1926 products
Sort by:
1926 products
ANDERSEN 34ST E1 Electric FS Winch - 24V [RA2034011400]
Ships Direct From Manufacturer
34ST E1 Electric Full Stainless Winch - 24V
Andersen E1 Electric Winches allow you to hoist and trim sails of any size at the push of a button. They remove the requirement for physical strength, making it possible for any crew member to easily and safely control lines and sails. Perfect for enjoying sailing short-handed or with friends and family.
In addition to the host of standard features that have made Andersen self tailing winches the benchmark for quality and performance Andersen E1 Electric Winches are engineered with unsurpassed levels of functionality, monitoring and protection.
Ease of Installation
Internal contractors and controller, with no separate control box required, mean a more reliable, neater and lighter installation. Simplified electrical installation requires just the connection of positive and negative power cables to the motor terminals and the connection of the push button using the included output cable. Marine grade circuit breakers are also available for protection and isolation.
Efficient, high quality motor
At the heart of the E1 winch is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. They are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Illuminated “intelligent” Push Button
E1 winches are supplied with push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67. The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.
Unrivalled level of monitoring and protection:
- Integrated Overload Protection - The controller is pre-set to stop the winch if the Maximum Pull Load is exceeded. Operation can resume within a few seconds when the load returns below the limit
- Thermal Overload Protection – The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.
- Reverse Polarity Protection – An integrated 5 Amp fuse protects the motor against incorrect cable connection.
- Accidental Start Protection – Winch operation is disabled if the push button is already inadvertently pressed when the power supply is turned on at the circuit breaker or battery.
- Low Voltage Detection - Operation is disabled if the battery charge level is low, which prevents further drain on batteries and avoids triggering low-voltage reset of navigation instruments and other electronic devices.
- Continuous Run Time Limit– Operation is disabled if continuous run time exceeds 10 minutes.
Manual operation
2-speed manual operation is always available as a backup; to winch beyond the pre-set maximum pull load (but below the winch Max Working Load) or just for the experience.
Specifications
- Drum: 2-3/4 in. (70 mm)
- Base: 4-15/16 in. (125 mm)
- Height: 6-3/16 in. (157 mm)
- Line Entry: 2-15/16 in. (75 mm)
- Line Size: 5/16-9/16 in. (8-14 mm)
- Weight: 39.7 lbs. (18 kg)
- Max Deck Thickness: 1-15/16 in. (49 mm)
- Motor Depth: 7-3/16 in. (183 mm)
- Gear Length: 2-9/16 in. (65 mm)
- Motor Length: 11-13/16 in. (300 mm)
|
Alternator 1-2" Single Foot J10 Serpentine Pulley Regulator & Temp Sensor - 170A Kit - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.
Features:
- 1-2" Single Foot J10 Serpentine Pulley Regulator & Temp Sensor
- 170A Kit
- 12V
Specifications:
- Voltage: 12v
- Amperage: 170A
- Box Dimensions: 11"H x 11"W x 14"L WT: 16.75 lbs
- UPC: 676205500845
Brochure (pdf)
Samlex Evolution F Series 1200W, 120V Pure Sine Wave Inverter/Charger w/24V Input 40 Amp Charger w/Hard Wiring [EVO-1224F-HW]
Ships Direct From Manufacturer
Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger with 24V Input & 40 Amp Charger with Hard Wiring
Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.
Adaptive Battery Charger Option for Lead Acid Batteries
- 6 programmable charging profiles – 2, 3 and 4 stages with Equalization
- Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
- Reduces excess charging time and extends life of battery
Transfer Switch
- Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantly at zero crossing without interruption to the load.
Surge Capacity (Active Power Boost)
- The inverter has a surge capability of 3X its continuous power rating, allowing it to turn on loads with high starting surge.
- Inverter loads can exceed the continuous power output by the Power Boost Allowances without triggering and overload fault.
- There is no need to upsize to a larger inverter/charger to handle a heavy surge load, resulting in reduced costs.
Solar Input
- Connect a solar charge controller (up to 50A) directly to the EVO™ though the Battery Charger External DC Input
- External charging current is monitored to free up more power from the grid to be available to the load while charging.
- ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those who want to operate primarily on solar power, even when the grid is available (when grid is costly).
State-of-the-Art Technology
- Multiple physical points of protection monitoring are scanned up to 10,000 times per second to detect adverse internal and external conditions.
- The EVO™ is practically indestructible. The EVO™ will detect fault conditions and initiate a healthy shutdown before any damage can be done.
AC Input / Output Option
- AC Power Cord Inlet and Duplex GFCI outlet: EVO-1212F/1224F; hardwired: EVO-1212F-HW/1224F-HW
- The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data, stored on a removable 16GB SD Card. Advanced features for programming various parameters and modes of operation. 4 rows of 20 character alpha numeric LCD display for messaging.
- The EVO™ uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Applications:
- Boats, RVs, trucks, specialty vehicles
- Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
- Back-up and emergency power applications
Specifications:
- Charger Output Voltage: 18.1-34v
- Charger Output - Amps: 0-40a
- Inverter Cont. Output Wattage: 1200w
- Inverter Output Voltage: 120v
- Inverter Input Voltage: 24v
- Charger Input - Voltage: 120v
- Outlet Qty: None
- Charging Banks: 1
- Box Dimensions: 12"H x 18"W x 21"L WT: 46 lbs
- UPC: 622988078736
Taylor Made Stow n Fishermans Go Dock Box - 95" x 24" x 22" - X-Large [83560]
Taylor Made Stow n Fishermans Go Dock Box - 95" x 24" x 22" - X-Large [83560]
Ships Direct From Manufacturer
Stow 'n Fisherman's Go Dock Box - 24" x 95" x 22" - X-Large
An edition to Taylor Made's line of dock boxes comes the ideal fisherman's storage dock box. This box has all the features and benefits of our standard fiberglass dock boxes with the addition of rod holders on the underside of the lid. This added feature is a great way to keep your fishing poles stored and easily out of the way of all your other boating gear. Easily accommodates poles up to 7' long.
GROCO Paragon Junior 24v Water Pressure System - 1 Gal Tank - 7 GPM [PJR-A 24V]
Paragon Junior 24v Water Pressure System - 1 Gal Tank - 7 GPM
Water Pressure System for Yachts under 50'.
Features:
- Max 7 GPM.
- Operating pressure range 20-40 PSI.
- Intended for yachts 50ft and smaller.
- Complies with NSF-61 low-lead standard.
- Compact and powerful 2-stage rotary pump.
- Pressure gauge and 3/4" strainer included.
- Patented NOFLO;Dry-run protection.
- NOTE : Pressure storage tank is required for water pressure system application.
Specifications:
- Yacht Size: Up to 50'
- Pressure Range: 20-40 psi
- Max GPM: 7
- Pressure Storage Tank Included: 1-Gallon
- Self Priming: Yes
- Breaker DC: 20 amp
Specifications:
- Gallons Per Minute: 7 GPM
- Max PSI: 40
- Volts: 24v
- Box Dimensions: 11"H x 12"W x 22"L WT: 27.5 lbs
- UPC: 742985062603
GROCO Paragon Junior 12v Water Pressure System - 1 Gal Tank - 7 GPM [PJR-A 12V]
Paragon Junior 12v Water Pressure System - 1 Gal Tank - 7 GPM
Water Pressure System for Yachts under 50'.
Features:
- Max 7 GPM.
- Operating pressure range 20-40 PSI.
- Intended for yachts 50ft and smaller.
- Complies with NSF-61 low-lead standard.
- Compact and powerful 2-stage rotary pump.
- Pressure gauge and 3/4" strainer included.
- Patented NOFLO;Dry-run protection.
- NOTE : Pressure storage tank is required for water pressure system application.
Specifications:
- Yacht Size: Up to 50'
- Pressure Range: 20-40 psi
- Max GPM: 7
- Pressure Storage Tank Included: 1-Gallon
- Self Priming: Yes
- Breaker DC: 30 amp
Specifications:
- Gallons Per Minute: 7 GPM
- Max PSI: 40
- Volts: 12v
- Box Dimensions: 11"H x 13"W x 23"L WT: 29.2 lbs
- UPC: 742985005303
Samlex Evolution F Series 1200W, 120V Pure Sine Wave Inverter/Charger w/24V Input 40 Amp Charger [EVO-1224F]
Ships Direct From Manufacturer
Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger with 24V Input & 40 Amp Charger
Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.
Adaptive Battery Charger Option for Lead Acid Batteries
- 6 programmable charging profiles – 2, 3 and 4 stages with Equalization
- Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
- Reduces excess charging time and extends life of battery
Transfer Switch
- Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantly at zero crossing without interruption to the load.
Surge Capacity (Active Power Boost)
- The inverter has a surge capability of 3X its continuous power rating, allowing it to turn on loads with high starting surge.
- Inverter loads can exceed the continuous power output by the Power Boost Allowances without triggering and overload fault.
- There is no need to upsize to a larger inverter/charger to handle a heavy surge load, resulting in reduced costs.
Solar Input
- Connect a solar charge controller (up to 50A) directly to the EVO™ though the Battery Charger External DC Input
- External charging current is monitored to free up more power from the grid to be available to the load while charging.
- ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those who want to operate primarily on solar power, even when the grid is available (when grid is costly).
State-of-the-Art Technology
- Multiple physical points of protection monitoring are scanned up to 10,000 times per second to detect adverse internal and external conditions.
- The EVO™ is practically indestructible. The EVO™ will detect fault conditions and initiate a healthy shutdown before any damage can be done.
AC Input / Output Option
- AC Power Cord Inlet and Duplex GFCI outlet: EVO-1212F/1224F; hardwired: EVO-1212F-HW/1224F-HW
- The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data, stored on a removable 16GB SD Card. Advanced features for programming various parameters and modes of operation. 4 rows of 20 character alpha numeric LCD display for messaging.
- The EVO™ uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.
Applications:
- Boats, RVs, trucks, specialty vehicles
- Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
- Back-up and emergency power applications
- ABYC Compliant
Specifications:
- Charger Output Voltage: 18.1-34v
- Charger Output - Amps: 0-40a
- Inverter Cont. Output Wattage: 1200w
- Inverter Output Voltage: 120v
- Inverter Input Voltage: 24v
- Charger Input - Voltage: 120v
- Outlet Qty: 2 Duplex GFCI
- Charging Banks: 1
- Box Dimensions: 12"H x 19"W x 22"L WT: 46 lbs
- UPC: 622988078729
Commercial Duty Reversing Vane Pump - 24V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. Ignition protected motor, #316 stainless steel shaft, and reversing (R). SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.
Specifications:
- Self Priming: YES
- Thread NPT: 1/2" + Garden Hose Adaptor
- Control Type: Pump Mounted Reversing Switch
- Max GPM: 7
- Breaker DC: 15 Amp
Showing 1344/1926
Next