Above $1000

DBT12 GEN2 Dock Boost Transformer

The smart isolation boosting transformer. The Dock Boost Transformer (DBT) provides precision voltage regulation to the vessel, delivering complete protection from the most common shore power problems, including brownouts, spikes, sags, and low-line or high-line voltage conditions from the dock power pedestal. The DBT also provides three levels of boost to keep your ship powered even when input voltages sag by 35%.

The DBT features a compact and lightweight footprint. By providing an industry-recognized mounting pattern, it will fit as the perfect replacement for new construction or retrofit applications (direct replacement for the Charles Iso-Boost).

The DBT12/15 accepts any input voltage ranging from 167 V-270 V (47-70 Hz) and provides a Split phase 120/240V or 115/230 V output nominal. The DBT24 accepts nominal voltages of 230, 400V, and 480V - each with the same wide range – to provide a 115/230V Split phase output.

Features:

• Drop-in replacement for the Charles Iso-boost
• 3 boosting levels utilizing a smart tap system
• Lightweight and compact at 127lbs
• Industry-recognized mounting pattern
• The wide input range of 167-270 VAC
• Parallelable for advanced applications

Freedom XC PRO Marine 3000W Inverter/Charger - 12V

A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.

The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.

Features:

• Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads
• True Sine Wave AC Power: For the operation of sensitive and motor loads
• Ignition Control: Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
• Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
• Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input
• Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power

Built-In Charger Features:

• Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
• Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
• Battery Equalization: Maximizes flooded battery life
• Dead Battery Charging Down to 0 Vdc
• Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting
• Easily configurable settings to charge any lithium-ion battery

NavNet TZtouch3 16" MFD with 1kW Dual Channel CHIRP™ Sounder & Internal GPS

Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup.

Features:

• Built-in Dual Channel 1kW TruEcho CHIRP™
• Built-in GPS Receiver
• 16” multi-touch IPS displays
• DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required)
• High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode
• Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions
• IPS LCD provides superior viewability from virtually any angle
• Compatible with NavNet TZtouch2 Networks
• Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only)
• TZ First Mate App keeps track of your catch & location 
• Synchronize data with a tablet or smartphone
• Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network
• Full Autopilot control from MFD, when connected to the NAVpilot-300/711C
• Compatible with CZone digital switching
• Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver

Specifications:

• Cartography Brand: Furuno
• Transducer Included: No
• Touchscreen: Yes
• Screen Size: 16"
• Box Dimensions: 11"H x 15"W x 21"L WT: 23 lbs
• UPC: 611679389190

B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin

Bronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.

The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.

The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.

Specifications:

• Pins: 12
• Speed Included: No
• Temperature: Yes
• Chirp: Low/High Wide
• Imaging: Standard
• Mounting Style: Thru-Hull
• Box Dimensions: 7"H x 19"W x 26"L WT: 25 lbs
• UPC: 6116793889952

Force™ Freshwater Trolling Motor - 57"

The Most Powerful and Most Efficient Trolling Motor Available.

Features:

• Includes the power you need to counter winds and currents with the efficiency to fish all day
• Wireless chartplotter integration and built-in autopilot get you to fish, along with an anchor lock to stay on them
• Wireless foot pedal provides instant control and responsiveness; feels and steers like a cable-steered pedal
• Includes integrated CHIRP traditional and Ultra High-Definition ClearVü and SideVü scanning sonars with imperceptible sonar noise interference
• A floating remote control gives you full control of the trolling motor and simple point-and-go gesture steering

Move your fishing to a higher level with force. The Force trolling motor is the most powerful and most efficient 57” freshwater trolling motor available¹. Wireless chartplotter connectivity provides navigation, autopilot, and anchor lock features. Use the precise anchor lock to hold your boat in the same location while you fish. Force includes a convenient wireless foot pedal that provides instant control and responsiveness, yet feels and steers like a cable-steered pedal. See more fish and structure clearly with integrated Ultra High-Definition scanning sonar. It also includes a handheld remote control with a built-in sunlight-readable display. The remote gives you complete control of the trolling motor and simple point-and-go gesture steering. 

Powerful, Efficient & Quiet

You get the best of all three. The powerful Force trolling motor has the power to move you from spot to spot more quickly and stand up better to winds and currents. Even with all that power, it is also the most efficient trolling motor available, so you can count on it to fish all day. And it is still whisper quiet. Its high-efficiency brushless motor operates at either 36 V or 24 V. When running at 24 V, it delivers comparable thrust to our competitors’ 36 V motors. The most powerful, most efficient, and quiet trolling motor with nearly imperceptible sonar interference - it’s everything you could want in a trolling motor.

Wireless Foot Pedal

Enjoy the convenience of a wireless foot pedal. It provides instant control and responsiveness, yet feels and steers just like a cable-steered pedal. It operates wirelessly using AA batteries, or — if you prefer — it can be hard-wired installed.

Wireless Chartplotter Integration and Built-in Autopilot

Simple integration with your Garmin chartplotter via a wireless connection makes using the built-in autopilot easy. Create routes to your favorite waypoint, and follow tracks while you fish. The built-in autopilot, with integrated heading sensor and GPS, provides anchor lock, heading hold, and cruise control. Check your settings on the unit, your chartplotter, or a sunlight-visible remote display. Just set your track, and it will guide you along your course.

Integrated Sonar

The Force trolling motor comes with an integrated transducer with CHIRP traditional and Ultra High-Definition ClearVü and SideVü scanning sonars with imperceptible sonar noise interference. The cable management system protects the built-in transducer cables as well as additional accessories, including the full range of Panoptix™ and Panoptix LiveScope™ sonars. Full sonar support is available for the GPSMAP® 8400/8600xsv and ECHOMAP™ Ultra models only. See the specs tab for more details on partial sonar support.

Convenient Remote

The included handheld remote control with a sunlight-readable, transflective display offers total control of the trolling motor along with unique point-and-go gesture steering capabilities. There are also user-programmable keys on the remote that you can use for control of your chartplotter. No need to worry if the remote takes a trip overboard, because it’s water-resistant, and it floats.

Robust and Easy to Use

The Force trolling motor is built to last. It’s rugged and durable yet easy to deploy, and it’s easy to retract and stow with dual gas springs. It’s backed with a 3-year warranty and a limited lifetime warranty on the shaft.

In The Box

• Trolling Motor
• Foot Pedal
• Remote
• High Efficiency Propeller
• Stabilizer
• Assembly and Mounting Hardware
• Documentation

¹In compliance with ISO standard 13342

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Autopilot: Yes
• Control Type: Foot Control
• Included Propeller: 010-12832-00
• Mounting Style: Bow
• Salt Water/Fresh Water: Fresh
• Series: Force
• Shaft Length (Inches): 57"
• Thrust (Pounds): 80/100 lbs
• Built-In Transducer: Yes
• Voltage - Input Range (Volts): 24v or 36v
• Box Dimensions: 12"H x 21"W x 72"L WT: 95 lbs
• UPC: 753759217662

Starlink Performance Gen 3 Kit with Wedge Mount & CommBox Edge Core Communications Gateway & Wi-Fi Router

*Monthly service plans for this item are provided by KVH, an Authorized Starlink Reseller. Starlink activation is done through KVH, service and will not work with Starlink direct unless an unlock fee is paid*

Upgrade from Starlink with “just a router” to a smart, high-performance network with KVH’s exclusive Starlink + CommBox Edge Core Performance Bundle. Enjoy powerful controls and features you simply do not get with typical routers.

Designed for resilient connectivity in remote areas and harsh environments, including extreme weather, high-vibration settings, and in-motion usage.

The Starlink Performance Wedge Mount is designed to attach to a variety of vehicles, including cars, boats, and RVs. Crafted from durable, weather-resistant materials, the mount provides a sturdy foundation for your Starlink, capable of withstanding various environmental conditions, including winds of up to 280 km/h (174 mph). The 8-degree tilt of the mount is designed to encourage water shedding, which helps maintain a strong connection during rain events.

The Performance Wedge Mount has a bolt pattern that matches the previous generation Wedge Mount, streamlining the install process when upgrading to the new Starlink Performance Kit. The mount is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

Features:

• The Starlink Performance Kit is currently capable of download speeds up to 400+ Mbps for fast, reliable connectivity whenever you need it. Starlink is focused on making network enhancements that will enable gigabit speeds starting in the most remote places on Earth with the Performance Kit. Service plan upgrades will be available in 2026. No hardware changes needed.
• Capable of enduring winds up to 270+ kph (170+ mph) and temperatures from -40°C to 60°C (-40°F to 140°F).
• Enhanced snow melting capacity, featuring an IP68 (unplugged) - IP69K (plugged) waterproof rating. Suitable for 1 meter of water submersion for up to 30 minutes and pressure washing.
• The Advanced Power Supply included with the Starlink Performance Kit is rack-mountable, operates on both AC and DC power, and supports DC input with a backup battery for uninterrupted operation. It features smart diagnostics, a high-power PoE port, and a LAN port, offering real-time monitoring, seamless connectivity, and reliable performance for demanding network and industrial applications.
• Designed for a 10-year mission life. 

Technical Specifications:

• Field-of-View (FoV) - 140°
• Orientation - Software-Assisted Manual Orienting
• Weight - 11.5 lbs (5.2 kg)
• Dimensions - 24" (L) x 15.6" (W) x 1.6" (D)
• IP Rating - IP69K (with cables installed), IP68 (no cables installed)
• Operating Temperature - -40°C to 60°C (-40°F to 140°F)
• Wind Speed - Survivable: 280 kph+ (174 mph+)
• Snow Melt Capability - Up to 85 mm/hour (3.5 in / hour)
• Power Consumption - Average: 75 - 100W
• Router Compatibility - Starlink Gen3 Router, Starlink Mini Mesh Router, 3rd Party Routers

What's In The Box?

• Starlink Performance Dish
• Advanced Power Supply
• CommBox Edge Core Communications Gateway and Wi-Fi Router
• 25m (82') Starlink Performance Cable
• 5m (16.4') Starlink Ethernet Cable
• 1.5m (4.9') Starlink AC Power Cable
• 1.5m (4.9') Starlink DC Power Cable

Starlink Performance Gen 3 Kit with Flat Mount & CommBox Edge Core Communications Gateway & Wi-Fi Router

*Monthly service plans for this item are provided by KVH, an Authorized Starlink Reseller. Starlink activation is done through KVH, service and will not work with Starlink direct unless an unlock fee is paid*

Upgrade from Starlink with “just a router” to a smart, high-performance network with KVH’s exclusive Starlink + CommBox Edge Core Performance Bundle. Enjoy powerful controls and features you simply do not get with typical routers.

Designed for resilient connectivity in remote areas and harsh environments, including extreme weather, high-vibration settings, and in-motion usage.

The Starlink Performance Flat Mount is designed to provide a sleek, low-profile installation option on a variety of vehicles, including cars, boats, and RVs. Crafted from durable, weather-resistant materials, the mount can ensure a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions, including winds up to 280 kmh (174 mph). The mount has a 2-degree tilt, which is less optimal for maintaining a strong connection if stationary during wet weather than the 8-degree tilt of the Wedge Mount.

The mount is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

Features:

• The Starlink Performance Kit is currently capable of download speeds up to 400+ Mbps for fast, reliable connectivity whenever you need it. Starlink is focused on making network enhancements that will enable gigabit speeds starting in the most remote places on Earth with the Performance Kit. Service plan upgrades will be available in 2026. No hardware changes needed.
• Capable of enduring winds up to 270+ kph (170+ mph) and temperatures from -40°C to 60°C (-40°F to 140°F).
• Enhanced snow melting capacity, featuring an IP68 (unplugged) - IP69K (plugged) waterproof rating. Suitable for 1 meter of water submersion for up to 30 minutes and pressure washing.
• The Advanced Power Supply included with the Starlink Performance Kit is rack-mountable, operates on both AC and DC power, and supports DC input with a backup battery for uninterrupted operation. It features smart diagnostics, a high-power PoE port, and a LAN port, offering real-time monitoring, seamless connectivity, and reliable performance for demanding network and industrial applications.
• Designed for a 10-year mission life.

Technical Specifications:

• Field-of-View (FoV) - 140°
• Orientation - Software-Assisted Manual Orienting
• Weight - 11.5 lbs (5.2 kg)
• Dimensions - 24" (L) x 15.6" (W) x 1.6" (D)
• IP Rating - IP69K (with cables installed), IP68 (no cables installed)
• Operating Temperature - -40°C to 60°C (-40°F to 140°F)
• Wind Speed - Survivable: 280 kph+ (174 mph+)
• Snow Melt Capability - Up to 85 mm/hour (3.5 in / hour)
• Power Consumption - Average: 75 - 100W
• Router Compatibility - Starlink Gen3 Router, Starlink Mini Mesh Router, 3rd Party Routers

What's In The Box?

• Starlink Performance Dish
• Advanced Power Supply
• CommBox Edge Core Communications Gateway and Wi-Fi Router
• 25m (82') Starlink Performance Cable
• 5m (16.4') Starlink Ethernet Cable
• 1.5m (4.9') Starlink AC Power Cable
• 1.5m (4.9') Starlink DC Power Cable

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12v

Package Includes

• Windlass
  
• On/Off Breaker Panel
  
• Reversing Solenoid
  
• Up/down Panel Switch
  
• Emergency crank / clutch release handle

• Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass
  
• Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations
  
• Fully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4" (6mm / 7mm) chain spliced to 1/2" (12 mm) three strand or 8-brait (plait) rope
  
• The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series
  
• Full disassembly capability of topworks utilising handle provided and an Allen key
  
• The RC8 Series is manufactured from marine-grade 316 stainless steel for long term durability
  
• The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance
  
• In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure
  
• The RC8 works just as effectively with all-chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck
  
• Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  
• Full disassembly capability of the topworks utilising only the handle provided and an Allen key
  
• Manual override using the emergency crank handle provided
  
• Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel

• This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode
  
• The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval
  
• As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope
  
• Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode
  
• Wave Design™ Chainwheel Is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric
  
  Specifications
  
  
  • Material: Marine-Grade 316 Stainless Steel
    
  • Power: 12 Volt DC, 600 Watts
    
  • Chain / Short Link: 1/4" ( 6mm / 7mm )
    
  • Maximum Pull: 770 lbs ( 350kg )
    
  • Rope Size: (Nylon)* (3-Strand or 8 Plait Recommended) 1/2" (12mm)
    
  • Chain Speed (Anchor Retrieval): 92 Feet per Minute (28 m / min)
    
  • Rope Speed (Anchor Retrieval): 79 Feet per Minute (24 m / min)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    Specifications:

    • Chain - Diameter (Inches): 1/4"
    • Freefall: Yes
    • Rope Diameter (Inches): 1/2"
    • Vertical/Horizontal: Vertical
    • Box Dimensions: 11"H x 17"W x 19"L WT: 31.8 lbs
    • UPC: 1000000004847