Above $1000

DATREX Fibrelight Man Over Board (MOB) Recovery Cradle

The Fibrelight Cradle is a versatile Man Overboard (MOB) Recovery Device that fits various vessel types and sizes. Operable by a single crewmember, it serves as a boarding ladder, scramble net, and stretcher. It's lightweight, compact, cost-effective, and requires minimal maintenance with no annual servicing.

Designed for rescue craft, rigid inflatables, lifeboats, and marinas, the cradle is widely used across different vessels and industries. Its parbuckling action allows a casualty to be safely hauled aboard by securing one end of the cradle to the craft and pulling them in rung by rung.

Standard sizes are 1.3m wide and up to 15m long, with bespoke options available. Constructed with carbon fibre rods and strong tubular webbing, it withstands rigorous strength tests and is approved for durability against thermal aging, weathering, UV light, and oil resistance.

Please note: Each net must be submerged into the water by 1 to 1.5 meters (3.2 -5 feet) to be fully functional and to meet “retrieval of persons in the water” according to the new SOLAS Standards.

B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin

Garmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail.

This transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees and 6 to 10 degrees; and a 0 to 20 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Compatible Devices:

• GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv
  
• GSD™ 25 Premium Sonar Module

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Mounting Style: Thru-Hull
• Temperature: Yes
• Speed Included: No
• Imaging: Standard
• Chirp: Low/High
• Cable Length (Feet): 39'
• Pins: 12
• Box Dimensions: 7"H x 19"W x 26"L WT: 24.2 lbs
• UPC: 753759142414

ATLAS™ EDGE 6" Set Back Hydraulic Jack Plate - Classic - Silver

• HYDRAULIC RISE: 5.75”
• TOTAL RISE: 8.25” - 9.75”
• WEIGHT LIMIT: 625 lbs
• HP: 300 max

ATLAS™ EDGE Jack Plate Lifted by Power-Pole®, the next generation of the best-selling ATLAS™ line. Built for anglers who demand more from their equipment, the ATLAS™ EDGE delivers an all-new level of precision, performance, and control – with smarter features designed to make every second on the water count.

Smarter Controls, Seamless Experience

At the heart of the new ATLAS™ EDGE system is One-Touch Height Control, allowing users to instantly switch between three customizable presets for takeoff, running, and fishing / trailering. With just a single press, boaters can recall their ideal height positions, eliminate guesswork, and maximize efficiency. 

The Adjustable Speed Settings (Slow, Medium, Fast) offer tailored performance for varying water conditions and preferences, while the Auto Height Mode enables effortless operation — simply tap once to move to one of three custom saved heights; double-tap to get there at full speed.

Visibility Meets Versatility

Day or night, the ATLAS™ EDGE stays clear and easy to use thanks to Auto Display Brightness, which adjusts the screen’s visibility based on ambient light. Whether under direct sun or pre-dawn launches, the system delivers information without distraction.

Powered by Innovation

Designed in collaboration with Power-Pole®, the ATLAS™ EDGE now features a high performance brushless motor, offering quiet operation, ultra-fast lift speeds, and zero maintenance reliability.

Product advantage: Smarter. Faster. Smoother

With its innovative blend of intelligent presets and adaptive speed, the ATLAS™ EDGE sets a new standard for performance on the water. Whether you’re launching, cruising, or dialing in the perfect fishing position, it’s all just one touch away.

B75HW High Wide Tilted Element Chirp Transducer - 12 Degree Deadrise, 600W Thru Hull

Requires Mix and Match Cable for the appropriate Fishfinder it will be connected to.

Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency band for amazing target separation on baitfish and schooling gamefish, with a wide 30° beamwidth for maximum coverage under the boat. The B75H transducer delivers up to 100 kHz of total bandwidth in just one installation and delivers amazing coverage under the boat in depths to 106 meters (350').

B75HW transmits across the following bandwidth: High frequency 150 to 250 kHz

The transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings. Fixed 12° tilted version for 8° to 15° hull deadrises.

Features:

•  Depth and fast-response water-temperature sensor
• 600 W with a maximum depth performance of 106 m (350')
• High frequency: 150 to 250 kHz
• 30° beamwidth
• High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
• Low-profile, thru-hull housing provides good resolution at speed when installed properly
• Bronze housing for use on stepped, planing, or displacement hull
• Exclusive Xducer ID® technology
• 12° tilted version for 8° to 15° hull deadrises
• Hole Size: 70 mm (2-13/16")
• CHIRP-Ready Single-Band

Specifications:

• Cable Length (Feet): 30'
• Chirp: High Wide
• Imaging: Standard
• Mounting Style: Thru-Hull
• Pins: 12
• Speed Included: No
• Temperature: Yes
• Box Dimensions: 5"H x 8"W x 12"L WT: 5.8 lbs
• UPC: 801769018134

Terrova® 80 Trolling Motor with Wireless Remote - 24V - 80LB - 60"

What makes Terrova® so popular? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.

Advanced GPS Trolling System

The most-trusted navigation system in fishing. Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Terrova's wireless remote.

Spot-Lock with Jog

Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.

AutoPilot™

Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.

Push-to-Test Battery Meter

Press a button on the trolling motor head to get an instant status of how much battery life you have left.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.

Weedless Wedge™ 2 Prop

With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.

Indestructible Composite Shaft — Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.

Mobile App Compatibility

Control Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.

Electric Foot Pedal (Optional)

Low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug.

What's Included

Terrova 80 lb. 60" motor, Wireless Remote, Lanyard, Heading Sensor, MKP-33 Prop and Mounting Hardware

Specifications:

• For Use In: Freshwater
• Shaft Length: 60"
• Voltage: 24
• One-Boat Network Compatible: Yes
• QUEST Series: No
• Spot-Lock: Yes
• Built-In Sonar: None
• Foot Pedal Style: Not Included
• Control: Wireless Remote
• Auto/Stow Deploy: No
• Power Trim: No
• Power Steering: Yes
• Lift-Assist: No
• Bowguard: No
• Wireless Remote: Yes
• i-Pilot Link (GPS): No
• i-Pilot (GPS): No
• AutoPilot: No
• CoPilot: No
• Speeds: Variable
• Digital Maximizer: Yes
• Battery Meter: Yes
• Max Amp Draw: 56
• Mount Style: Bolt-On
• Mounting Location: Bow-mount
• Motor Style: Electric-steer
• Prop: Weedless Wedge 2 (MKP-33)
• Warranty: Two-year warranty

Specifications:

• Built-In Transducer: No
• Control Type: Wireless Remote
• Included Propeller: MKP-33
• Mounting Style: Bow
• Salt Water/Fresh Water: Fresh
• Series: Terrova
• Shaft Length (Inches): 60"
• Thrust (Pounds): 80 lbs
• Voltage - Input Range (Volts): 24v
• Box Dimensions: 10"H x 16"W x 74"L WT: 53.7 lbs
• UPC: 029402050598

10" Set Back Electric Jack Plate with Smart Control - White Cerakote

The IMPULSE brand represents a fundamental shift in the way we think about Jack Plates. Purposefully designed, with features for both the modern angler and the performance junkie, the IMPULSE brand is about to make some serious waves in the Jack Plate market.

IMPULSE Jack Plates are all electric which means they are cleaner, greener, and more energy-efficient than their hydraulic counterparts.  They also won't bleed down and require no messy fluids or hoses!

The IMPULSE features a modular design which creates a more open area for mounting without the need for setback spacers.

Unlock the true potential of your IMPULSE Jack Plate without out SMART Control Kit which adds an incredible set of features including a Smart Remote that doubles as a digital gauge!

• Display - The IMPLSE Smart Remote utilizes a SHARP® Memory In Pixel LCD. Embedded, 1-bit memory in every pixel allows for an always-on display that leverages ambient light to create a high-contrast, high-resolution image in all light conditions.
• MEMORY BUTTONS - The Smart Remote allows the user to program up to 3 precise memory positions that can be triggered with the push of a button.  This allows you to keep your hands off your jack plate control and back on the wheel as much as possible.
• TRAILER BUTTON - Another industry-first: a 4th programmable button installed on the frame of the jack plate, allowing you to put your jack plate at the perfect trailering height without having to climb back in the boat.

Rated for outboards up to 250HP

Z-30 Top Gun Outrigger Kit - 18'

Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing
kits make it simple to have your boat ready to fish upon receipt. If your
boat came "outrigger ready" with a Rupp outrigger mounting plate or similar
plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.

Top Gun Telescoping Poles - 18' Pair

Our 18 foot telescoping pole is comprised of three sections making it the
most rigid and durable telescoping pole on the market. Very little flex and
robust buttons make Rupp telescoping poles an obvious choice. Our
telescoping poles are an ideal match for any of our Top Gun outrigger bases.
Every part of these telescoping poles are fully serviceable, easy
replaceable and made in the USA.

O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp
outrigger bases.

Top Gun Bolt-In Z-30 Bases - Pair

An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system
offers unmatched ease of operation for top mount outriggers. Simply turning
the palm-size handle deploys and retrieves riggers smoothly and effortlessly
with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for
durability with a high strength, forged aluminum body that protects cutting
edge components. Now with anodized aluminum knob and other enhancements.
Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and
below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'.

Top Gun Rigging Kit w/Klickers

Complete rigging packages that allow you to run One (1) lines on each
rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This
rigging kit is for small outriggers, 20' and under.

Specifications:

• Construction: Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver
• Length (Feet): 18'
• Box Dimensions: 3"H x 5"W x 11"L WT: 40.65 lbs
• UPC: 784703000474

Classic Top Gun Outrigger Kit - 18'

Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing
kits make it simple to have your boat ready to fish upon receipt. If your
boat came "outrigger ready" with a Rupp outrigger mounting plate or similar
plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.

Top Gun Telescoping Poles - 18' Pair

Our 18 foot telescoping pole is comprised of three sections making it the
most rigid and durable telescoping pole on the market. Very little flex and
robust buttons make Rupp telescoping poles an obvious choice. Our
telescoping poles are an ideal match for any of our Top Gun outrigger bases.
Every part of these telescoping poles are fully serviceable, easy
replaceable and made in the USA.

O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp
outrigger bases.

Top Gun Bolt-In Radial Bases - Pair

Designed for T-Tops, half-towers and other aluminum structures, Top Guns set a new standard for convenience of operation. Easily put your riggers out
and bring them in while standing at the console.

Top Gun Rigging Kit w/Klickers

Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.

Specifications:

• Construction: Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver
• Length (Feet): 18'
• Box Dimensions: 3"H x 5"W x 11"L WT: 38.3 lbs
• UPC: 784703000498