Marine Navigation & Instruments

VMH 70 7" Sunlight Readable IPS TFT Touchscreen Display

The best-in-class VMH 70 display is designed to manage large amounts of complex data, and thanks to its real-time operating system it ensures full control of vital engine information immediately after power up.

Easily configured to display information from up to four engines when connected to NMEA2000 or two engines via J1939 or analog inputs simultaneously, it has a large possible setting. This allows users to group similar items such as single or dual engines, battery performance, fuel, water, waste, tank level, rudder and trim, onboard systems, navigation, and weather if desired.

The device has an integrated light sensor that adjusts for easy reading without eye strain, no matter how bright or dark the conditions and two camera inputs allow one to control the engine compartment during navigation and keep an eye on the main deck while maneuvering.

The embedded NMEA 2000 gateway brings all the sensor readings and alarms to your external multi-functional display, saving the cost of an additional converter.

Features:

• Veratron VMH premium instruments series
• 7" sun-readable IPS TFT touchscreen display
• Slim panel installation profile
• Mineral glass front lens
• Reliably operating in high-temperature environments
• IPX7 protection rating (exposed device)
• NMEA 2000 certified
• Fully configurable analog inputs for direct sensor connections with NMEA 2000 gateway
• Customizable startup screen
• Dual SAE J1939 CAN ports
• Easily customizable GUI screens

Technical Specifications:

• Nominal Voltage - 12/24v
• Operating Voltage - 9-32v
• Housing - Aluminum case, mineral glass front lens
• Mounting - Front panel mount via mounting kit
• Connectors - 2x Molex MX-150, 12 pins, 1x DeviceNet M12, 5 pins (NMEA 2000), 2x TE SuperSeal 1.5, 3 pins (EasyLink), 1x M12, 4 pins (Video)
• Compliance - CE, UKCA, Reach, RoHS

In the Box:

• VMH 70 Display
• Sun Cover
• Panel mounting kit
• Engine 1 power and data cable
• Engine 2 data cable
• EasyLink extension cable

*Sold as an Individual

Specifications:

• Box Set: No
• Gauge Size: 7"
• Gauge Type: Multifunction
• Series: VMH
• Voltage - Input Range (Volts): 12/24v
• Box Dimensions: 4"H x 8"W x 12"L WT: 3 lbs
• UPC: 7640190290084

Airmar B744VL 200/50kHz Bronze Long Stem Thru-hull Transducer (8-pin)
010-10193-22

Our bronze, thru-hull mount long stem transducer provides depth, speed and temperature data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-28° deadrise angle.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Temperature: Yes
• Speed Included: Yes
• Pins: 8
• Mounting Style: Thru-Hull
• Imaging: Standard
• Chirp: No
• Cable Length (Feet): 39'
• Box Dimensions: 3"H x 12"W x 16"L WT: 8.9 lbs
• UPC: 753759971793

Garmin GT15M-THF 0 Degree 600W SS Thru-Hull Transducer [010-02868-00]

GT15M-THF 0 Degree 600W SS Thru-Hull Transducer

Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.

Midband Chirp Traditional Sonar

This 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,200’ in saltwater and 1,900’ in freshwater.

Broad Frequency Range

Use the perfect frequency for the waters being fished. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.

Optimum Ping Sensitivity

Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on a compatible chartplotter display.

Thru-Hull Installation

A durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.

Auto-ID Technology

Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to configure itself to the transducer being used automatically.

Fits Various Hull Types

Configurable for various boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20 degrees without a fairing block.

Specifications:

• Transducer Frequency: Medium band chirp (85-165 Khz)
• Transducer Power: 600 W
• Transducer Beam Width: 24-16 degrees
• Transducer Maximum Depth: 1200 Ft Saltwater; 1900 Ft Freshwater
• Transducer Cable Length: 50 ft.
• Transducer Depth/Speed/Temperature: Depth, temperature
• Transducer Number of Pins: 8-Pin
• Transducer Supported Deadrise/Transom Angles: 0 degrees support hull deadrise angles from 0 degrees to 7 degrees
• Housing Material: Stainless steel

In the Box:

• GT15M-THF transducer
• Jam nut
• Washer
• Thread isolator
• Hull isolator
• Documentation

Specifications:

• Cable Length (Feet): 50'
• Mounting Style: Thru-Hull
• Temperature: Yes
• Box Dimensions: 7"H x 8"W x 11"L WT: 7 lbs
• UPC: 753759319922

Furuno Wind Transducer w/30M Cable [FI5001/30M]

Wind Transducer with 30M Cable

Elegant, Accurate & Affordable

The FI5001 is an analog Wind Transducer for use with the FI50 and FI70 series of instrument displays. It is capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.

Important Note: The FI5001 Sensor does not come with a cable as standard, while the FI5001/30M comes with a 30 meter cable. Available 30 meter and 50 meter cable kits include a junction box.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Nitron XD Pro Full Color Marine Night Vision Camera - Undermount - Analog - Black

Experience unmatched clarity on the water with the Nitron XD Pro — the ultimate marine night vision camera. Engineered for maximum performance, it delivers true HD resolution and crystal-clear imagery even in complete darkness. Unlike thermal systems, it captures a realistic, full-color image — so you’ll always have a clear view of the horizon, channel markers, and other vessels, no matter the lighting conditions.

Installation is effortless. The Nitron XD Pro seamlessly integrates with Garmin, Simrad, Raymarine, and many other major MFDs. Using the included cable, simply plug into your display’s video input port for a quick, plug-and-play connection - no complex setup required.

Plug and Play

Choose from analog, HDMI, or Power Over Ethernet (POE) output to easily connect directly to your Garmin, Simrad, or other major MFDs. Includes brand-specific video input cables for seamless integration.

See What's Out There

See markers, buoys, docks, and more with confidence. The camera captures clear visuals in zero-light conditions—no thermal imaging required.

Built to Last

IP69 rated and built with military-grade materials. It resists salt spray, corrosion, UV, and moisture—perfect for long-term marine use.

Full Color HD

The Nitron XD Pro delivers up to 4K HD full-color video—so you can now see everything at night in vivid detail. Experience enhanced clarity, color accuracy, and next-level night navigation.

Superior Non-Thermal Night Vision

The Nitron XD Pro is a non-thermal night vision camera, meaning it doesn't rely on detecting heat signatures like thermal imaging systems. Instead, it utilizes advanced low-light imaging technology to amplify available ambient light, delivering high-resolution, full-color visuals even in near-total darkness. This approach offers several benefits:

• Enhanced Detail Recognition: Unlike thermal cameras that produce monochromatic images based on heat differences, non-thermal systems like the Nitron XD Pro provide detailed, true-to-life visuals. This clarity is crucial for identifying specific objects, reading signage, or recognizing subtle obstacles during nighttime navigation.
• Color Imaging: The Nitron XD Pro delivers full-color images, offering a more natural and intuitive viewing experience compared to the grayscale or false-color outputs typical of thermal cameras.
• Unaffected by Heat Sources: Thermal cameras can struggle in environments with uniform temperatures or when distinguishing between objects of similar heat levels. The Nitron XD Pro's performance remains consistent regardless of ambient temperature variations.

Features:

• Ultra-Sensitive Sensor – Detects light levels as low as 0.0000025 lux for true night vision clarity.
• 4K Resolution – Captures every detail in stunning ultra-high definition.
• 60 Frames Per Second – Delivers smooth, real-time video with zero lag.
• Direct MFD Connection – Compatible with Garmin, Simrad, Raymarine, and more via Analog, HDMI, or POE.
• Marine-Grade IP69K Housing – Fully sealed and built to withstand salt, spray, and the harshest marine environments.
• Flexible Mounting Options – Install on top or bottom surfaces for optimal visibility.
• 12V DC Power – Simple, reliable power input for any vessel setup.
• Manual Vertical Tilt – Easily adjust the viewing angle to suit your boat or mounting position.
• 50° Field of View – Balanced perspective for wide-area visibility and depth perception.
• Auto Day/Night Filter – Seamlessly transitions for clear imaging in all lighting conditions.

What's In The Box?

• Nitron XD Pro Marine Camera – Precision-engineered for HD night vision performance
• 25' Quick-Connect Wiring Harness – Simple, plug-and-play installation
• 5 Amp Inline Fuse – Protects your system from power surges
• Anodized Aluminum Mount – Durable, corrosion-resistant construction
• Stainless Steel Screws – Marine-grade hardware for long-lasting reliability
• Dielectric Grease Packet – Single-use protection for electrical connections

MPower® 16-Channel DC Load Controller Module with NMEA 2K without Connectors

For larger breakers and more circuits, the MPower® CLMD16 is a 16-Channel DC Load Controller Module. Four of the 16 breakers handle a maximum of 25 amps, and twelve breakers handle a maximum of 12 amps, with a total current capacity of 125 Amps. Additionally, circuits can be paralleled.

The CLMD16 also supports two H-Bridge reversing polarity circuits that can be used for loads such as engine hatches, passerelles, trim tabs, etc. The CLMD16 has 8 inputs for hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc. There are 3 inputs capable of monitoring tank levels.

The CLMD16 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD16 is that it reports the current through each of the 16 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.

Features:

• NMEA 2000® Interface
• IP67 Rated
• Ignition Protected
• Opto-isolated from NMEA 2000®, eliminating potential ground loops
• Sixteen (16) dimmable Electronic Circuit Breakers (ECBs) for On/Off Control over NMEA 2000® network
• 4 breakers capable of carrying up to 25 Amps
• 12 breakers capable of carrying up to 12 Amps
• Individual breaker electrical current monitoring
• Breakers can have Power-Up states defined (ON, OFF, or previous states)
• Breakers can be locked against inadvertent actuation.
• Capacitive touch switches for local control of all loads
• All inputs and outputs are protected against short to Power and short to Ground
• Automatic ECB overcurrent shutdown
• Automatic ECB thermal shutdown (Overtemperature Protection)
• Eight (8) discrete digital input channels capable of sensing +ve or ground signals
• Two (2) resistive analog input channels
• One (1) 4-20mA current loop input channel

Applications:

• Remote control of navigation lights
• Remote control of boarding lights
• Burnt-out bulb alerts
• Control of area lights with dimming

APEX® 19 VX MSI+ Chartplotter/Fishfinder with Transom Mount Transducer

The APEX 19 VX MSI+ CHARTPLOTTER provides the clearest sonar imaging on the sharpest multi-function display that anglers have ever seen. Industry-leading MEGA Imaging+ and Dual Spectrum CHIRP sonar come standard, with even more performance from a dedicated sonar channel for accessory 2D CHIRP transducers up to 2kW. See it all clearly with an 18.5" Full-HD touchscreen that provides a customized display of information from advanced network options like NMEA 2000®, HDMI In/Out, WiFi, and Bluetooth®. Add the power of the One-Boat Network™ to integrate the accuracy of Humminbird GPS charts, unrivaled boat control from Minn Kota, and reach new depths with wireless Cannon® downrigger control.  The APEX Series is the kind of MFD that will take you fishing to a new level. 

Features:

• Full HD Display with Cross Touch® interface: APEX delivers eye-popping detail with a 1920H x 1080V display. See the incredible detail of sonar and chart images that will ensure you never miss a thing. Control it all using the touchscreen or the keypad—it's up to you.
• Customized Experience:  Utilize an intuitive user interface and sidebar menu that provide customizable settings and view combinations to make your fishing experience all your own.
• Dual Core Processor: Perform any task with speed and ease, thanks to the ultra-responsive interface and upgraded processing power.  
• Industry-leading Humminbird sonar: Equipped with MEGA Side Imaging+, MEGA Down Imaging+, and Dual Spectrum CHIRP sonar to keep you on the fish. MEGA Imaging+ provides views up to 250' under and out to either side of your boat, and Dual Spectrum CHIRP shows exceptional 2D sonar with superior target separation and fish clarity. 
• Dual Channel CHIRP Sonar: Dual sonar ports offer connection with any Humminbird sonar options, as well as a dedicated port for 2D CHIRP transducers up to 2kW. 
• Internal GPS and Humminbird Basemap: Our enhanced basemap provides you with a clear view of underwater terrain and surrounding points of interest so you can fish and navigate with total confidence. Identify buoys, day markers, hazards, marinas, contours, depth markers, and much, much more. Includes charts of more than 10,000 lakes, plus coastal coverage for the continental U.S.
• Premium Chart Compatible: Humminbird provides the most complete offering of premium chart options to anglers everywhere. Get a complete view of the world below with optional charts from Humminbird's LakeMaster® and CoastMaster™ products, as well as your choice of compatible Navionics® charts. 
• AutoChart Live: Create real-time maps of your fishing spots, with access to patented Humminbird® LakeMaster® features. Map depth contours, bottom hardness, and vegetation as you drive your boat.  Comes standard with eight (8) hours of built-in recording time and is compatible with AutoChart Zero Line SD cards for virtually endless AutoChart Live mapping capacity.
• One-Boat Network Compatible: Many Humminbird models seamlessly integrate and communicate with Minn Kota and Cannon products to unlock more features and capabilities for anglers everywhere. Make more of your time on the water with the exclusive boat control and fish-catching features of the One-Boat Network. 
• Dual Ethernet Ports: Build a powerful, professional-grade fishing system with dual Ethernet ports on APEX chartplotters. Easily network products without the need for an external network hub, allowing the connection of multiple control heads and Ethernet accessories like Minn Kota i-Pilot Link and Humminbird CHIRP Radar.
• HDMI Compatible: See it all with independent HDMI In and HDMI Out ports on APEX. Connect and view accessory camera and video sources, as well as output to accessory displays for more viewing and rigging options. 
• Bluetooth: Take control right from the screen of your Humminbird with wireless communication to compatible Talon and Raptor shallow water anchors, as well as Cannon Optimum downriggers. Additional features include wireless software updates from the Humminbird FishSmart App and display of smartphone notifications on your Humminbird. 
• NMEA 2000 networking built in: Connect an accessory NMEA 2000 network to your control head for even more information; from boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking. Additionally, APEX is compatible with CZone® Contact 6, Contact 6 Plus, and digital switching devices.
• Includes control head, transom mount transducer, mounting hardware, power cable, and gimbal mounting bracket. 
• Product comes with a 2-Year Limited Warranty

Specifications:

• Cartography Brand: Humminbird/Navionics
• Included Transducer: XM-14-HW-MSI-T
• Screen Size: 19"
• Touchscreen: Yes
• Transducer Included: Yes
• Box Dimensions: 12"H x 17"W x 27"L WT: 28.4 lbs
• UPC: 082324061653

FLIR M-332 Thermal Camera System - 30 Hz, 320 X 256 Vox Microbolometer NO JCU | E70527

Products Description

FLIR M332 Stabilized Thermal IP Camera [E70527]

DESCRIPTION

The FLIR M332 Stabilized Thermal IP Camera delivers high-performance thermal imaging in a durable, weather-resistant design, making it ideal for law enforcement, commercial, and recreational use. Powered by the advanced FLIR Boson thermal imaging core, the M332 captures obstacles and objects in total darkness, light fog, and glare, providing superior situational awareness. Its two-axis gyro-stabilization and integrated AHRS keep images steady even in heavy seas, allowing for reliable navigation and target tracking.

Engineered for seamless integration, the M332 offers compatibility with ONVIF PTZ security systems, supports H.264 IP video streaming, and provides HD-SDI and analog video output options. When paired with Raymarine Axiom MFDs, it supports ClearCruise™ Augmented Reality, enhancing navigation with essential information overlays.

Key Features

• Advanced Thermal Imaging: Equipped with the FLIR Boson thermal imaging core, providing 320x256 resolution for clear, detailed vision in darkness, fog, and glare.
• Gyro-Stabilized View: Two-axis mechanical stabilization and integrated AHRS keep images steady, compensating for pitch, heave, and yaw.
• Enhanced Navigation in Low Visibility: Ideal for night operations, detecting obstacles and targets in complete darkness and challenging conditions.
• Continuous Pan and Tilt: 360° continuous pan and +/- 90° tilt range for full coverage.
• ClearCruise™ Augmented Reality Integration: Enabled when paired with Raymarine Axiom MFDs, adding vital AR insights for safer navigation.
• Seamless Integration: Compatible with ONVIF for PTZ functionality, H.264 IP video stream, HD-SDI, and analog video outputs for versatile setup.
• Optional Joystick Control: Easily control and operate with an optional joystick control unit (JCU2) for enhanced functionality.

Detailed Specifications

In Package

• 1x M332 Camera
• 1x Camera base-seal
• 1x Camera gasket
• 1x RayNet-to-RJ45 adaptor cable (120 mm / 4.72 in.)
• 1x Right-angled RayNet-to-RayNet cable (3 m / 9.8 ft.)
• 1x Right-angled HD-SDI video cable (with BNC connectors, 3 m / 9.8 ft.)
• 1x Right-angled power/NMEA 0183/video cable (3 m / 9.8 ft.)
• 1x Mounting riser
• 3x Camera fixings: nuts, dome nuts, spring and flat washers, threaded studs
• 2x Self-adhesive decals (for ball-down mounting only)
• 1x Documentation pack

Manuals & Documents

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

General Warranty Info:

• Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
• The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale. 
• Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
• Please reach out to us for any specific warranty information neededabout products and parts you can’t find!

Videos

Shipping

General Shipping Info:

• Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
• Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
• Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
• Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration that as well!