Above $1000

Raymarine Type 1 Rotary Drive - 12V [M81135]

Ships Direct From Manufacturer 

Rotary Drive Type 1 - 12V

The rotary drive is designed for power and sailboat systems that can be driven from the helm position through a chain and sprocket (e.g. cable and rod steering system). The outstanding design of the Raymarine rotary drive unit provides smooth, powerful autopilot controlled steering with quiet operation.

Optional drive sprockets and modification to the steering chain may be required.

Features:

• Rotary Drive
• Type 1
• 12V

Specifications:

• Maximum Boat Displacement: 11,000 kg
• Peak Output Torque: 20 nm
• Maximum Shaft Speed: 33 rpm
• Recommended Hard-Over Time (no load): 10 seconds
• Power Consumption: 24-48w
• Corepack Used: ACU-200

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 6"H x 11"W x 14"L WT: 11.3 lbs
• UPC: 023193811352

Airmar R599 Low/Med Frequency In-Hull Chirp Transducer Bare Wire [R599C-LM]

Ships Direct From Manufacturer

R599 Low/Med Frequency In-Hull Chirp Transducer - Bare Wire

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 102 kHz of total bandwidth in just one installation, saving customers time and money.

As the ELITE model in the Chirp In-Hull product line, the R599LM Chirps across the following bandwidths: LM Model - Low Frequency 28-60 kHz/Medium Frequency 80-130 kHz.

Features:

• Depth Only
• Chirp Technology
• L/M Frequency
• 2-3 kW
• High-Performance
• Epoxy
• 25 internal ceramics
• Exclusive Xducer ID® technology

Specifications:

• Hull Deadrise: 0° to 22°
• Acoustic Window: Epoxy/urethane
• All mounting hardware provided, including tank
• Weight: 19.7 kg (43.4 lb)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Chirp: Low/Medium
• Box Dimensions: 14"H x 17"W x 28"L WT: 58 lbs
• UPC: 801769001617

Paragon Junior 24v Water Pressure System - 2 Gal Tank - 7 GPM 

Water Pressure System for Yachts under 50'.

Features:

• Max 7 GPM.
• Operating pressure range 20-40 PSI.
• Intended for yachts 50ft and smaller.
• Complies with NSF-61 low-lead standard.
• Compact and powerful 2-stage rotary pump.
• Pressure gauge and 3/4" strainer included.
• Patented NOFLO;Dry-run protection.
• NOTE : Pressure storage tank is required for water pressure system application.

Specifications:

• Yacht Size: Up to 50'
• Pressure Range: 20-40 psi
• Max GPM: 7
• Pressure Storage Tank Included: 2-Gallon
• Self Priming: Yes
• Breaker DC: 20 amp

Specifications:

• Gallons Per Minute: 7 GPM
• Max PSI: 40
• Volts: 24v
• UPC: 742985135062

Paragon Senior Water Pressure System - 115VAC 

Water Pressure System for Yachts over 50'.

Features:

• Max 11 GPM.
• Operating pressure range 30-50 PSI.
• Intended for yachts over 50ft in length.
• Complies with NSF-61 low-lead standard.
• Powerful 2-stage rotary pump.
• Pressure gauge and 1" strainer included.
• Patented NOFLO Dry-run protection.
• Order PST-2, 3, 4 or 5 tank separately.

Specifications:

• Yacht Size: Over 50'
• Pressure Range: 30-50 psi
• Max GPM: 11
• Pressure Storage Tank Included: Order Separately
• Self Priming: Yes
• Breaker DC: 10 amp

Specifications:

• Max PSI: 50
• Volts: 115v
• Box Dimensions: 11"H x 13"W x 23"L WT: 40.3 lbs
• UPC: 742985062689

3" Safety Seacock w/2-1/2" Side Port 

Features:

• Two driver ports permit handle relocation.
• NPT threaded side port accepts SSCV or any NPT threaded accessory.
• Handle has square hole that accepts standard ratchet; helps access hard-to-reach valves, or ease actuation of hard-to-operate valves.
• Full flow.
• Serviceable while installed.
• C84400 bronze construction.
• Stainless steel ball and stem.
• Base has bonding attachment.
• PTFE seats and seals.

  ***Add a GROCO Bilge Strainer to pump out remote bilge locations.  

ANDERSEN 50 ST FS Self-Tailing Manual 2-Speed Winch - Full Stainless [RA2050010000]

Ships Direct From Manufacturer

50 ST FS Self-Tailing Manual 2-Speed Winch - Full Stainless

Power Rib™

ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio 
          radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Specifications:

• Drum Ø D: 3-1/2"
• Base Ø B: 7-1/16"
• Height H: 7-15/16"
• Line Entry L: 3-9/16"
• Line Size: 5/16-9/16"
• Weight: 17.2lb
• Gear ratio 1st speed: 2.8 : 1
• Gear ratio 2nd speed: 8.8 : 1
• Power ratio 1st speed: 15.7 :1
• Power ratio 2nd speed: 49.3 : 1

Quick Guide (pdf)

Uflex SilverSteer Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1 [SILVERSTEER 1TB]

Ships Direct From Manufacturer 

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1

Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.

Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.

Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

SilverSteer™ Package Kit Contains:

• UC130/1-SVS Cylinder
• UP25F-SVS Helm
• 2 Quarts of Hydraulic Oil

Quick Guide (pdf)
Brochure (pdf)

Raymarine Rotary Drive Type 2 - 12V [M81136]

Ships Direct From Manufacturer 

Rotary Drive Type 2 - 12V

The rotary drive is designed for power and sailboat systems that can be driven from the helm position through a chain and sprocket (e.g. cable and rod steering system). The outstanding design of the Raymarine rotary drive unit provides smooth, powerful autopilot controlled steering with quiet operation.

Optional drive sprockets and modification to the steering chain may be required.

Features:

• Rotary Drive
• Type 2
• 12V

Specifications:

• Maximum Boat Displacement: 20,000 kg
• Peak Output Torque: 34 nm
• Maximum Shaft Speed: 33 rpm
• Recommended Hard-Over Time (no load): 10 seconds
• Power Consumption: 60-84w
• Corepack Used: ACU-400

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 7"H x 11"W x 14"L WT: 13.5 lbs
• UPC: 023193811369