Above $500

Balmar Regulator Kit f/Valeo w/MC-618 [MC-618-VL-01]

Regulator Kit for Valeo with MC-618

Balmar's MC-618 Regulator communicates with the SG200 Battery Monitor to provide information to the SG200 Color Display and Smartphone App.  Now you can see how the MC-618 Regulator is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth Smartphone App.  Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App, or the traditional on-regulator programming tool.  Advanced Programming functions are available from the Bluetooth Smartphone App.  Balmar customers have been asking for years to view regulator information from outside the engine compartment.  Balmar has accomplished this goal without the need for a separate dedicated display device!

Kit Includes:  

• 30-SR12-02 Internal Smart Ready® Regulator Conversion Kit
• MC-618 External Regulator
• Wire Harness
• MC-TS-A & MC-TS-B Temp Sensors

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Skylla-IP65 24/35 3-Bank 120-240VAC Battery Charger

A powerful, waterproof and intelligent battery charger with a 7-stage adaptive charge algorithm, suitable for a wide range of battery types and chemistries featuring a dedicated Lithium-ion charge algorithm.

The wide range universal input voltage adds flexibility to the installation, the charger will maintain its full output power no matter where it is located in the world.

The IP65 rating makes this charger especially suitable for marine, mobile, and industrial applications and it can withstand the rigors of an adverse environment: heat, humidity and salt air.

Both models are available in two versions:

• 3 full rated outputs
• 1 full rated output together with an isolated 3A trickle charge output for a starter battery

Models:12V/70A & 24V/35A

Specifications:

• Portable: No
• Charging Banks: 3
• Charger Output Voltage: 24v
• Charger Output - Amps: 35a
• Charger Input - Voltage: 120/240v
• Box Dimensions: 10"H x 15"W x 19"L WT: 17.5 lbs
• UPC: 8719076051992

Siren 3 Pro Vessel Management Device 

Features:

• Providing the ultimate smart boating experience that keeps you connected to your boat 24/7, regardless of boat size, type or use
• The Siren 3 Pro provides the modern boating experience by going beyond basic marine GPS, radar & radio solutions to complement your multi-function display (MFD) with Connected Boat® Technology
• Together with our easy-to-use App plus global cellular & optional satellite connectivity, our smart boat device connects you to your boat anytime, anywhere
• Make your life easier by controlling your boat's lights, A/C & digital switching systems remotely from the palm of your hand
• The Siren 3 Pro provides a better boating experience with remote monitoring, helping your boat stay safe, secure & ready to enjoy

Standard Features:

• Battery Monitoring (Can monitor up to 2 battery banks, if additional banks are required the Siren Marine Battery Sensor will need to be added.)
• GPS Position/Geofence
• NMEA 2000
• Digital Switching
• 4G LTE

Features with Add-On Sensors & Accessories:

• Engine Metrics
• Connected Fluid Tanks
• Security/Entry
• Bilge
• High Water
• Shore Power
• Temperature
• Satellite Compatible
• Wireless Sensors 3.0

Autotransformer - Split Phase 120/240V - 100AMP

The Autotransformer: for step up, step down and split phase balancing An autotransformer can be used for step up, step down and split phase output balancing purposes. While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention. 

Consider for example a 30A 120/240V split phase supply. The supply could be the grid, a generator or two stacked inverters. Some of the loads connected are 240V, others are 120V. On each 120V leg the load should not exceed 30A. The problem is that as soon as 120V loads are connected, the two legs will show a different current. This is because the 120V loads on the two legs will never be balanced. A 120V 1200W hairdryer, for example, will draw 10A from one leg. A 120V washing machine could even draw in excess of 20A from one leg. Between the two legs the difference in current, or current unbalance, will therefore often be 20A or more. This means that the 30A supply will not be used up to its full potential. By the time one leg draws 30A, the other leg may be drawing no more than 10A, and increasing the 240V load, for example, will result in an overload of one leg while the other leg still has spare capacity. Theoretically, the total power that can be drawn from a 30A 120/240V supply is 30 x 240 = 7,2 kVA. In case of 20A unbalance, the practical maximum will be 30 x 120 + 10 x120 = 4,8kVA, or 67% of the theoretical maximum. The solution is an Autotransformer. By leaving the neutral of the split phase supply unused, and connecting an Autotransformer to create a new neutral, as shown in figure 1, any load unbalance is ‘absorbed’ by the Autotransformer. In case of a 30A supply, the load can be increased to 7,2kVA, and a 20A load unbalance will result in one leg supplying 40A, and the other leg 20A. The 20A difference will flow through the neutral and the windings of the Autotransformer. The current through both 120V wires of the split phase supply will be 30A. 

Temperature protected In case of overheating, the Autotransformer is disconnected from the supply. Reset is manual. Ground relay for use with Multi or Quattro Inverter/Chargers included When operating in inverter mode, the neutral output of the inverter/charger must be connected to ground to guarantee proper functioning of a GFCI. In case of a split phase supply the neutral must be grounded. For this purpose a grounding relay is built in the autotransformer’s enclosure. The relay is controlled by the 230/240V Multi or Quattro. (The internal grounding relay in the 230/240V Multi or Quattro must be disabled) 

An alternative to stacked inverters The alternative to stacking two 120V inverters to provide a 120/240V split phase supply is a 240V inverter with an additional Autotransformer.

Warranty Info

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Amperage: 100a
• Box Dimensions: 8"H x 13"W x 20"L WT: 30.55 lbs
• UPC: 8719076022428

Balmar Pulley Kit f/Yanmar 4JH2-TE, 4JH2-HTE, 4JH2-DTE 4JH2-UTE [48-YSP-4JH-E]

Pulley Kit for Yanmar 4JH2-TE, 4JH2-HTE, 4JH2-DTE 4JH2-UTE

AltMount®Serpentine Pulley Conversion Kit for Yanmar Diesel Engines

Yanmar Engines Covered: 4JH2-TE -HTE -DTE -UTE

Kit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 47″ Circumference Serpentine Belts (one spare) & Mounting Hardware

Note: If you specify an AT-200A Alternator, a longer belt length may be required.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Whale Seaward 6 Gallon Hot Water Heater - White Epoxy - 120V - 1500W [S600EW]

Seaward 6 Gallon Hot Water Heater - White Epoxy - 120V - 1500W

Whale Electric Water Heaters includes model with the very latest technology. All heaters are manufactured from the highest quality materials and designed to specifically withstand harsh marine conditions.

The White Epoxy Coated Aluminium cases are well-suited to installation in many of today’s engine rooms. Their white appearance blends in well with existing equipment and the coated aluminium material offers corrosion resistance.

Features and Benefits: 

• Horizontal Mounting only  
• Robust Manufacturing
• Hold down brackets welded to inner tank
• Double wall heat exchangers
• Safety controls  
• Integrated pressure relief valve
• Temperature and pressure drain tube included
• Magnesium anodes available separately
• Recommended to prevent corrosion and ensure a longer Water Heater life
• Sturdy, robust exteriors
• Ignition protected

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Gallons: 6
• Heat Exchanger: No
• Volts: 120v
• Box Dimensions: 14"H x 14"W x 22"L WT: 17.8 lbs
• UPC: 766478948212

Owner's Manual (pdf)
Brochure (pdf)

Airmar B75M Bronze Chirp Thru Hull 20 Tilt - 600W - Requires Mix and Match Cable [B75C-20-M-MM]

B75M Bronze Chirp Thru Hull 20° Tilt - 600W

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

• Depth & fast-response water-temperature sensor
• Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
• 20° tilted version, 600W
• 50 kHz of total bandwidth from one transducer
• Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
• Bronze transducer housing
• Boat Size: Up to 8 m (25’)
• Hull Type: Fiberglass or wood
• Exclusive Xducer ID® technology

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Mounting Style: Thru-Hull
• Chirp: Medium
• Box Dimensions: 5"H x 8"W x 12"L WT: 6 lbs
• UPC: 801769001792

Airmar B75M Bronze Chirp Thru Hull 12 Tilt - 600W - Requires Mix and Match Cable [B75C-12-M-MM]

B75M Bronze Chirp Thru Hull 12° Tilt - 600W

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

• Depth & fast-response water-temperature sensor
• Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
• 12° tilted version, 600W
• 50 kHz of total bandwidth from one transducer
• Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
• Bronze transducer housing
• Boat Size: Up to 8 m (25’)
• Hull Type: Fiberglass or wood
• Exclusive Xducer ID® technology

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Chirp: Medium
• Mounting Style: Thru-Hull
• Box Dimensions: 5"H x 8"W x 12"L WT: 6.1 lbs
• UPC: 801769001785