Hunting & Fishing

Lee's 22' Bright Silver Outrigger Poles - 2" O.D. - Fits OH226S/OH234S Holders [AP3522]

Ships Direct From Manufacturer

 22' Bright Silver Outrigger Poles - 2" O.D. - Fits OH226S/OH234S Holders

22 ft. 6 Sections with Bright Silver Finish, and Black Spike.

Fit the Lee Junior/Wishbone Style Holders with a 1 7/8 in. ID

Specifications:

• Length (Feet): 22'
• Finish: Silver
• Diameter (Inches): 1-7/8"
• Construction: Aluminum
• Box Dimensions: 4"H x 6"W x 51"L WT: 19 lbs
• UPC: 096811352209

Rupp Center Rigger Pole - Aluminum/Silver - 18' [A0-1800-CRP]

18' Center Rigger Pole

18' Center Rigger, three piece construction from high strength, cold drawn aluminum with silver collar. Fits any center rigger base or welded sleeve with 1.5" ID.

Specifications:

• Construction: Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver
• Length (Feet): 18'
• Box Dimensions: 4"H x 6"W x 96"L WT: 9 lbs
• UPC: 784703000597

Rupp Revolution Top Gun Package w/15' Telescoping Poles & Complete Single Line Rigging Kit w/Klickers Release Clips [REV-TPGN-15T]

Ships Direct From Manufacturer 

Revolution Top Gun Package - 15'

Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt! If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.

This package comes complete with a pair of Revolution Bolt-In Top Gun Radial bases, a pair of 15' Telescoping poles and a complete single line rigging kit with Rupp release clips.Top Gun Rigging Kit w/Klickers

Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.

Top Gun Telescoping Poles - 15' Pair

Our 15 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA.

O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases.

Revolution Top Gun Bolt-In Outrigger Holders - Pair

This innovative outrigger base is great for new installations or retrofits on both hard or soft tops. Rupp Revolution Top Gun bases reduce moving parts and offer an efficient and flexible BOLT-IN design that improves durability while reducing cost. Easily bolted into any 'outrigger ready' boat. A quarter turn of the handle disengages the handles locking pin for easy outrigger deployment. The only one of its kind, this product is constructed of aircraft grade anodized aluminum with stainless steel locking components. NO need to lift the outrigger weight for deployment. The outrigger locks itself into position upon retrieval. Rupp Revolutions are designed and manufactured 100% in the USA, utilizing proven materials and processes. All Rupp Top Guns come with a Three Year Warranty and Rupp's 'best-in-class' customer and technical service. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun Poles, either six piece fixed length or telescoping poles in 15' or 18'.

Specifications:

• Construction: Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver
• Length (Feet): 15'
• Box Dimensions: 3"H x 5"W x 11"L WT: 37.8 lbs
• UPC: 784703000412

Striker Base Gunnel Mount
F16-0150-F

The TACO Striker skiff flush mount base is the strongest gunnel mount base on the market today.

• 12 locking positions with our hex nut design including stand up and lay down.
  
• Manufactured to very high standards using marine grade cast 316 stainless steel.
  
• Ambidextrous arms. (will fit both port and starboard bases).
  
• Welded locking adapter for maximum strength.
  
• Removable arms for unobstructed decks.
  
• Template included for installation.
  
• Bases compatible with Lee™, Perko™, & Rupp™ outrigger poles

Specifications:

• Construction: Stainless Steel
• Diameter (Inches): 1-1/2"
• Length (Feet): 6"
• Mounting Style: Flush
• Product Class: Mounting Brackets
• Box Dimensions: 5"H x 17"W x 18"L WT: 10.35 lbs
• UPC: 630838009915

Lee's 1.75" Flush Mount Skiff Series Outrigger Holder [OH2016F]

Ships Direct From Manufacturer

Gunnel Mount Outrigger Holders

OH2016S

Size: 1.75"
Dimensions: 3 1/2 x 6

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Construction: Stainless Steel/Brass
• Diameter (Inches): 1-3/4"
• Finish: Polished/Chrome
• Mounting Style: Gunwale
• Product Class: Mounting Brackets
• Box Dimensions: 5"H x 14"W x 16"L WT: 15.6 lbs
• UPC: 096811201606

Lee's Junior Outrigger Holders 2" x 18" Main Tube [OH226S]

Ships Direct From Manufacturer

The Original Wishbone Outrigger Holder

The Original Wishbone Style Outrigger Holder has been in production for over 45 years. Setting the standard for the industry, our "Junior" outrigger holder has often been imitated, but never equaled. Its ease of operation, adjustable fishing angle, ability to lay down for bridges and small footprint makes it the ideal holder for a multitude of boats.

Durability was the watchword at its conception. You won't find plastic parts in this holder. Constructed of heavy duty brass forgings, heavy wall brass pipe and a stainless steel main tube, it epitomizes strength and reliability. The three point mounting system provides maximum strength and distributes the stress to the mounting surface over a wide area. This holder can be mounted vertically or angled toward the stern. Somewhere between twenty to thirty five degrees is normal.

Model OH226S is for use with our deluxe 19ft. single spreader poles and non-spreader poles up to 22ft.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Construction: Stainless Steel
• Diameter (Inches): 2.0"
• Finish: Polished
• Mounting Style: Side
• Product Class: Mounting Brackets
• Box Dimensions: 6"H x 11"W x 23"L WT: 22 lbs
• UPC: 096811222601

Quick Guide (pdf)

Lee's 2" Flush Mount Skiff Series Outrigger Holder [OH219F]

Ships Direct From Manufacturer

Gunnel Mount Outrigger Holders

Size: 2.0"
Dimensions: 4 x 6 1/2

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Construction: Brass
• Diameter (Inches): 2.0"
• Finish: Chrome
• Mounting Style: Gunwale
• Product Class: Mounting Brackets
• Box Dimensions: 6"H x 11"W x 22"L WT: 21.6 lbs
• UPC: 096811221901

Lee's 18.5' Bright Silver MKII Outrigger Poles 2" OD [AP3519]

Ships Direct From Manufacturer

18.5' Bright Silver Finish - MKII Outrigger Poles 

Specifications:

• Construction: Anodized Aluminum
• Diameter (Inches): 2"
• Finish: Silver
• Length (Feet): 18-1/2'
• Box Dimensions: 5"H x 7"W x 51"L WT: 14 lbs
• UPC: 096811351905