2004 products
Sort by:
2004 products
![Raritan Marine Elegance - Household Style - White - Fresh or Saltwater - Smart Toilet Control - 12v [220HS012]](http://marinexgear.com/cdn/shop/files/35881XL.jpg?v=1775851969&width=1500)
Marine Elegance™
*Sea/Fresh Combines Solenoid and Remote in 1 unit for easy switching during use*
The Marine Elegance is the ultimate in electric marine toilets. Offering the luxury of a full size seat in a one piece china bowl developed with a unique mounting system. It offers a super small footprint at just 8 ½” x 9 ¾”. All toilets are now supplied with a slow close toilet seat that includes stops to help prevent the seat from shifting while in use during heavy seas. With the same Vortex-Vac technology also offered in the Atlantes Freedom, it creates a vacuum in the bowl, eliminating the need for extra vacuum generation equipment. Unlike typical vacuum toilet systems, a convenient, built-in shredder with stainless steel blades transforms waste into small particles to reduce clogs. The efficient action of the pump quickly and quietly pulls waste from the bowl with the ability to push the waste an amazing 10' vertically and 100' horizontally. Performing at a noise level less than 63 decibels it won’t alert everyone in the boat or on the dock that nature is calling.
Benefits:
- Low water usage
- Small footprint for compact installation
- One piece vitreous china bowl
- Angled back for contoured fit
- Quiet operation
- Unmatched rinsing capabilities
- Low water consumption
- Built in shredder reduces clogs
- Can pump 10ft vertically, or 100ft horizontally
The Raritan Programmable Smart Toilet Control:
The Raritan Smart Toilet Control is a fully programmable flush control. The control allows users to flush the toilet with no water, a small amount of water or a fully timed flush. the timed flush feature can be adjusted on the panel without having to remove any components.
- Normal Flush - starts a timed flush, walk away and the toilet will run through a sequence of intake and discharge modes ensuring maximum bowl rinse, bowl re-fills to leave water in the bow
- Water Saver - starts a timed flush using half of the water of a normal flush. Bowl refills to leave water in the bowl.
- Water Only - adds additional water to the bowl without discharging any of the contents of the bowl. Allows the user to wet the bowl prior to use or fill the bowl to a certain level to minimize water usage.
- Empty Only - allows the user to evacuate the bowl while using no water. While the button is pressed the discharge pump will run, when released the pump stops.
Specifications:
- Color: White
- Gallons Per Minute: 3 GPM
- Inlet Size: 3/4"
- Operation Method: Electric
- Outlet Size: 1-1/2"
- Rinse Water: RAW
- Suction Lift (ft.): 4'
- Volts: 12v
- Type: Toilet
- Size: Household Size
- Box Dimensions: 17"H x 23"W x 23"L WT: 54 lbs
- UPC: 085462024917
Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)
Weaver C1208 Universal Swivel Dinghy Chocks (1,000 lbs Capacity)
Secure Your Tender with Elite Marine Engineering
Safely secure your rigid bottom inflatable, RIB, or hard tender to your yacht's deck or flybridge with the premium Weaver C1208 Universal Swivel Dinghy Chocks. Handcrafted right here in the USA, this heavy-duty set of 4 chocks is engineered to accommodate larger watercraft up to 1,000 lbs, offering maximum stability and protection while underway.
Why Choose Weaver Swivel Chocks?
Unlike rigid, static chocks, the Weaver C1208 features built-in swiveling stanchions. This intelligent design allows the hull-conforming pads to seamlessly pivot and self-adjust to the exact contour of your dinghy’s hull. The result is a perfect, snug fit every time, preventing localized stress points and hull scuffing.
Key Features & Specifications
-
High Load Capacity: Rated to safely support heavy tenders, high-horsepower outboards, and console RIBs up to 1,000 lbs.
-
Marine-Grade Construction: Crafted entirely from rugged, 100% marine-grade stainless steel for maximum corrosion resistance in harsh saltwater environments.
-
Hull Protection: Equipped with generous 3.5" x 7" EPDM rubber molded pads that cushion the hull without marring or scraping your gel coat.
-
Optimal Clearance: Standing 8" high, these chocks provide essential hull clearance across your deck or bridge. (Custom heights are available upon request).
-
Fast, Simple Setup: A set of 4 handcrafted chocks that are designed for easy installation, taking only minutes to align.
-
Proudly Made in the USA: Handcrafted by Weaver Industries to ensure elite quality and lifelong durability.
Crucial Buying Note: Want a clean, trip-free deck when your dinghy is deployed? Add the Weaver CREM Removable Chock Bases to your cart! Important: Because the stanchions require minor factory modifications to fit the removable bases, the CREM bases must be ordered at the same time as your chocks.
Compatibility
Because of its universal swivel engineering, the Weaver C1208 perfectly fits a vast array of hard-bottom and rigid inflatable boats (RIBs) including brands like AB Inflatables, Achilles, Highfield, Zodiac, Avon, Caribe, Novurania, TUG, and more.
📦 What’s Included in the Box?
-
(4) Handcrafted Weaver C1208 8" Swivel Chocks with Molded EPDM Pads
-
All essential mounting hardware
Invest in ultimate peace of mind. Protect your yacht deck and keep your tender securely anchored in rough seas. Order your Weaver C1208 Swivel Chocks today and experience the gold standard of American-made marine hardware!
Weaver Hoist/Leaver Integrated Hydraulic Lifting & Storage System
The Ultimate Solution for Raising Your Dinghy and Outboard Combined
Stop choosing between manual muscle strain and removing your heavy outboard engine every time you head to sea. The Weaver Hoist/Leaver System represents the pinnacle of premium tender storage engineering. Handcrafted in the USA by Weaver Industries, this elite, fully integrated mechanism uses a specialized marine hydraulic pump to let a single operator effortlessly lift, pivot, and lock a complete dinghy, outboard motor, and loaded accessories up to a vertical 90-degree position in one smooth motion.
Innovative Two-in-One Hydraulic Synergy
The true brilliance of this system lies in how the Weaver Hoist and the Weaver Leaver Bracket work together perfectly. As the hydraulic cylinder expands, it lifts from the structural pivot point of the engine bracket itself. While the tender pivots upward against your yacht's swim platform, the motor seamlessly counter-rotates on its own axis, remaining perfectly vertical, centered, and upright.
When fully raised, the heavy-duty hydraulic arm locks solid, acting as a permanent structural support that holds the full weight of your loaded tender securely above the sea.
Key Features & Specifications
-
Massive 400 lbs Total Capacity: Heavy-duty hydraulic architecture easily raises a combined load of your dinghy, outboard engine, fuel tanks, and structural gear.
-
Foot-Operated Hydraulic Pump: Features a high-efficiency foot or hand-operated deck pump. Effortlessly raise your tender with simple foot pumps, and open the integrated precision release valve to gently lower it back down under controlled gravity.
-
Eco-Safe Hydraulic Fluid: Pre-filled with an advanced, premium-grade marine hydraulic oil that is 100% safe for sensitive marine environments.
-
Ultra-Compact Fold-Down Design: Once your tender is launched and away, the entire hydraulic lifting boom folds flat back onto itself, leaving your swim platform clear and safe for foot traffic.
-
Solid Stainless Steel & Brass Structure: Built from 100% high-polished marine stainless steel and industrial brass components for legendary longevity against harsh saltwater exposure.
-
Proudly Made in the USA: Handcrafted to elite marine manufacturing standards and backed by Weaver’s Limited Lifetime Warranty.
⚠️ System Prerequisites & Installation Requirements:
-
Required Davits: This hoist system requires a Weaver Heavy-Duty Snap Davit System (such as the HD-RBD202 or HD-RS110 kits, sold separately) to provide the base hinges on your swim platform.
-
Stabilization: You must install at least one Weaver Stand-off Bracket on the bow of your inflatable to stabilize it against the yacht transom when stored vertically.
-
Custom Fabrication: Because every yacht transom, swim platform height, and dinghy hull configuration varies, the Hoist/Leaver is custom-configured to your specific dimensions.
📥 Ordering Instructions & Worksheet Requirement
To ensure perfect geometry, leverage, and clearance across your swim platform, Weaver custom-configures each hoist system.
Please choose your mounting preference (Port Side Mount or Starboard Side Mount) from the dropdown menu, download the official manufacturer worksheet below, and email your completed specifications to info@inflatableboatparts.com immediately after placing your order:
📦 What’s Included in the Box?
-
(1) Premium Stainless Steel Hydraulic Hoist Boom & Base Assembly
-
(1) Integrated Marine Hydraulic Pump (Foot/Hand operated) with Eco-Fluid
-
(1) Weaver Leaver Custom Outboard Motor Pivot Bracket
-
Heavy-Duty Marine Transom Stay Cables & Attachment Hardware
-
Industrial-Grade Under-Deck Backing Plates (to prevent fiberglass gel-coat cracking)
-
Step-by-step manufacturer installation manual
Transform your yacht’s transom with the most effortless, reliable tender recovery system on the market. Order your custom Weaver Hoist/Leaver System today and automate your cruising setup!
Weaver Marine
Weaver Davit Hoist. Swim Platform Hydraulic Davit. No Power Required. Holds up to 400 lbs.
$2,879.93
Weaver Davit Hoist. Swim Platform Hydraulic Davit. No Power Required. Holds up to 400 lbs.
The next step in the Weaver Davit system is ready. The Weaver Hoist is a hydraulic davit system operated by a foot pump. No power required.
- By pumping the cylinder with your foot you raise the dinghy on your Weaver Davits to a vertical position up to 400 pounds.
- You twist a valve to slowly lower the dinghy using the dinghy weight.
- The boom will fold back onto itself for a compact unit on the swim platform.
- You will still need to use the Weaver Stand-off brackets to hold the dinghy in the upright position.
- Weaver is using a marine grade hydraulic oil that is safe for the water environment.
- The Weaver Hoist is made from stainless steel, marine grade brass,comes with a lifetime limited warranty and is made in the USA.
- The dimensions are 12″ x 9″ at the base and the height is 29″ folded and 52″ with the boom extended.
- The weight is 70lbs.
- Can be used in conjunction with the Weaver engine leaver (see related products below).
- You decide if you want the hydraulic pump to reside on the port side swim platform or starboard side swim platform.
- Watch the demo video on YouTube:
Weaver C1207 Universal Swivel Dinghy Chocks (1,000 lbs Capacity - 6" High)
Secure Your Tender with Elite Marine Engineering
Safely secure your rigid bottom inflatable, RIB, or hard tender to your yacht's deck or flybridge with the premium Weaver C1207 Universal Swivel Dinghy Chocks. Handcrafted right here in the USA, this heavy-duty set of 4 chocks is engineered to accommodate larger watercraft up to 1,000 lbs, offering maximum stability and protection while underway.
Why Choose Weaver Swivel Chocks?
Unlike rigid, static chocks, the Weaver C1207 features built-in swiveling stanchions. This intelligent design allows the hull-conforming pads to seamlessly pivot and self-adjust to the exact contour of your dinghy’s hull. The result is a perfect, snug fit every time, preventing localized stress points and hull scuffing.
Key Features & Specifications
-
High Load Capacity: Rated to safely support heavy tenders, high-horsepower outboards, and console RIBs up to 1,000 lbs.
-
Marine-Grade Construction: Crafted entirely from rugged, 100% marine-grade stainless steel for maximum corrosion resistance in harsh saltwater environments.
-
Premium Hull Protection: Equipped with generous 3.5" x 7" molded rubber pads that cushion the hull without marring or scraping your gel coat.
-
Sleek 6" Height: Standing 6 inches high, these chocks offer a lower profile deck footprint. (Need more clearance? You can raise the height up to 4" with optional Weaver spacer bolts, or check out the 8" high C1208 model).
-
Fast, Simple Setup: A set of 4 handcrafted chocks that comes complete with all necessary installation hardware and clear instructions, taking only minutes to align.
-
Proudly Made in the USA: Handcrafted by Weaver Industries to ensure elite quality and lifelong durability.
Crucial Buying Note: Want a clean, trip-free deck when your dinghy is deployed? Add the Weaver CREM Removable Chock Bases to your cart! Important: Because the stanchions require minor factory modifications to fit the removable bases, the CREM bases must be ordered at the same time as your chocks.
Universal Compatibility
Because of its universal swivel engineering, the Weaver C1207 perfectly fits a vast array of hard-bottom and rigid inflatable boats (RIBs) including brands like AB Inflatables, Achilles, Highfield, Zodiac, Avon, Caribe, Novurania, TUG, Walker Bay, West Marine, and more.
📦 What’s Included in the Box?
-
(4) Handcrafted Weaver C1207 6" Swivel Chocks with Molded Pads
-
All essential mounting hardware
-
Complete installation instructions
Invest in ultimate peace of mind. Protect your yacht deck and keep your tender securely anchored in rough seas. Order your Weaver C1207 Swivel Chocks today and experience the gold standard of American-made marine hardware!
Weaver Universal C1007 Dinghy Chocks (1,000 lbs Capacity - Non-Swiveling)
Heavy-Duty, Reliable Deck Storage for Your Tender
Safely secure your rigid bottom inflatable, RIB, or hard tender to your yacht's deck or flybridge with the dependable Weaver Universal C1007 Dinghy Chocks. Handcrafted in the USA, this rugged set of 4 chocks is engineered to accommodate larger watercraft up to 1,000 lbs, offering maximum security and structural support while underway.
The Standard for Consistent, Solid Placement
The Weaver C1007 is a standard tilting, non-swiveling model. The stanchion pads are mounted in a fixed yoke, meaning they tilt exclusively in the up/down direction to match the angle of your hull. This robust design is ideal for boaters who place their dinghy in the exact same fore-aft position on the deck every time, providing a solid, predictable foundation that prevents shifting in rough waters.
Key Features & Specifications
-
High Load Capacity: Rated to safely support heavy tenders, high-horsepower outboards, and console RIBs up to 1,000 lbs.
-
Marine-Grade Construction: Crafted entirely from rugged, 100% marine-grade stainless steel for maximum corrosion resistance in harsh saltwater environments.
-
Large Hull Protective Pads: Equipped with generous 3.5" x 7" EPDM rubber molded pads that cushion the hull without marring or scraping your gel coat.
-
Standard 6" Profile: Standing 6 inches high, these chocks provide a stable, low-profile deck footprint.
-
Fast, Simple Setup: A set of 4 handcrafted chocks that comes complete with all necessary installation hardware, taking only minutes to align.
-
Proudly Made in the USA: Handcrafted by Weaver Industries to ensure elite quality and lifelong durability.
Crucial Buying Note: Want a clean, trip-free deck when your dinghy is deployed? Add the Weaver CREM Removable Chock Bases to your cart! Important: Because the stanchions require minor factory modifications to fit the removable bases, the CREM bases must be ordered at the same time as your chocks.
Universal Compatibility
Because of its versatile tilting engineering and large pads, the Weaver C1007 perfectly fits a vast array of hard-bottom and rigid inflatable boats (RIBs) from leading brands like AB Inflatables, Achilles, Highfield, Zodiac, Avon, Caribe, Novurania, TUG, Walker Bay, West Marine, and more.
📦 What’s Included in the Box?
-
(4) Handcrafted Weaver Universal C1007 6" Non-Swiveling Chocks with Molded EPDM Pads
-
All essential mounting hardware
Invest in ultimate peace of mind. Protect your yacht deck and keep your tender securely anchored. Order your Weaver C1007 Dinghy Chocks today and experience the gold standard of American-made marine hardware!
Weaver Front Arc Only (Replacement / Individual Bow Arc Component)
Heavy-Duty Bow Support for Transferring Extreme Tender and Motor Weight
Are you carrying a larger outboard motor or a heavier rigid-bottom inflatable (RIB)? Upgrading or replacing your existing system with the Weaver Front Arc Only is the key to securing your bow. This component is engineered to mount directly onto the interior floor of your hard-bottom dinghy, curving cleanly over the inflatable tubes to lock into your existing swim platform davit receivers.
Maximum Structural Integrity Without Gluing Pads to Your Tubes
When combined with a standard Weaver rear transom arc, the Weaver Front Arc creates an ultra-secure, 3-point structural triangle. By bolting directly into the fiberglass or composite floor of your RIB hull, it transfers the heavy lifting forces away from your inflatable tubes and shifts the stress entirely onto your yacht’s swim platform.
Best of all, the arc is completely removable. Simply pull the quick-release spring pins, and the entire overhead stainless steel frame can be stowed away, leaving your tubes clean, completely unobstructed, and comfortable for passengers when out on the water.
Key Features & Specifications
-
Heavy-Weight Load Distribution: Designed as an essential component for heavy tenders and large outboards up to 300 lbs total weight (when paired with a rear transom arc).
-
100% Solid Floor Mounting: Mounts directly to the solid fiberglass or composite deck floor of your RIB—no rubber yokes or tube-glueing required.
-
Fully Removable Design: Features quick-release release pins so you can slide the arc off in seconds for a clean look when the tender is deployed.
-
Marine-Grade Construction: Built entirely from 100% heavy-duty, marine-grade stainless steel to resist aggressive saltwater corrosion over a lifetime of use.
-
Proudly Made in the USA: Handcrafted by Weaver Industries to ensure legendary reliability and elite craftsmanship.
📝 Important Custom Ordering Instructions
Because every inflatable boat manufacturer builds their hulls with unique tube diameters and floor depths, this item is custom-built by Weaver Industries to your exact boat dimensions.To ensure a flawless fit, please complete the manufacturer worksheet linked below and email it to us at info@inflatableboatparts.com immediately after placing your order:
📦 What’s Included in the Box?
-
(1) Custom-Built Weaver Stainless Steel Front Arc Frame
-
(1) Floor Mounting Pad Unit
-
Quick-Release Push/Pull Pins
-
All essential marine-grade stainless steel deck mounting hardware
Eliminate hull flex, reduce tube stress, and safely carry the tender you want. Order your replacement or upgrade Weaver Front Arc today and keep your storage layout completely rock-solid!
Weaver Industries Fold-Down Euro-Style Helm Seat
Premium Center-Console Seating & Integrated Steering Pod for Rigid Inflatables
Upgrade your rigid bottom inflatable (RIB) or tender with the ultimate space-saving console solution: the Weaver Helm Seat. Handcrafted in the USA by Weaver Industries, this luxurious, European-style helm assembly combines a spacious two-person bench with an integrated, folding steering column. It is the perfect all-in-one choice for boaters who want to transform a standard open tender into a comfortable, steering-wheel-driven vessel without sacrificing precious deck space.
Innovative Fold-Down Engineering for Seamless Boat Storage
The standout feature of the Weaver Helm Seat is its collapsible dual-axis architecture. When it’s time to hoist your dinghy onto davits or store it on your yacht's swim platform, the entire steering column and the seat backrest fold completely flat in seconds, dropping the overall assembly height down to just 25 inches. This low-profile footprint allows your tender to clear low-clearance davit lines, garage doors, and flybridges without needing to remove any console components.
Key Features & Specifications
-
Two-Person European Styling: Features an elegant, ergonomic design with a generous 36-inch wide by 15-inch deep seat bench, providing ample room for two adults.
-
Fold-Down Steering & Backrest: Both the robust steering column pod and the seat backrest fold down flat for effortless hoisting, towing, or storage clearance.
-
Premium Marine Upholstery: Built using heavy-duty plastic seat boards covered in elite, marine-grade vinyl and high-density open-cell foam for lasting moisture and mildew resistance.
-
Integrated 12V Switch Panel: Comes pre-fitted with a Carling three-hole 12V marine switch holder, ideal for mounting controls for your running lights, bilge pump, or horn.
-
Under-Seat Storage Solution: The hinged bottom seat flips forward to reveal a spacious, heavy-duty 19" x 12.5" x 12.5" vinyl utility bag equipped with integrated storage pockets.
-
Heavy-Duty Stainless Steel Frame: The core structure is engineered from 100% polished, marine-grade stainless steel to deliver superior rust and corrosion defense in brutal offshore conditions.
-
Robust 75 lbs Overall Weight: Provides an exceptionally sturdy, low-flex foundation while remaining light enough to protect your RIB's floor integrity.
Technical & Compatibility Notes:
📦 What’s Included in the Box?
-
(1) Weaver Polished Stainless Steel Helm Seat Structure
-
(1) Complete Set of Marine-Grade White Vinyl Seat & Backrest Cushions
-
(1) Hanging Under-Seat Vinyl Storage Organizer Bag
-
(1) Built-in Carling 3-Switch Holder Pad
-
Complete Stainless Steel Floor Mounting Hardware Kit (including specialized nylon washers)
Ditch the traditional, bulky fiberglass center console block that crowds your boat. Enjoy elite, luxury-tier comfort and control while preserving your open deck layout. Order your Weaver Helm Seat today and elevate your tender experience!
This item will be shipped from the Manufacturer.
Showing 144/2004
Next