Marine Navigation & Instruments

Furuno CA200B-8B/30 2kW Rubber Coated Transducer - 200kHz [CA200B-8B/30]

520T-BLD Bronze Thru-Hull Low Profile 600W - 10-Pin

Airmar B117 Housing Style Transducer

Features:

• 600 Watts
  
• 50/200 kHz
• 45/15 degree Beam Angles
• Low Profile Bronze Thru-Hull with Temperature
• 30 Foot Cable with 10-Pin Connector

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Speed Included: No
• Pins: 10
• Mounting Style: Thru-Hull
• Imaging: Standard
• Chirp: No
• Cable Length (Feet): 30'
• Temperature: Yes
• Box Dimensions: 8"H x 17"W x 17"L WT: 16.5 lbs
• UPC: 611679311986

Airmar H2183-10 Solid State Compass w/Heading Sensor [H2183-10]

H2183-10 Solid State Compass with Heading Sensor

The Advantage is the Accuracy 

Whether you are offshore fishing or just enjoying family time on the water, feel confident and comfortable that the H2183 is your reliable source for heading information. The solid-state three-axis compass, combined with Airmar’s additional advanced sensors and software provide unparalleled performance. What sets the H2183 apart from the competition is its ability to maintain 2° of heading accuracy under dynamic motion conditions, such as steep heeling, hard turns, and rough seas. Heading integrated with the three-axis rate gyro and three-axis accelerometer data allows the H2183 to maintain 2° of accuracy even if the vessel is pitching and rolling up to 30°. This level of accuracy is perfect for interfacing with autopilots, chart plotters, and radar systems. 

The H2183’s innovative circular design easily mounts and aligns on ANY angled bulkhead. Designed for simultaneous use with NMEA 0183 and NMEA 2000® devices, the waterproof, easy-to-install sensor can be wired into both NMEA 0183 and NMEA 2000 networks on the vessel with just a single cable.

Features: 

• Better than 1° heading accuracy in static conditions 
• Best-in-class 2° heading accuracy in dynamic conditions 
• Three-axis solid-state compass provides heading data 
• Three-axis accelerometer provides pitch and roll data 
• Three-axis rate gyro provides rate-of-turn data 
• Only recreational heading sensor that uses a three-axis rate gyro 
• Compass calibration can be easily done on any display or PC 
• Easily mounts on any angled bulkhead 
• IPX6 waterproof enclosure 
• Default 10 Hz update rate for heading (HDG) 
• Outputs NMEA 0183 and NMEA 2000 data simultaneously

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Quick Guide (pdf)
Brochure (pdf)

M285HW Chirp In-Hull 1kw Transducer

Requires Mix and Match Cable

The M285HW, is a 1kW, economical Chirp transducer designed for offshore fishing and freshwater anglers. Operating at the high frequency range of 150-250kHz and a fixed wide beam of 25 degrees, these transducers reveal ultra-clear target resolution in shallow,murky waters at shallow to medium depths(up to 700 feet*).

The transducer includes a plastic housing which is secured inside the hull of the boat and is filled with Eco-friendly anti-freeze. The transducer is inserted into the housing and adjusted for the proper dead rise offset,insuring the beam is shooting straight down. The liquid provides the best medium to transmit through the fiberglass and into the surrounding water. The benefits to the in-hull transducer are that there are no protruding features on the exterior of the hull making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 25’ with solid core,fiberglass hulls.

Features:

• Depth only
• Chirp Ready High frequency (150-250kHz) for great offshore and inshore performance
• 25 degree fixed beamwidth
• 1 kW output
• Depth range: to 700’ (215 meters)
• Perfect for trailered or lifted boats
• Urethane Housing- liquid filled
• Exclusive Xducer ID®

Specifications:

• Weight: 9.17 lb (4.16 kg)
• Hull Deadrise: Adjustable 2° to 20°
• Acoustic Window: Urethane
• For use on solid fiberglass hulls only

Specifications:

• Mounting Style: In-Hull
• Box Dimensions: 5"H x 8"W x 12"L WT: 4.75 lbs
• UPC: 801769002126

R111-LH Chirp In-Hull Transducer - Bare Wire

Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money.

A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths:

L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz

Features

• Depth & fast-response water-temperature sensor
• Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth
• High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth
• 117 kHz of total bandwidth from one transducer
• Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth
• Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking)
• Urethane transducer housing
• Hull Type: Solid fiberglass only
• Exclusive Xducer ID® technology
• Hull Deadrise: 0° to 22°
• Acoustic Window: Epoxy/urethane
• All mounting hardware provided, including tank
• Weight: 19.7 kg (43.4 lb)

Specifications:

• Temperature: Yes
• Speed Included: No
• Pins: Bare Wires
• Mounting Style: In-Hull
• Chirp: Low/High
• Cable Length (Feet): 33'
• Imaging: Standard
• Box Dimensions: 13"H x 17"W x 27"L WT: 56 lbs

Garmin Carbon Fiber Mast Bracket - 4 Units [010-12236-02]

Carbon Fiber Mast Bracket - 4 Units

Mount 4 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Type: Mounting Brackets
• Box Dimensions: 11"H x 14"W x 22"L WT: 8.6 lbs
• UPC: 753759138226

Furuno 15M Signal Cable f/1623 [001-122-870-10]

15M Signal Cable for 1623

15 Meter Signal Cable specifically for Furuno's 1623

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Airmar B175H Bronze Thru Hull 0 Tilt - 1kW - Requires Mix and Match Cable [B175C-0-H-MM]

Ships Direct From Manufacturer

B175H Bronze Thru Hull 0° Tilt - 1kW

Requires Mix and Match Cable

B175H Bronze Thru Hull 20 degree Tilt 1KWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

• High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth
• 0° tilted version, 1KW
• 80 kHz of total bandwidth from one transducer
• Depth & fast-response water-temperature sensor
• Bronze transducer housing
• Boat Size: Up to 11 m (36’)
• Hull Type: Fiberglass or wood
• Exclusive Xducer ID® technology
• Requires Mix and Match Cable

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Mounting Style: Thru-Hull
• Chirp: High
• Box Dimensions: 8"H x 11"W x 12"L WT: 11.1 lbs
• UPC: 801769001907

Garmin Carbon Fiber Mast Bracket - 2 Units [010-12236-00]

Carbon Fiber Mast Bracket - 2 Units

Mount 2 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Type: Mounting Brackets
• Box Dimensions: 12"H x 13"W x 15"L WT: 6.05 lbs
• UPC: 753759127091