meter: Yes
- Max Amp Draw: 60
- Mount Style: Bolt-On
- Mounting Location: Bow-mount
- Motor Style: Electric-steer
- Prop: Power Prop (MKP-40)
- Warranty: Two-year warranty
Specifications:
- Built-In Transducer: No
- Control Type: Wireless Remote
- Included Propeller: MKP-40
- Mounting Style: Bow
- Salt Water/Fresh Water: Salt
- Series: Riptide Instinct
- Shaft Length (Inches): 100"
- Thrust (Pounds): 90/115 lbs
- Voltage - Input Range (Volts): 24v or 36v
- Box Dimensions: 14"H x 18"W x 117"L WT: 117 lbs
- UPC: 029402050390
Owner's Manual (pdf)
Rotary Polisher Bigfoot LH19E Complete Kit
Featuring a high torque motor, compact design, premium ergonomics, and a lightweight housing, the LH 19E is one of the most capable and maneuverable rotary polishers on the market. Its lightweight and powerful design makes it the ultimate rotary polishing solution for a variety of industries, including automotive detailing, collision repair and refinishing, marine, and more.
ROTARY
A rotating disc rotates on a central axis, with the highest velocity being at the rim's edge. Rotary tends to be the most invasive movement on the surface, generating substantial friction and heat, which can lead to burns, strike-throughs, and rotary-induced swirl marks if used improperly. In the hands of a skilled technician, a rotary tool features the lowest vibration levels of any tool movement, but can take a great deal of time to learn to use the tool properly. Rotary movement is most commonly used for polishing operations.
ANTI-VIBRATION LOOP HANDLE
An innovative loop handle allows users to hold the polisher securely at different angles for precision and stability during the polishing process. The soft grip material and the special design absorb and dissipate vibration to improve operator comfort as well as protect delicate surfaces from damage. The loop handle is included standard with each tool.
ANTI-VIBRATION SIDE HANDLE
A soft grip side handle reduces the vibration during the polishing operation and provides comfortable control of the polisher. Featuring a design and the specialized materials to absorb and dissipate the vibration from the machine, the handle can be added to either side, depending on operator preference, and is included with the polisher DLX Kits.
9 METERS ELECTRICAL CORD
The Heavy Duty extra long 9mt cord is gauged to deliver maximum power to the polisher for safe, efficient operation. The longer cord save you time, steps and hassles since the user doesn’t have to use additional extension cords when polishing around a car.
ELECTRONIC SPEED CONTROL DIAL
A variable speed dial provides the ability to adjust speeds for specific applications. The dial features larger numbers, a click sensation to indicate speed changes, and is positioned for effortless adjustment during the polishing process.
PROGRESSIVE TRIGGER
Adding an additional level of control, the LH19E includes a progressive trigger. This trigger acts as a throttle allowing the operator to control speeds within the dial range to deliver the exact desired speed and to adjust quickly as needed without interruption to the work process.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.Specifications:
- Type: Tools & Accessories
- Box Dimensions: 10"H x 13"W x 22"L WT: 17.5 lbs
- UPC: 850007056360
Brochure (pdf)
Edge 45
Freshwater Bow-Mount
#1355946
Edge lets you step right up to treacherous stump fields, tangled weed beds, or punishing wind and waves. Big challenges like those usually mean bigger fish. And when you've got the unrelenting, rugged construction of Edge - available in foot or hand control models - you've got the power to rise to the occasion.
The updated motor mounts on the Edge motors feature an extruded upper arm made from marine-grade anodized aluminum that is built for years of trouble-free use.
The Edge cable-steer motors feature a redesigned motor head that is constructed of highly impact-resistant, hybrid composite material for unmatched durability. The head also integrates a high-visibility directional indicator. And the ultra-responsive foot pedal is ergonomically designed for precise speed and steering control.
Edge motors also utilize a Latch & Door mounting system for easy removal of the motor for security and storage. Adding to its ruggedness, The Edge has a composite shaft that is guaranteed for life
Edge Mount
Features an extruded, anodized aluminum arm that's built with uncompromising strength. It also features rock-solid stowing and a Latch & Door design for easy removal.
Latch & Door Design
Edge's innovative Latch & Door Design makes it easy to remove the motor from the mount. It's perfect for safe and secure storage, and features a soft grip knob.
Directional Indicator - Edge
The easy-to-read directional indicator leaves no doubt about where you're headed. Available on foot control models only.
Foot Pedal
Get wired to the water with our ultra-responsive foot pedal. Its new design is easier to operate, with more room for your foot and more exact speed control. Included on select models.
5 Speed
provides five speed settings to easily choose the speed you need for simple, intuitive control that puts you in command.
Cool, Quiet Power
Nothing runs cooler or more quietly than a Minn Kota. Our extra large winding's and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise. So quiet, they'll never hear you coming.
Propeller
Power Prop: Delivers extra power to help you push through heavy vegetation to get you where the fish are.
Advantage Minn Kota
Indestructible Composite Shaft: Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to guarantee it for life.
Cool, Quiet, Power:Nothing runs cooler or quieter than a Minn Kota. Our extra large winding's and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise.
2-Year Warranty
This motor is backed up with Minn Kota’s two-year warranty.
Included
Edge 45 lb. 36" foot-control trolling motor, MKP-2 Prop, Hold Down Strap and Mounting Hardware.
Specifications:
- Control: Cable Steer Foot Pedal
- Volts: 12
- Max Thrust: 45 lbs.
- Shaft Length: 36"
- Speed Control: 5-Speed
- Max. Amp Draw: 42
- Prop: Power Prop (MKP-2)
Specifications:
- Included Propeller: MKP-2
- Autopilot: No
- Control Type: Foot Control
- Mounting Style: Bow
- Salt Water/Fresh Water: Fresh
- Shaft Length (Inches): 36"
- Thrust (Pounds): 45 lbs
- Built-In Transducer: No
- Voltage - Input Range (Volts): 12v
- Series: Edge
- Box Dimensions: 10"H x 21"W x 63"L WT: 45 lbs
- UPC: 029402036264
Owner's Manual (pdf)
50A 125V Cordset
EEL ShorePower Cordsets
One Hand. A simple twist. Full Power.
The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.
Features:
- Designed for use with standard inlets (NEMA)
50A, 125V capacities; 50' length
- Cord sets meet global industry standards including ABYC and UL
- New wing-clamp technology provides a true, watertight connection every time
- Single-handed operation
- Eliminates the need for a sealing ring
- Secondary locking feature for added security
- Built-in LED cord light guides you to a secure connection every time, even in the dark
Specifications:
- Voltage: 125v
- Type: Cordset
- Length: 50'
- Amperage: 50a
- Box Dimensions: 9"H x 17"W x 19"L WT: 35.4 lbs
- UPC: 093344051722
Owner's Manual (pdf)
Shock Absorber Seat - P Series - DNM Silver V2
The SHOCK-WBV P-Series is specifically designed, tested, and manufactured in the UK to provide comfort by reducing whole-body vibration.
It’s a straightforward process to retrofit a P-series system. Once it’s in place, the system is simple to adjust for a wide range of passenger weights and sea conditions. It provides a smoother, safer ride because shock and vibration are significantly reduced, meaning a longer time can be comfortably spent on the water.
Specifications:
- Color: DNM silver V2
- Travel: 84mm (3.32 in.)
- Vertical: 72mm (2.83 in.)
- Horizontal: 43mm (1.69 in.)
- Unit Weight: 3.9kg (8.60 lbs.)
Showing 256/706
Next