Lighting - Light Bars

40" Adapt E-Series Lightbar - Black

The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGID’s legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. 

The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. 

Features:

• Harness, Switch & Relay Included
• 3 Optic Zones - Scene, Driving, Spot
• Seamless Beam Transition
• Slow Speed, Moderate Speed & High Speed Beam Patterns
• 9-36 VDC
• Two Layers of Adaptive Response
• Active Power Management™ System - Power Capacity Sensing
• Active View Technology™ - Internal GPS Module
• Use In Adapt Mode Or All On
• Alloy Housing and Heatsink
• Unbreakable Polycarbonate Lens
• Pressure Equalizing Vent
• Black Exposed Printed Circuit Board
• Patented Optics
• 50,000 Hr+ LED Lifespan
• Off Road Use Only

In the Box:

• Stainless Steel Mounting Brackets
• Hardware Kit
• Wire Harness
• Relay
• Switch
• Install Instructions

∗ Sold as an Individual 

Specifications:

• Voltage - Input Range (Volts): 12v
• Length (Inches): 40"
• Housing: Black
• Box Dimensions: 7"H x 7"W x 44"L WT: 15.75 lbs
• UPC: 849774033162

20" Adapt™ Light Bar - Black

The Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.

*GPS Module Kit Included

Features:

• Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
• Dash Controller with Wiring Harness
• 8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
• Integrated Optic Design with Spot, Flood, and Driving Zones
• Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
• Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
• 2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
• Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount

Specifications:

• Length (Inches): 20"
• Housing: Black
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 7"H x 8"W x 24"L WT: 13.7 lbs
• UPC: 849774031724

Low Profile Marine Bar - Spot - White

THE LOWEST PROFILE MARINE LED LIGHT BAR ON THE MARKET

The Black Oak Low Pro Light Bar – the lowest profile light bar on the market, designed with a streamlined look that mounts flush to your boat. Engineered with built-in dimming, adjustable feet to set the light at the perfect angle, and an IP69 rating for ultimate resistance against saltwater and extreme conditions.

With 18 ultra-bright LEDs delivering an impressive 12,000 lumens, this light bar defies its slim size with massive light output. Backed by Black Oak's comprehensive lifetime warranty, the Low Pro Light Bar offers the perfect fusion of style, performance, and durability.

Adjustable Feet

Set your light at the perfect angle to avoid bow glare and direct the beam exactly where you want it, even if you plan on under-mounting, we have a wide variety of angled feet available to suit your vessel perfectly.

Dimmable LEDs 

Easily control Lowpro's 12,000+ true Lumens with the flip of a switch—there's no need for third-party remotes or dimming controls. Our cool core heat sync keeps OSRAM LEDS cool to allow maximum output for as long as you need it.

IP-69 Waterproof Housing

This light bar was engineered to withstand the harshest marine elements, it has been thoroughly tested and has achieved an industry-best IP-69 rating, allowing it to be completely submerged without an issue.

Easy to Install

The Lowpro Light Bar is designed to mount to any type of boat or T-top and is thoughtfully crafted with long cords for easy integration to your boats power supply. Need more light? Lowpro can be mounted in an array pattern.

Do It At Night

See more than your competition, Turn night into day, and put your mind at ease with the ability to see channel markers, boats, buoys, and other hazardous objects. The Lowpro Light Bar is 20% brighter than any other low-profile light on the market.

Marine Rated

The Lowpro Light Bar is built to last. Its die-cast aluminum housing and DuPont powder coating is designed to withstand heavy doses of salt water, and UV radiation and can even be immersion up to 3 feet for over 60 hours.

What's In The Box?

• Surface Mount Light
• 4' Attached Tinned Copper Cord
• 2 Standard Foot Mounts
• 316 Stainless Steel Hardware

Features:

• Insanely Bright - 12,000+ TRUE measured lumens
• Dimmable intensity
• Adjustable angled foot attachments
• Lifetime Warranty
• Powered by 18 OSRAM LEDs
• 4 Foot cord for easy installs
• Marine-grade waterproof housing
• Baricoat Ceramic Shield Technology
• Lifetime Support
• Powder-Coated Die Cast Aluminum Construction
• Available in flood or spot configurations
• Marine grade IP69K waterproof housing

Specifications:

• Beam Pattern: Spot
• Housing: White
• Length (Inches): 19"
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 4"H x 5"W x 23"L WT: 4.92 lbs
• UPC: 850044517725

Pro Series 3.0 Curved Double Row 40" LED Light Bar - Combo Optics - White Housing

This 40-inch curved light bar demands respect from anything in the water. Sporting the brightest and most advanced 5-watt LEDs. This all-white waterproof LED light bar is the perfect addition to boats, jeeps, trucks, or even yard lights to illuminate with day-light brightness! Flaunting an IP69K rating, this light can withstand whatever users splash, throw, freeze, or submerge it under. 

Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.

Features:

• 360° Ceramic Protection against UV, Salt Water & Corrosion
• 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
• Heavy-duty Dynamax housing for a 4x stronger frame
• Premium Dupont powder-coating for the highest quality and most resistant finish
• Combination Flood/Spot light pattern offers a superior lighting pattern
• Multi-mount brackets made of 9 gauge marine grade Stainless Steel
• Lens cover made of Lexan with a UV protectant

Activities & Uses: 

• Spot channel markers over 1800 meters away!
• UTV roof mount
• Dunes and desert riding
• Roof rack lighting (white tacoma)
• T-top light

Technical Specifications:

• Total Wattage: 400W
• Amp. Draw: 17.8
• LED Quantity: 40
• Weight: 13.8 lbs.
• Raw Lumens: 52,800
• Warranty: Lifetime
• IP Rating: IP69K    
• Connection: Deutsch connector
• Dimensions with Mounting Bracket (Width x Height): 41.4" x 4.125" 

In the Box:

• Light bar
• Complete wiring harness with fuse, relay, and switch
• 12 gauge wire
• Mounting brackets
• All hardware is ready to install!

*Sold as an Individual

Specifications:

• Beam Pattern: Spot-Flood Combo
• Housing: White
• Length (Inches): 40"
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 6"H x 8"W x 46"L WT: 14.45 lbs
• UPC: 850044517220

Razor Light Bar - Spot - Flush Mount - White

The World’s FIRST flush-mount light bar. Razor was carefully designed to be easily integrated into most existing hardtop, arch, and pilothouse designs – typically with little or no modification to production tooling.

Razor is designed to drop into a contoured pocket molded into a hardtop, radar arch, brow, or other surface. Alternatively, use Razor’s surface mount kit for a sleek, low profile installation on existing flat or slightly crowned tops. Mount forward or aft, horizontal or downward facing. In all installations Lumitec’s careful thermal analysis and self-venting design puts an end to ‘pod’ mounted lightbars, which can overheat and damage surrounding composites in hard tops. Flood and spot/flood beam patterns ensure the light goes where you need it.

Advanced Thermal Management

Razor has been designed and analyzed as a complete system – with careful consideration of the top in which it is mounted. This means that Razor delivers maximum performance while protecting hardtops and pods from dangerously high temperatures.

80% Lower Profile Than Most Other Light Bars On The Market

Razor’s integrated design delivers more power with a cleaner, more streamlined look. Up to 80% more streamlined in fact. As the images to the right demonstrate Razor allows builders to eliminate light pods which must be molded and added separately, saving many hours of costly finishing labor. Razor simply drops into an as-molded recess. CAD models of mold plugs or tooling inserts may be provided upon request.

Features:

• 10,000+ TRUE lumens output
• Surface mountable on top or inverted
• Dimmable with no additional dimmer switch required
• Available with two beam patterns (spot or flood)
• Low profile (1.5") with sleek streamline design
• Powder-coated die-cast aluminum construction
• Voltage: 10-30V DC

Specifications:

• Beam Pattern: Spot
• Housing: White
• Length (Inches): 18"
• Voltage - Input Range (Volts): 12/24v
• Box Dimensions: 4"H x 5"W x 25"L WT: 3.55 lbs
• UPC: 089300015877

Pro Series 3.0 Single Row 30" LED Light Bar - Combo Optics - White Housing

The 30'' Marine Single Row Series LED Light Bar is already turning heads on the water and roadways! Built with 5w Osram LED's and an IP69K housing, this light is virtually indestructible and looks amazing wherever it's mounted. This slim, white, powder-coated 5-watt combo light bar packs a huge punch, throwing a beam over 1500 meters while also giving users an extremely wide flood pattern. 

Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.

Features:

• 360° Ceramic Protection against UV, Salt Water & Corrosion
• 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
• Heavy-duty Dynamax housing for a 4x stronger frame
• Combination Flood/Spot light pattern offers a superior lighting pattern
• Multi-mount brackets made of 9 gauge marine grade stainless steel

Activities & Uses: 

• Mount to the top of a center console without blocking or interfering with a radar
• Ideal trail or dunes light for UTV and ATV enthusiasts
• See buoys, traps, or channel markers with ease
• Perfect as a bumper or grill mount on any white truck, SUV, or Jeep
• Light up the water on a Jon boat, pontoon, or duck boat

Technical Specifications:

• Total Wattage: 150W
• Amp. Draw: 10.3
• LED Quantity: 30
• Weight: 8.6 lbs.
• Raw Lumens: 19,800
• Warranty: Lifetime
• IP Rating: IP69K    
• Dimensions with Mounting Bracket (Width x Height): 32" x 2.6"

In the Box:

• Light bar
• Complete wiring harness with fuse, relay, and switch
• Mounting brackets
• All hardware is ready to install!

*Sold as an Individual

Specifications:

• Beam Pattern: Spot-Flood Combo
• Housing: White
• Length (Inches): 32"
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 6"H x 6"W x 36"L WT: 8.75 lbs
• UPC: 850044517206

Radiance + Curved 30" Light Bar - RGBW

The stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ Curved RBGW light bars. The latest addition to the Radiance light family provides the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ Curved RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary RDS-Series but include a stylish color-changing backlight.

Inside, the Radiance+ Curved RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ Curved RGBW light bars take the customization of your vehicle to the next level. Own the night in style with Radiance+ RBGW lighting.

Features:

• 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode)
• Backlighting is independently controlled using switch logic.
• Fits All RDS-Series Light Covers And Mounts
• Black exposed printed circuit board
• 10-year warranty
• 9-15 V DC
• Black powder coat finish
• Pressure equalizing vent
• IP68 compliant - dust and water ingress
• High-grade aluminum alloy housing and heat sink
• Over/under voltage protection
• high-impact polycarbonate lens
• Mounting brackets are included
• RFI/EMI protection
• Rohs compliant
• Off-road use only

Product Comes with:

• 30-inch Radiance+ RGBW light bar
• Harness
• Mounting brackets
• Media pack

Specifications:

• Size (inch): 30" 
• Weight (Lbs): 8.80    
• Optics: Spot drive
• Watts: 125
• Amp Draw: 8.9
• Raw Lumens: 11880

Specifications:

• Beam Pattern: Spot-Driving Combo
• Housing: Black
• Length (Inches): 30"
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 6"H x 9"W x 34"L WT: 11.8 lbs
• UPC: 849774034206

30" Marine Curved Double Row LED Light Bar - Spot Optics - White Housing - Pro Series 3.0

Stumbling around in the dark, tripping over fishing tackle and poles? Besides the obvious safety factor, that can really turn a great fishing trip or family boating event into a total drag. This 30 in. marine light not only makes it easy for users to maneuver easily but also gives boaters complete control of vision no matter what the seas hurl at them. In a dingy or even in a full-size yacht, Black Oak has boaters covered with the 30-inch marine series double-row LED light bar.

Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.

Built Like a Tank:  

In order to take all of the punishment that any outing can throw, Black Oak's 30 inch light bar is made using the most durable materials and proven manufacturing processes available today. Through this painstaking construction, this boat LED light bar achieved a security rating of IP69K as well as passing US military standards. Black Oak's 30 inch light bar is completely waterproof, corrosion resistant, and has an average lifespan of 50,000 hours of continuous use.

All said, this light bar is almost guaranteed to outlast the vehicle it is mounted on and is backed by Black Oak's limited lifetime warranty and 30 day money-back guarantee.

Features:

• Spot lighting patterm
• 360° Ceramic Protection against UV, Salt Water & Corrosion
• 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
• Heavy-duty Dynamax housing for a 4x stronger frame
• Premium Dupont powder-coating for the highest quality and most resistant finish
• Combination Flood/Spot light pattern offers a superior lighting pattern
• Multi-mount brackets made of 9 gauge marine grade Stainless Steel
• Upgraded bolts with stronger threads for extra protection
• Lens cover made of Lexan with a UV protectant

Activities & Uses: 

• Off-road combo light
• T-Top boat light
• Behind the grill light bar
• UTV roof lighting
• Perfect between tow hooks on white Ram 2500 and 3500's

Technical Specifications:

• Total Wattage: 300W
• Amp. Draw: 12.7
• LED Quantity: 60
• Weight: 10.8 lbs.
• Raw Lumens: 39,600
• Warranty: Lifetime
• IP Rating: IP69K    
• Connection: Deutsch connector
• Dimensions with Mounting Bracket (Width x Height): 31.4" x 4.125"

In the Box:

• 30” curved double row light bar
• Complete wiring harness with fuse, relay, and switch
• 12 gauge wire
• Mounting brackets
• All hardware is ready to install!

*Sold as an Individual

Specifications:

• Beam Pattern: Spot
• Housing: White
• Length (Inches): 30"
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 6"H x 7"W x 36"L WT: 11.15 lbs
• UPC: 850044517565