2005 products
Sort by:
2005 products
Go Power! PowerTrak 1200-Watt Solar & Inverter/Charger System
The PowerTrak™ 1200-Watt Solar & Inverter/Charger System is a complete power system ideal for robust off-grid power. This system includes all solar, inverter, installation hardware and smart battery components required to have the charging capability from both solar and shore power. Understand your power system easier with integrated smart technology. Smart features enabled for mobile app support.
It has six powerful solar modules that produce 1200 watts solar charging power and will charge your battery with up to 50+ amps of charging current. The PowerTrak-1200 also includes our 3000 watt Inverter Charger, a supreme all-in-one unit that combines 3000 watts of pure sine wave AC power with a built-in battery charger and transfer switch.
This system can be expanded to accommodate up to 3000 watts of solar with stackable MPPT controllers. Extend your weekend stay and enjoy dry camping freedom without the need for a generator. Ideal for travelers going off-grid for 7+ days.
*Best paired with 900+Ah of Go Power! Advanced Lithium Batteries.
Go Power! 3000 WATT INDUSTRIAL PURE SINE WAVE INVERTER 12V GP-ISW3000-12
The Go Power! 3000 watt Industrial Pure Sine Wave Inverter is the ultimate choice for large loads, capable of powering multiple appliances and electronics.
MODEL: GP-ISW3000-12
Go Power's largest pure sine wave inverter, the Go Power! GP-ISW3000 is the ultimate choice for large loads that demand an exact replica of AC power. The GP-ISW3000 can run any tool or appliance within its wattage range. The GP-ISW3000 is the professionals choice for clean reliable power when you need it.
Ideal for powering multiple appliances, electronic equipment like TVs, stereos, computers, or as a source of emergency backup power, the Go Power! GP-ISW3000 is suitable for a range of applications. This inverter is included in Go Power's largest solar system, the SOLAR EXTREME, which features three solar panels, a converter chargers, transfer switch and all mounting hardware required to install on any RV or long-haul truck.
Tylaska Snap Shackle - Clevis Bail - T50C - Pin Dia: 7/8 in (TY1050-CR)
Tylaska T50 Snap Shackles are the largest trigger-type snap shackle ever made. A lanyard can be attached to a hole in the end of the trigger allowing for remote release; an ideal configuration for towing applications. The included locking pin provides extra security from accidental release. The T50 is intended for static load applications only and is NOT approved for lifting applications.
Our Part # TYL-TY1050-CR | Tylaska Part # TY1050-CR
Tylaska Plunger Style Shackle - Standard Bail - SS20L (TY2020L-S)
Tylaskas SS series lifting hooks are CE marked and feature highly polished 17-4 PH stainless steel components and a robust plunger pin latch design. They are the perfect solution for applications where the elegance of smooth, polished stainless steel is needed in addition to industrial strength and reliability. The SS20L hook is the result of a thorough overhaul of the design and manufacturing process of the classic SS20 sailing shackle. The SS20L is constructed of fully traceable load-bearing components and has undergone a series of comprehensive destructive and non-destructive tests to optimize the design and ensure that the hook can be safely used for overhead lifting. The larger SS40 shackle has undergone the same overhaul and has now been replaced by the lifting-certified SS40L hook. The SS20L and SS40L both meet the requirements to be safely used as lifting accessories as laid out in European Commissions Machinery Directive 2006/42.
Note that the working load limits of these hooks have been dramatically decreased from that of the original SS20 and SS40 sailboat rigging shackles. This is to ensure an adequate factor of safety in lifting applications and to account for the high-cycle fatigue present in towing applications. These working load limits should never be exceeded.
Our Part # TYL-TY2020L-S | Tylaska Part # TY2020L-S
Tylaska Clevis Bail Plunger Style Shackle - SS20L (TY2020L-C)
Tylaska's SS series lifting hooks are CE marked and feature highly polished 17-4 PH stainless steel components and a robust plunger pin latch design. They are the perfect solution for applications where the elegance of smooth, polished stainless steel is needed in addition to industrial strength and reliability. The SS20L hook is the result of a thorough overhaul of the design and manufacturing process of the classic SS20 sailing shackle. The SS20L is constructed of fully traceable load-bearing components and has undergone a series of comprehensive destructive and non-destructive tests to optimize the design and ensure that the hook can be safely used for overhead lifting. The larger SS40 shackle has undergone the same overhaul and has now been replaced by the lifting-certified SS40L hook. The SS20L and SS40L both meet the requirements to be safely used as lifting accessories as laid out in European Commissions Machinery Directive 2006/42.
Note that the working load limits of these hooks have been dramatically decreased from that of the original SS20 and SS40 sailboat rigging shackles. This is to ensure an adequate factor of safety in lifting applications and to account for the high-cycle fatigue present in towing applications. These working load limits should never be exceeded.
Our Part # TYL-TY2020L-C | Tylaska Part # TY2020L-C
Tylaska Snap Shackle - Clevis Bail - T40C - Pin Dia: 3/4 in (TY1040-CR)
Tylaska T40 Snap Shackles are designed for massive sailboats or for towing applications. With a breaking strength of 40,000 pounds, this shackle can handle sail loads on the largest of sailboats. A lanyard can be attached to a hole in the end of the trigger allowing for remote release; an ideal configuration for towing applications. The included locking pin provides extra security from accidental release. The T40 is intended for static load applications only and is NOT approved for lifting applications.
Our Part # TYL-TY1040-CR | Tylaska Part # TY1040-CR
Tylaska Aluminum/SS Intrepid II XD End Fitting For 4 in. (102 mm) Outboard Spinnaker Pole (TY2322-XD)
The Tylaska Aluminum/SS Intrepid II XD End Fitting For 4 in. (102 mm) Outboard Spinnaker Pole #TY2322-XD is designed to provide robust performance for your sailing adventures. Made for those who need reliable and durable sailing gear, this fitting combines strength with precision engineering. It's exactly what you need to keep your spinnaker pole functioning smoothly.
Benefits
- Constructed from high-quality aluminum and stainless steel for durability.
- Compatible with 4-inch (102 mm) outboard spinnaker poles.
- Engineered for optimal performance in demanding sailing conditions.
This end fitting is crafted from a blend of aluminum and stainless steel, ensuring it withstands the rigors of marine environments. With dimensions tailored for 4-inch (102 mm) outboard spinnaker poles, it's a perfect fit for your sailing setup. Designed by Tylaska, a trusted name in sailing gear, this fitting is a technical marvel that ensures your gear operates at its best.
Our Part # TYL-TY2322-XD | Mfr. Part # TY2322-XD
Tylaska Aluminum/SS Intrepid II End Fitting For 4 in. (102 mm) Outboard Spinnaker Pole (TY2322)
Tylaska Aluminum/SS Intrepid II End Fitting For 4 in. (102 mm) Outboard Spinnaker Pole (TY2322)
Our Part # TYL-TY2322 | Tylaska Part # TY2322
Showing 376/2005
Next