Sailing

Ronstan 40QT Orbit Winch, 2-Speed, QuickTrim, E1 24V [RA640201200]

40QT Orbit Winch, 2-Speed, QuickTrim, E1 24V

Lightweight electric aluminium winch with QuickTrim™ self-tailer and a high quality European engineered & manufactured E1 motor.

FEATURES

• Now available with an E1 Single Speed Electric Motor.
• Perfect for enjoying sailing short-handed or with friends and family, 
• Engineered with unsurpassed levels of functionality, monitoring, and protections.
• Installation is simple with no external control box required, while the illuminated “intelligent” push button aids in several safety precautions including overload protection, thermal overload protection, accidental start protection, reverse polarity protection, and more.
• At the heart of the system is a high quality, European engineered and manufactured series-wound motor, matched with the optimum gearbox for efficient pulling power and line speed.

Ronstan 45QT Orbit Winch, 2-Speed, QuickTrim [RA6452]

Ships Direct From Manufacturer

45QT Orbit Winch, 2-Speed, QuickTrim

Lightweight aluminium winch with QuickTrim™ self-tailer, 2 speeds, and Power Ribs™ for controlled line grip at all times.

Features:

• Sprung self-tailing jaws to accept 8-14mm line.
• QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment.
• Ball bearings carry the thrust loads, roller bearings carry the radial loads of the drum to minimise rotational friction.
• Proven gearing configuration.
• Power Rib™ ensures a controlled grip on the line at all times, whether trimming or easing. Minimal rope wear compared to more abrasive drum surface finishes.
• 45QT and 50QT available as three-speed models.
• Machined aluminium drum – stronger and lighter than traditional cast aluminium drums.
• Lightweight aluminium centre stem provides significant weight savings over traditional bronze stems.
• Low line entry due to gearing configuration geometry.

Specifications:

• Weight (lb): 11.91
• Max Pull (lb): 2980
• Gear ratio 1st speed: 3.0:1
• Gear ratio 2nd speed: 10.0:1
• Power ratio 1st speed: 13.4:1
• Power ratio 2nd speed: 45.5:1

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Barton Traveller System - Size 1 [20900]

Traveller System - Size 1

Pre-packaged mainsheet systems with all components required in one complete kit - sliding bolt track, traveller, end fittings, plastic end caps, pilot track, and full fitting instructions.

Travellers, end fittings, and track are manufactured from high-quality marine-grade aluminium with our unique grey anodised finish for added protection. 

Sliding bolt track allows for a smooth, clean profile and also makes retro-fitting easier as bolts can slide along the extrusion to match existing fastening holes.

Features:

• Three sizes - for yachts up to 14m LOA (36ft)
• 2:1 purchase system
• Recirculating precision-ground Delrin ball system

Guide to the choice of size:

• Size 1 for yachts up to 8.5m (28.5ft)
• Size 2 for yachts up to 11.0m (36ft)
• Size 3 for yachts up to 14.0m (45ft)

Barton Boomstrut - Silver/White f/Boats 30-40' [44040]

Boomstrut 44040 is designed for boats 10.5m – 12m (30ft – 40ft) in length with a maximum boom tip weight of 23kg (51 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when either the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars.

Six sizes to suit yachts up to 12m/40ft LOA

Patented flexing spring provides fast response and a constant force for vang efficiency

The boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.

Maintenance-free, durable design

Eliminates friction and sliding parts.

Improved performance

Less weight and windage.

Easy installation

There’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.

Simple to follow instructions

The Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.

Mast fitting can use existing luff groove

To eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.

Contoured boom fitting

The Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.

Carefully designed & constructed

The Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.

All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

Barton Boomstrut - Black f/Boats 30-40' [44041]

Boomstrut - Black for Boats 30-40'

Boomstrut 44041 is designed for boats 10.5m – 12m (30ft – 40ft) in length with a maximum boom tip weight of 23kg (51 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom and mast fittings. The uplift created means that the boom will not fall onto the boat when either the sail is lowered, or the topping lift is released or removed. Suitable to be used with wooden, carbon fibre or aluminium spars..

Six sizes to suit yachts up to 12m/40ft LOA

Patented flexing spring provides fast response and a constant force for vang efficiency

The boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.

Maintenance-free, durable design

Eliminates friction and sliding parts.

Improved performance

Less weight and windage.

Easy installation

There’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.

Simple to follow instructions

The Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.

Mast fitting can use existing luff groove

To eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.

Contoured boom fitting

The Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.

Carefully designed & constructed

The Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.

All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

Facnor FAST 4500 Top-Down Swivel [43230004540]

FAST 4500 Top-Down Swivel

The Fast 4500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 4500 (19mm inner jaw width) Gennaker/Code sail furler with the Fast 4500 top-down swivel so an asymmetric spinnaker can be used.

Features:

• Provides easy furling
• Top-down furling, i.e. from top to bottom (free luff)
• Free rotating tack fitting
• No maintenance (the mechanism is highly protected)                            
• Same features as FX+ mechanisms (tested, strong, and quick-release attachments)

Specifications:

• Weight: 0.66 kg

Facnor FX+0900 Flying Sail Furler [43410700945]

Ships Direct From Manufacturer

FX+0900 Flying Sail Furler

Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing.

Features:

• Adapted to sailboat from 6 to 10.5m (20 to 30 ft.)
• Code sail surface of 30m²/ 322ft² maximum
• Captive quick-release pin
• Possible conversion for asymmetric Spinnaker
• Composite/carbon housing
• Maintenance-free units (sealed bearings)

The Standard Kit of the FX+900 Furler Includes:

• One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum
• One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking
• One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative)
• One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative)

Offers Comfort in Sail Handling, Reliability, and Easy Manipulation:

• Monoblock's conception of the mechanisms for more sturdiness and long-lasting
• Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin
• Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling
• Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end 
• Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble

Specifications:

• Weight: 0.57 kg
• Sailboat Length (feet): 20'-30'
• Code Sail Area (m²): 30,00
• Code Sail Area (ft²): 322,00
• Staysail Area (m²): Not adapted to furl a staysail
• Staysail Area (ft²): Not adapted to furl a staysail
• Safe Working Load (tons): 0,90
• Standard Top Swivel Attachment: Shackle
• Standard Bottom Drum Attachment: Snapshackle
• Ratchet Option: NOT available
• Continuous Line Drum Ø: 85,00mm
• Spliced Furling Line Ø: 6,00mm
• Warranty: 3 years

*Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 900 top-down thimble.

Facnor FAST 1500 Top-Down Swivel [43230001540]

FAST 1500 Top-Down Swivel

The Fast 1500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 900/1500 (15mm inner jaw width) Gennaker/Code sail furler with the Fast 1500 top-down swivel so an asymmetric spinnaker can be used.

Features:

• Provides easy furling
• Top-down furling, i.e. from top to bottom (free luff)
• Free rotating tack fitting
• No maintenance (the mechanism is highly protected)                            
• Same features as FX+ mechanisms (tested, strong, and quick-release attachments)

Specifications:

• Weight: 0.24 kg