Above $1000

KillerDock “LiL Killa”

4′ Standard or Upgrade to a 5′ table

If you don’t need all of the bells and whistles of our Upscale or Slam models, the “Lil Killa” is the perfect station for you. Made with an all HPDE King Starboard cutting surface and paired with our stylish coated aluminum legs and overbuilt base plates, these stations are both sexy and STRONG!. Standard width is 48″ OR upgrade to the 60″wide table. Each station is 30″ deep which gives it almost 30% more workspace than most other stations on the market. The built in 2 degrees of slope provides the perfect amount of flow to the slotted drains in the back of the table and our accessory tray provides a built-in knife sharpener, cup holder, knife holder and hose nozzle holder. The “Lil Killa” will not disappoint and will be a great addition to your dock, seawall, deck or patio.

Standard Features Include

• Anti Corrosion Clear coating on the legs
• One accessory tray on the right side

KillerDock Slam 3 1/2

Marine Grade Aluminum – with anti-corrosion clear coating.

You can install it on any surface!

For INSTALLATION instructions, click HERE. INSTALLATION Video, click HERE.

There are 2 hose stations built into your Slam fish cleaning station. You are responsible for connecting your plumbing to your hose stations. Most people run the plumbing line up the inside of one of the uprights, use a “T” for the first hose station, and then under the table, across to the second hose station. Each included brass valve is ready to receive ¾” PEX pipe.

All KillerDock products are now protected by a unique anti-corrosion clear coating that has been created to protect metal against highly adverse environments. Our industrial two component resin-based clear coating solution is considerably better than other solutions like powder coating and ceramic, which have their own deficiencies and limitations. It is not simply a clear coating, but chemically reinforced to make it stronger and more durable. You can trust that your KillerDock product will be protected for many years to come. It keeps the aluminum looking great, and makes cleaning/washing a breeze.

Included: two accessory trays (Right and left side). Each with a cup holder, hose hanger, knife sharpener, and knife slot.

King Starboard cutting surface and accessory trays – NOW COMES STANDARD WITH GRAY KING STARBOARD

SolaMesh Canopy Canvas (19 colors to choose from)

Wind-rated for 150 mph. (We recommend removing the canvas for the worst storms, which will remove most of the wind resistance.)

For most applications, it installs to the edge of your dock with lag bolts or concrete wedge anchors. All of our hardware is 316 grade Stainless Steel, the highest grade on the market.

For the 90º Base option, you will mount the uprights to the edge of your dock or seawall. This works for wood or concrete, and will include the appropriate mounting hardware. You will need a clean 90 degree edge, therefore you may need to trim down any overhanging or trim boards just where the legs connect. For the Flat Base option, you will mount the uprights to the surface of your dock or seawall. This gives most flexibility on placement, and works for wood or concrete, and will include the appropriate mounting hardware. The optional Under Mount SINK is a rounded rectangle sink that is 12” wide, 18” long, and 8” deep. It has the same clear coated Marine Grade Aluminum, and comes with a standard 1 ½” sink strainer, for you to add your own plumbing to be directed wherever you need it to drain. The optional Under Mount Drawer has the same clear coated Marine Grade Aluminum and King Starboard as our fish cleaning stations. Outside dimensions of drawer 16”x”19.5”x5”

KillerDock Upscale 6 1/2

Marine Grade Aluminum – with anti-corrosion clear coating.

KillerDock took what had for generations been an afterthought on docks across the globe and turned it into a masterpiece. We scrapped the wood, rusty steel nails, old T-tops, repurposed cabinets and used countertops. In their place we put a hand-crafted work of art that is ergonomically sound, build like a tank and will leave your neighbors with dock envy. This station is built to last a lifetime!

Each station is handmade in the USA using only the best materials. Engineered and fabricated by fishermen with a lifetime of experience both on the water and in the fab shop. We use marine grade aluminum, best in class protective coating (no regular maintenance required), king starboard cutting surface, 316 stainless hardware and many other top-quality materials. These stations are engineered to withstand 150 mph winds and “field testing” has proved they will withstand MUCH more!

Our standard features allow each customer to tailor their order to meet their individual needs. We can, however, make custom stations upon request.

*** For INSTALLATION information, click ——> HERE.

*** Winterization Instructional Video, click ——> HERE.

For the plumbing, you are responsible for connecting your plumbing to the bottom of the table leg. The coupling for each hose station is 3/4” Female NPT. We suggest using a brass 3/4” male NPT connector to transition to your plumbing material. These are readily available at any large home improvement store.

All KillerDock products are now protected by a unique anti-corrosion clear coating that has been created to protect metal against highly adverse environments. Our industrial two component resin-based clear coating solution is considerably better than other solutions like powder coating and ceramic, which have their own deficiencies and limitations. It is not simply a clear coating, but chemically reinforced to make it stronger and more durable. You can trust that your KillerDock product will be protected for many years to come. It keeps the aluminum looking great, and makes cleaning/washing a breeze.

Included: two accessory trays (Right and left side). Each with a cup holder, hose hanger, knife sharpener, and knife slot.

King Starboard cutting surface and accessory trays – NOW COMES STANDARD WITH GRAY KING STARBOARD

For most applications, it installs to the edge of your dock with lag bolts. All of our hardware is 316 grade Stainless Steel, the highest grade on the market.

For the FLAT BASE option, if you also choose Below Dock draining, then the drain pipe will extend 4” through the flat base. You will need to use a 3” hole saw to drill through your top dock boards during install. If you choose Flat Base AND Slotted drain, then the base plate will be flat.

For the 90º BASE option, you will mount the table legs to the edge of your dock or seawall. This works for wood or concrete, and will include the appropriate mounting hardware. You will need a clean 90 degree edge, therefore you may need to trim down any overhanging or trim boards just where the legs connect.

The optional Under Mount Sink is a rounded rectangle sink that is 12” wide, 18” long, and 8” deep. It has the same clear coated Marine Grade Aluminum, and comes with a standard 1 ½” sink strainer, for you to add your own plumbing to be directed wherever you need it to drain.

The optional Under Mount Drawer has the same clear coated Marine Grade Aluminum and King Starboard as our fish cleaning stations. Outside dimensions of drawer 16”x”19.5”x5”

Tylaska Trigger Snap Shackle - T40L - Large Bail (TY1040-L)

Tylaska T40 Snap Shackles are designed for massive sailboats or for towing applications. With a breaking strength of 40,000 pounds, this shackle can handle sail loads on the largest of sailboats. A lanyard can be attached to a hole in the end of the trigger allowing for remote release; an ideal configuration for towing applications. The included locking pin provides extra security from accidental release. The T40 is intended for static load applications only and is NOT approved for lifting applications.

Our Part # TYL-TY1040-L | Tylaska Part # TY1040-L

Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System (GP-PT-400)

The Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System is a complete power system ideal for robust off-grid power. This system includes all solar, inverter, installation hardware, and smart battery components required to have the charging capability from both solar and shore power. Understand your power system more easily with integrated smart technology. This system features mobile app support.

Our Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System (GP-PT-400) has two powerful solar modules that produce 400 watts of solar charging power and will charge your battery with up to 18+ amps of charging current. The PowerTrak-400 also includes the Go Power! GP-IC-3000-12-PKG 3000W Pure Sine Wave Inverter/Charger, a supreme all-in-one unit that combines 3000 watts of pure sine wave AC power with a built-in battery charger and transfer switch.

The Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System (GP-PT-400) can be expanded to accommodate up to 3000 watts of solar with the ability to stack multiple Go Power! 30A MPPT Solar Controllers. Extend your weekend stay and enjoy dry camping freedom without needing a generator. This system is ideal for travelers going off-grid for 1-4 days.

The Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System is best paired with at least one Go Power! 12V 300Ah LifePO4 Lithium Battery (GP-ADV-LiFePO4-300).

Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System (GP-PT-400) Includes:

• 2 panel, 400-watt solar charging kit (ECLIPSE-200 + ECLIPSE-200-E)
• 3000 watt pure sine wave Inverter Charger for AC power (GP-IC-3000), with built-in 100 amp battery charger and 50 amp dual leg transfer switch
• NEW 3” color touch-screen remote display (GP-RVC-DISP-3)
• 30 amp, stackable MPPT, RV-C compatible solar controller (GP-RVC-MPPT-30)
• DC inverter install kit (GP-DC-KIT5)
• 1 x 25′ of solar output cable (#10) red & 1 x 25’ of solar output cable (#10) black
• Mounting hardware (1 x GP-MH-4-KB)
• All wiring connections
• Batteries are sold separately.

Complete Solar & Inverter System Comparison:

Solar Modules & Controller:

Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System (GP-PT-400) Specifications:

Go Power! PowerTrak 400-Watt Solar Panel & Inverter/Charger System (GP-PT-400) Specifications:

Go Power! PowerTrak™ 800-Watt Solar & Inverter/Charger System

The PowerTrak™ 800-Watt Solar & Inverter/Charger System is a complete power system ideal for robust off-grid power. This system includes all solar, inverter, installation hardware and smart battery components required to have the charging capability from both solar and shore power. Understand your power system easier with integrated smart technology. This system features mobile app support.

It has two powerful solar modules that produce 800 watts solar charging power and will charge your battery with up to 30+ amps of charging current. The PowerTrak-800 also includes our 3000 watt Inverter Charger, a supreme all-in-one unit that combines 3000 watts of pure sine wave AC power with a built-in battery charger and transfer switch.

This system can be expanded to accommodate up to 3000 watts of solar with stackable MPPT controllers. Extend your weekend stay and enjoy dry camping freedom without the need for a generator. This system is ideal for travelers going off-grid for 4-7 days.

*Best paired with 600+Ah of Go Power! Advanced Lithium Batteries.