Above $1000

XKA Stainless Steel Trim Tab Kit with MLC-1 Control - 12 x 9 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button.  It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm)
• Boat Length - 18' to 29' (5.5 to 8.5 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Manual Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 4"H x 5"W x 6"L WT: 17.1 lbs

XKA Stainless Steel Trim Tab Kit with MLC-1 Control - 12 x 18

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button.  It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
• Boat Length - 20' to 40' (6 to 12 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Manual Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 4"H x 5"W x 6"L WT: 27.1 lbs

XKA Aluminum Alloy Trim Tab Kit with MLC-1 Control - 12 x 18 

The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button.  It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight. 

Features:

• All Tabs sealed with a corrosive resistant epoxy coating
• Equivalent strength to 10 gauge stainless steel
• "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
• Boat Length - 20' to 40' (6 to 12 M)
• Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Manual Leveling Control
• Two (2) Aluminum Alloy tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Aluminum Alloy
• Box Dimensions: 4"H x 5"W x 6"L WT: 20.3 lbs

Power A EE21 - Electronic Control Package

Power A Mark II™ Electronics Control Systems

• Private Protocol can bus for data transmission
• Connection of multiple stations up to 4 controls
• Modular System
• Direct communication w/electronic engines (SAE J 1939 or NMEA 2000)
• Plug'N Play connectivity
• Automatic engines synchronization
• Dock Assist
• Fully programmable shift delays

EE21 Package Includes:

• 42011T - (1) PA2-B2 - Dual Lever Control w/o Trim
• 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen
• 42018H - (1) PA2-VT - V-Throttle f/0-5V Interface
• 42028L - (1) PA2-NT - Network Terminator
• 42029N - (2) T-VT2 - Universal V-Throttle Cable 6.5'
• 42060G - (1) M-S1 - Solenoid Shift Cable, 3'
• 71021K - (2) CAN-10 - Network Connection Cable 33'
• 73639T - (2) CAN-1 - Network Connection Cable 3'
• 42023A - (1) PA2-SU - Electronic Shift Unit 
• 42052H - (2) M-P1 - Power Supply Cable 6.5'
• 
  

PS4 Auto 4 Bank Battery Charger with 2 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s PS4 Auto 15A - 4-Bank Lithium/AGM Battery Charger (PN: PS4AUTO).

B.O.S. Battery Optimization System - 12V - 2-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
• Golf
• Industrial
• Aerial Equipment
• Solar Power
• Electrical Vehicles
• Communications
• Defense/Military

PS4 Auto 15A - 4-Bank Lithium/AGM Battery Charger

Latest Technology:

• Detects if a battery is Lithium or AGM
• Automatically charges both Lithium and AGM batteries for optimal performance
• Fully automatic. Completely and safely charges both Lithium and AGM batteries
• Algorithms designed and validated with battery manufacturers for a 100% charge
• The startup feature will wake up batteries that have turned off due to low-voltage protection
• Auto return to charging feature
• Quickest charge times in its class
• Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO®

Features:

• Waterproof - Use on land and in fresh and saltwater
• TROUBLE-FREE—Just Plug It In and Forget It!
• Independent outputs
• Fully automatic/multi-stage charging
• On-board diagnostic codes
• FCC 15 Parts A & B interference compliant
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)
• 3-Year Warranty

AutoProfile Intuitive Charging Technology Lithium/AGM

Professional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry.

AutoProfile Intuitive Charging Technology provides flexibility for a charging system, ready for the ever-changing lithium battery technologies. No matter if users choose Lithium or AGM batteries for the boat, Dual Pro is ready to keep a boat on the water longer, enhancing battery performance and extending battery life.

Specifications:

• Charger Input - Voltage: 120v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12/24/36/48v
• Charging Banks: 4
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 34.9 lbs

PS4 Auto 4 Bank Battery Charger with 3 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 3-Bank (PN: BOS12V3) and Dual Pro’s PS4 Auto 15A - 4-Bank Lithium/AGM Battery Charger (PN: PS4AUTO).

B.O.S. (Battery Optimization System) - 12V - 3-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
• Golf
• Industrial
• Aerial Equipment
• Solar Power
• Electrical Vehicles
• Communications
• Defense/Military

PS4 Auto 15A - 4-Bank Lithium/AGM Battery Charger

Latest Technology:

• Detects if a battery is Lithium or AGM
• Automatically charges both Lithium and AGM batteries for optimal performance
• Fully automatic. Completely and safely charges both Lithium and AGM batteries
• Algorithms designed and validated with battery manufacturers for a 100% charge
• The startup feature will wake up batteries that have turned off due to low-voltage protection
• Auto return to charging feature
• Quickest charge times in its class
• Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO®

Features:

• Waterproof - Use on land and in fresh and saltwater
• TROUBLE-FREE—Just Plug It In and Forget It!
• Independent outputs
• Fully automatic/multi-stage charging
• On-board diagnostic codes
• FCC 15 Parts A & B interference compliant
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)
• 3-Year Warranty

AutoProfile Intuitive Charging Technology Lithium/AGM

Professional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry.

AutoProfile Intuitive Charging Technology provides flexibility for a charging system, ready for the ever-changing lithium battery technologies. No matter if users choose Lithium or AGM batteries for the boat, Dual Pro is ready to keep a boat on the water longer, enhancing battery performance and extending battery life.

Specifications:

• Charger Input - Voltage: 120v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12/24/36/48v
• Charging Banks: 4
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 35 lbs

PS4 4 Bank Battery Charger with 2 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s Professional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V (PN: PS4).

B.O.S. Battery Optimization System - 12V - 2-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
• Golf
• Industrial
• Aerial Equipment
• Solar Power
• Electrical Vehicles
• Communications
• Defense/Military

Professional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V

The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water:

• The “Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE – Just Plug It In and Forget It!
• Join Over 750,000 of Dual Pro’s Satisfied Customers!
• Fully Automatic and Waterproof

Features:

• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• DeltaVolt® Intuitive Charging Technology
• Waterproof, dependable, rugged construction
• Independent outputs
• Fully automatic/multi-stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature-compensated
• Advanced microprocessor controlled
• Battery systems available: 12V – 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference-compliant
• DC charge cables = 5' AC power cord = 3'
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410

May Be Used in Many Types of Sporting Applications Including:

• Inland Watercraft
• Salt Water Watercraft
• Motorcycles
• Golf Carts
• Utility Vehicles

Specifications:

• Charger Input - Voltage: 120v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12/24/36/48v
• Charging Banks: 4
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 35.6 lbs

PS4 4 Bank Battery Charger with 3 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 3-Bank (PN: BOS12V3) and Dual Pro’s Professional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V (PN: PS4).

B.O.S. (Battery Optimization System) - 12V - 3-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
  • Golf
  • Industrial
  • Aerial Equipment
  • Solar Power
  • Electrical Vehicles
  • Communications
  • Defense/Military

Professional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V

The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best-performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water:

• The “Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE – Just Plug It In and Forget It!
• Join Over 750,000 of Dual Pro's Satisfied Customers!
• Fully Automatic and Waterproof

Features:

• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• DeltaVolt® Intuitive Charging Technology
• Waterproof, dependable, rugged construction
• Independent outputs
• Fully automatic/multi-stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature-compensated
• Advanced microprocessor controlled
• Battery systems available: 12V – 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference-compliant
• DC charge cables = 5' AC power cord = 3'
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410

May Be Used in Many Types of Sporting Applications Including:

• Inland Watercraft
  • Salt Water Watercraft
  • Motorcycles
  • Golf Carts
  • Utility Vehicles

Specifications:

• Charger Input - Voltage: 120v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12/24/36/48v
• Charging Banks: 4
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 35.7 lbs