27 products
Sort by:
27 products
DATREX 20″ Life Ring White USCG Type IV Approved DX0200WD
On recreational vessels the law requires that a Type IV flotation device be readily available. his application is precisely where the new 20” Datrex life rings will easily become the best and most cost-effective method to assist a person in distress.
20″ White Lifering buoy without retro reflective tape for installations such as on lifeguard stations at beaches or pools, docks, board walks, buildings that are next to water and yachts not required to comply with SOLAS.
All Datrex rings are molded from high impact linear low-density polyethylene for superior life expectancy in the most severe environments.
Commercial vessels, from the CFR 46, A vessel of not more than 7.9 meters (26 feet) in length must carry a minimum of one life buoy of not less than 510 millimeters (20 inches) in diameter.
DATREX 24″ Lifering White USCG, No Tape
24″ White lifering buoy without retro-reflective tape for installation on yachts and other boats that are not required to carry the 30″ buoys.
All Datrex rings are molded from high impact linear low-density polyethylene for superior life expectancy in the most severe environments. The encircling rope is replaceable.
USCG Approved. Recognized and accepted byTC (Transport Canada)
DATREX 30″ Life Ring White USCG, No Tape
Life ring buoy 30″, 2.5 kg white buoy without retro reflective tape for installations such as on lifeguard stations at beaches or pools, docks, board walks, buildings that are next to water and yachts not required to comply with SOLAS.
All Datrex rings are molded from high impact linear low-density polyethylene for superior life expectancy in the most severe environments. U.S. Coast Guard approvals.
DATREX 30″ Lifering Orange 2.5 KG USCG APPROVED
Liferingbuoy 30″, 2.5 kg orange buoy without retro reflective tape For installations and yachts not required to comply with SOLAS . All Datrex rings are molded from high impact linear low-density polyethylene for superior life expectancy in the most severe environments. The becket/grab lines are replaceable.
All Datrex rings are molded from high impact linear low-density polyethylene for superior life expectancy in the most severe environments. The encircling black, floating rope is replaceable.
Drop tested up to 50 meters.
DATREX 20″ Life Ring Orange USCG Type IV Approved without Reflective Tape
On recreational vessels the law requires that a Type IV flotation device be readily available. his application is precisely where the new 20” Datrex life rings will easily become the best and most cost-effective method to assist a person in distress.
20″ Orange Lifering buoy without retro reflective tape for installations such as on lifeguard stations at beaches or pools, docks, board walks, buildings that are next to water and yachts not required to comply with SOLAS*.
All Datrex rings are molded from high impact linear low-density polyethylene for superior life expectancy in the most severe environments.
Commercial vessels, from the CFR 46, A vessel of not more than 7.9 meters (26 feet) in length must carry a minimum of one life buoy of not less than 510 millimeters (20 inches) in diameter.
DATREX HAMMAR Quick Release System Complete Remote Release
HAMMAR Lifebuoy Quick Release System (HLQRS), HA0600H
The Hammar HLQRS is a well-designed system that ensures both quick release of Bridgebuoy in a MOB situation as well as if the vessel itself is sinking.
Features:
- Safe and quick operation to save lives
- Electric activation from the bridge
- One complete package
- Easy and quick installation onboard
- Economical solution
A complete system for one side consists of:
- HA0500H: GRP holder with mounting brackets that can be fitted on either port or starboard side, size 1000X1000X130 mm.
- HA0510H: ERRS package which includes one release switch, one connector box, one ERU, 15 meters of cable and a manual. The release switch is operated on DC24V emergency power.
- HA0520H: Holder package which includes metal holder, spring, manual safety pin, reinforcement washer, cable tie and manual
- DX0340D: Datrex Bridgebuoy 4.0 kg.
Spare parts:
- HA0406H ERU electric / water activation, to be replaced every two years.
- HA0630H Hydrostatic Replacement kit, to be replaced every two years. Pictured in images.
DATREX Fibrelight Man Over Board (MOB) Recovery Cradle
The Fibrelight Cradle is a versatile Man Overboard (MOB) Recovery Device that fits various vessel types and sizes. Operable by a single crewmember, it serves as a boarding ladder, scramble net, and stretcher. It's lightweight, compact, cost-effective, and requires minimal maintenance with no annual servicing.
Designed for rescue craft, rigid inflatables, lifeboats, and marinas, the cradle is widely used across different vessels and industries. Its parbuckling action allows a casualty to be safely hauled aboard by securing one end of the cradle to the craft and pulling them in rung by rung.
Standard sizes are 1.3m wide and up to 15m long, with bespoke options available. Constructed with carbon fibre rods and strong tubular webbing, it withstands rigorous strength tests and is approved for durability against thermal aging, weathering, UV light, and oil resistance.
Please note: Each net must be submerged into the water by 1 to 1.5 meters (3.2 -5 feet) to be fully functional and to meet “retrieval of persons in the water” according to the new SOLAS Standards.
Premium Plus Single Mercury Engine Keyless Ignition with Keyless Stop/Start, Remote Stop/Start, Ecos Rem Trim/Tilt
CoastKey Premium Plus for Mercury is a full-fledged wireless system with remote-controlled Start/Stop and remote-controlled Trim/Tilt in addition to a wireless lanyard function. In addition to the control box, cables, and Start Panel (which is mounted at the steering position), the system is equipped with a 5-button wireless remote-control FOB. In addition to the benefits of using the Start Panel (described under BASIC below), the FOB can be used to switch on the ignition and start and stop the engine wirelessly. When you have the FOB with you, it is not necessary to enter the PIN code to unlock the panel (although you can always start the engine that way).
By wearing the FOB at all times, the boat operator is secured with one of the market’s best wireless lanyard systems, which ensures that the boat stops if you fall overboard.
With Premium Plus, you also have the option to remotely control two extra functions, for example, Trim-Tilt and Windlass. Handy when you get to the boat and can stand on the jetty and tilt down the engine, and start it before getting on board and casting off. This is also useful when launching with a boat trailer.
Features:
- Keyless Start
- Start Panel
- Engine Box
- Plug & Play Cable
- Wireless Lanyard
- Wireless Start/Stop
- Wireless Function Aux 1
- Wireless Function Aux 2
CoastKey is installed instead of, or in parallel with the existing ignition key and you can still use the existing lanyard cord.
CoastKey Basic is the basic version of CoastKey. In addition to the control box and cables, it consists of a Start Panel which is mounted at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key.
If you have a newer Mercury brand engine, installation is incredibly easy. The CoastKey Start Panel fits right into the same hole as the ignition switch and the connectors on the included cable fit right into the existing wiring harness. Truly PLUG & PLAY.
Owner's Manual (pdf)
Brochure (pdf)
Showing 16/27
Next