Above $500

Bennett AutoTrim Pro f/Electric Trim Tabs [AP000A1BC]

AutoTrim Pro for Electric Trim Tabs

An all-in-one trim tab control system combining a myriad of essential features… Automatic Trim Tab Control, Manual Trim Tab Control, and Trim Tab Position Indication… all combined into an easy-use, space-saving keypad. It’s like cruise control for your tabs

AutoTrim Pro automatically levels the pitch and roll of your boat, adjusting your trim tabs to changes in vessel speed, sea conditions and shifting weight. …And you can take full manual control anytime with the touch of a button. It’s like cruise control for your boat.

This affordable solution can be added to most existing Electric trim tab systems. It’s fully compatible with all Bennett systems, and most others. Installation is simple and straightforward.

Features & Benefits

Auto Trim Tab Control: Easily store 2 favorite automatic running attitudes in memory. See real-time AutoTrim Pro adjustments with LED indication

Manual Tab Control with Automatic Override: Just push anywhere on the bow up or down buttons and you’re in full manual command of the trim tabs

OEM Customizable Response Time: Configure response time to engine power, hull type, actuator type or trim tab size

Trim Tab Position Indication: L.E.D. indicators equipped with adjustable light intensity

One-touch Manual Full Up and Full Down Buttons: Down for hole-shot, up for running in a following sea, or coming into the beach

Automatic Tab Retraction: Retract trim tabs to full up position when the boat’s ignition is switched off, protecting tabs during storage and trailering

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Quick Guide (pdf)
Owner's Manual (pdf)

OceanLED Sport S3124s Underwater LED Light - Ultra White/Midnight Blue [012103BW]

Sport S3124s Underwater LED Light - Ultra White/Midnight Blue

The OceanLED Sport series is the perfect choice for fishing and cruising in small to medium sized boats.

Advanced optics, designed exclusively by OceanLED create an optically efficient 90°surface beam angle with a focused 20° side beam displaying a striking amount of water penetration and a significantly larger illuminated area. With twice the amount of LEDs as its competitors, the dual color S3124s is the leader in its class. Simply toggle the power between white, blue, strobe and fade modes.

Features:

• 3000 Fixture Lumens
• 90°/20° Beam Angle
• Compact and simple design
• Simple to install
• Easy to clean
• Fish-Strobe Mode
• Fade Mode

Specifications:

• Warranty: 2 years

Specifications:

• Mounting Style: Surface
• Color: White/Blue
• Material: AB2 Aluminum Bronze
• Box Dimensions: 3"H x 6"W x 6"L WT: 1.6 lbs
• UPC: 5051803007319

Quick Guide (pdf)
Brochure (pdf)

Bennett BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12" [BOLT1212ED]

BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12" 

Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.

Kits Include:

• (2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000)
• (2) Stainless steel trim planes (tabs) and mounting plates
• (2) 20' wire harnesses with waterproof connectors (BAW2020)

Features:

• Requires less than 6.5" of vertical transom space to install
• Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence
• Controls sold separately 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 7"H x 14"W x 15"L WT: 22.6 lbs
• UPC: 666285600283

Ancor White Triplex Cable - 10/3 AWG - Flat - 300' [131130]

White Triplex Cable - 10/3 AWG - Flat - 300'

Features:

• Ancor Triplex Cable is made to surpass the highest UL Boat Cable standards with ultra flexible (Type 3/Class K) stranding to resist fatigue due to vibration and flexing.
  
• Outer jacket is made for easy removal and provides the best abrasion resistance available
  
• Ancors proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion.
  
• Features three Marine Grade™ primary conductors (white, black and green) in a white common jacket.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Length (Feet): 300'
• Gauge: 10/3 AWG
• Color: Black/Green/White
• Box Dimensions: 11"H x 11"W x 11"L WT: 49 lbs
• UPC: 091887132021

Whale Seaward 11 Gallon Hot Water Heater w/Rear Heat Exchanger - Stainless Steel - 120V - 1500W [S1200]

Seaward 11 Gallon Hot Water Heater with Rear Heat Exchanger - Stainless Steel - 120V - 1500W

Whale Electric Water Heaters includes models with the very latest technology. All heaters are manufactured from only highest quality materials and designed to specifically withstand harsh marine conditions.

Water Heaters with a Stainless Steel covers offer high levels of corrosion resistance with a modern stainless steel finish. These heaters are a bit lighter than those wearing the galvanized outer cover and heavier than the epoxy coated versions.

Features and Benefits

• Multiple versions to suit your installation
• Robust Manufacturing
• Safety controls
• Magnesium anodes available separately
• Sturdy, robust exteriors
• Ignition protected

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Gallons: 11
• Heat Exchanger: Yes
• Volts: 120v
• Box Dimensions: 17"H x 17"W x 26"L WT: 33 lbs
• UPC: 766478947932

Actisense NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine Gateway [EMU-1-BAS]

NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine Gateway

Share engine information on the NMEA 2000 bus.

The Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts data from analogue engine gauges/senders into NMEA 2000 data. The EMU-1 enables the sharing of engine data throughout the NMEA 2000 bus. It digitizes analogue engine sensors, enabling NMEA 2000 display devices to monitor the connected engine(s) on a vessel.

The EMU-1 can monitor vital engine parameters such as temperature, pressure RPM and fluid levels from up to two engines.

The EMU-1 has a PC-based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models.

An Actisense PC to NMEA 2000 Gateway (NGX-1/NGT-1) is required to configure the EMU-1.

The NGX-1 or NGT-1 must be used to update the firmware, connect the Toolkit and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGX-1 page and/or NGT-1 page for product details.

Features:

• Enables analogue signals to be converted to NMEA 2000 messages
• Convert signals from up to two engines (that share a common ground) with a single EMU-1
• 6 gauge / parameter inputs
• 4 alarm inputs
• 2 additional auxiliary inputs
• 2 Tacho inputs
• Customized IP65 case
• Diagnostic LED’s
• Wide power compatibility of 9 to 35VDC
• No need to change an existing engine
• Easy installation
• Easy to configure to suit the connected engine
• Connect signals from fluid level gauges (that share a common ground with the engine) to NMEA 2000®
• Optional DIN rail mounting kit available
• Total engine hours are logged by the monitoring of engine Tach (RPM) input

Technical Specifications:

Power Supply

• Supply Voltage - 9 to 35VDC
• Supply Current - Typically < 25mA @ 12VDC
• Supply Protection - Continuous reverse polarity protection and load dump protection (meets SAE J1113)
• Supply Connector - Pluggable 2-way screw terminal, 3.5mm pitch
• Supply Voltage (NMEA 2000 Port) - 9 to 29VDC
• Supply Current (NMEA 2000 Port) - < 20mA @ 12VDC from NMEA 2000 bus
• Load Equivalent Number (LEN) - 1
• Supply Protection (NMEA 2000 Port) - Continuous reverse polarity protection and overvoltage protection to 40V

NMEA 2000 Port – In/Out

• Compatibility - Fully NMEA 2000 certified
• Galvanic Isolation - 2500V input to ground, 1500V output to ground using ISO-Drive
• Speed / Baud Rate - 250kbps
• NMEA 2000 Connector - M12 male (A coded) connector

Gauge Inputs

• Voltage Range - 0 to 35VDC
• Input Impedance - > 50kΩ
• Sender Feed - 0, 4 or 18mA
• Accuracy - <= 2%
• Input Connector - Pluggable 6-way screw terminal, 3.5mm pitch
• Input Protection - Overvoltage protection to ±40V

Alarm Inputs

• Voltage Range - 0 to 37VDC
• Input Impedance - > 50kΩ
• Threshold Voltage - Configurable, default is 5V
• Alarm Polarity - Configurable, default is alarm on low input
• Accuracy - <= 2%
• Input Connector - Pluggable 4-way screw terminal, 3.5mm pitch
• Input Protection - Overvoltage protection to ±40V

Tacho Inputs

• Voltage Range - ±3 to ±60V
• Input Impedance - > 100kΩ to ground
• Input Pulse Range - 4 to 50,000Hz
• Accuracy - <= 1%
• Sender Compatibility - Ignition coil, alternator (“W”, “R” or “AC”) terminal, hall effect, VR or inductive sender
• Threshold - Automatically adjusts to signal level
• Input Connector - Pluggable 4-way screw terminal, 3.5mm pitch
• Input Protection - Can withstand an ignition pulse to ±500V

Engine Log

• Engine Hours - 2 separate engine hour logs internally connected to the tacho Inputs. Hours are logged when RPM is present, stored in non-volatile memory

Mechanical

• Housing Material - Polycarbonate
• Protective Lid Material - Polycarbonate
• Sealing Materials - Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof vent
• Dimensions - 127mm (L) x 112mm (W) x 48mm (H)
• Weight - 250g
• Mounting - 4 x 3.5mm lugs to allow panel mount with self tapping s/s screws (included), optional DIN Rail mount available on request

Approvals and Certifications

• EMC - EN 60945 (sections 9 & 10)
• Environmental Protection - IP66 (PCB housing)
• Operating Temperature - -20°C to +55°C
• Storage Temperature - -30°C to +70°C
• Recommended Humidity - 0 – 93% RH
• Guarantee - 3 years

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Data Interface: NMEA 2000
• Box Dimensions: 3"H x 6"W x 9"L WT: 1 lbs
• UPC: 5060998710331

Owner's Manual (pdf)
Brochure (pdf)

TACO Flex Vinyl Rub Rail Kit - Black w/Black Insert - 70' - 1-7/8" x 1-1/16" [V11-2423BBK70-2]

Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' -
1-7/8" x 1-1/16"


Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide..

Features:

• Black with Black Insert
  
• Vinyl
  
• Rub Rail Kit
  
• 1-7/8" x 1-1/16"
  
• 70'

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Quick Guide (pdf)

TACO 15' Telescopic Outrigger Poles HD 1-1/2" - Silver/Silver [OT-0542VEL15-HD]

15' Telescoping Outriggers 1-1/2" Diameter

Telescopes to less than 6 feet for bridge clearance, trailering and storage. Designed for universal use with Grand Slams, Sport Slams, Striker Bases, and other brands of mounts that accept 1-1/2" butt end diameter outriggers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Anodized Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver/Silver
• Length (Feet): 15'
• Box Dimensions: 6"H x 9"W x 75"L WT: 13.5 lbs
• UPC: 630838011772

Brochure (pdf)