Hunting & Fishing

Original Rod Holder 10" Single Strap

The Original Rod Saver 10 Inch strap is still hard to beat when it comes to keeping fishing rods in the boat and out of the water. This single strap model includes stainless steel mounting hardware

Side Mount 4 Rod Holder

Side Mount Rod Savers are for vertical or horizontal applications.  They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 2-4 Rods 

Grand Slam 300XL Outrigger Mount for 1-1/2" Outrigger

Single-Handle Operation, Now for Larger Hardtops! The Grand Slam 300XL – a stainless-steel / polished, anodized aluminum, single-handle Outrigger Mount designed for hardtops up to 4.5". Delivering enhanced safety and performance, the GS-300XL offers smooth, one-handed operation from the deck. Easily adjust rotation and lift of outrigger poles with the ergonomic crank handle, which locks flush into the base for a sleek, secure fit. Built with an all-metal design—no plastic components—the 300XL provides a superior water seal and increased protection from the elements. The GS-300XL pairs seamlessly with TACO’s award-winning Open Water Internal & Collapsible Carbon Fiber Outrigger Poles, as well as Aluminum or Carbon Fiber Tele-Outrigger Poles up to 22', featuring an underside pin-locking connection that eliminates the need for port and starboard designations.

Features & Benefits:

PIN-LOCKING ARM:

• No port or starboard designation
• Underside locking pin connection 
• Arm lifts to 46.5º from the horizontal position for kite fishing and dock clearance
• Pairs with 1-1/2" DIA Outrigger Poles up to 22'
• Can be used with Outrigger Base Reducer for 1-1/8” DIA poles

HANDLE:

• Stainless-steel, ergonomic, single-hand crank handle with ball bearing
• Enables the lift and rotation of outrigger poles from the safety of the deck
• Unique, locking flip handle 
•   Keeps the handle knob on the bottom when lifting or rotating the outrigger
•   Provides full torque control and safety of deployment at all times
• Robust, dual-detented lifting crank handle locks flush into base

MOUNT:

• Made for hardtops up to 4-1/2" thick
• Ideal for boats 25' to 40'
• Constructed from cast stainless-steel and machined aluminum for a stronger, lighter base
• Each mount weighs 15 pounds (30 pounds per pair)
• Safety detents prevent uncontrolled rotation when deploying outrigger poles
• Allows a controlled 180° rotation, if needed
• Locking head eliminates the downward creep of outrigger poles
• Equipped to handle the torque and whip generated by poles up to 22’
• Includes mounting hardware for easy installation
• Base hole pattern matches all TACO Marine Grand Slam models, as well as the industry standard hole patterns of other top-mount outrigger systems
• Backing plates (BP-0300) sold separately
• 3-year limited warranty

TACO 15' Telescopic Outrigger Poles HD 1-1/2" - Silver/Silver [OT-0542VEL15-HD]

15' Telescoping Outriggers 1-1/2" Diameter

Telescopes to less than 6 feet for bridge clearance, trailering and storage. Designed for universal use with Grand Slams, Sport Slams, Striker Bases, and other brands of mounts that accept 1-1/2" butt end diameter outriggers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Anodized Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver/Silver
• Length (Feet): 15'
• Box Dimensions: 6"H x 9"W x 75"L WT: 13.5 lbs
• UPC: 630838011772

Brochure (pdf)

18' Telescoping Carbon Fiber Outrigger Poles for Sidewinder Mount

Advanced Carbon Composite Telescoping outriggers.  Lee's carbon fiber poles are by far stronger and lighter than any other aluminum pole on the market today.

The perfect solution for trolling a variety of baits. 

Features:

• Light Weight – Makes deployment, retrieval, raising, and lowering a breeze
• Strength – Spreaders become unnecessary
• A glossy clear coat finish is standard

Technical Specifications:

• Length - 18'
• Number of Sections - Four (4)
• Mounting Base - Lee's Sidewinder 1-5/8"
• Rigging – Double rigging 
• Maximum Line Strength – 400 lb. monofilament

*Sold as a Pair

Specifications:

• Construction: Carbon Fiber
• Finish: Black
• Length (Feet): 18
• Box Dimensions: 4"H x 6"W x 77"L WT: 10 lbs
• UPC: 096811393011

Z-30 Top Gun Outrigger Kit - 18'

Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing
kits make it simple to have your boat ready to fish upon receipt. If your
boat came "outrigger ready" with a Rupp outrigger mounting plate or similar
plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.

Top Gun Telescoping Poles - 18' Pair

Our 18 foot telescoping pole is comprised of three sections making it the
most rigid and durable telescoping pole on the market. Very little flex and
robust buttons make Rupp telescoping poles an obvious choice. Our
telescoping poles are an ideal match for any of our Top Gun outrigger bases.
Every part of these telescoping poles are fully serviceable, easy
replaceable and made in the USA.

O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp
outrigger bases.

Top Gun Bolt-In Z-30 Bases - Pair

An innovative advance in Top Gun engineering, Rupp's Z-30 gear drive system
offers unmatched ease of operation for top mount outriggers. Simply turning
the palm-size handle deploys and retrieves riggers smoothly and effortlessly
with an outstanding 30 to 1 advantage. Z-30 Top Guns are engineered for
durability with a high strength, forged aluminum body that protects cutting
edge components. Now with anodized aluminum knob and other enhancements.
Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and
below top operation. Designed to accept Rupp Top Gun poles in 15' or 18'.

Top Gun Rigging Kit w/Klickers

Complete rigging packages that allow you to run One (1) lines on each
rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This
rigging kit is for small outriggers, 20' and under.

Specifications:

• Construction: Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver
• Length (Feet): 18'
• Box Dimensions: 3"H x 5"W x 11"L WT: 40.65 lbs
• UPC: 784703000474

Classic Top Gun Outrigger Kit - 18'

Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing
kits make it simple to have your boat ready to fish upon receipt. If your
boat came "outrigger ready" with a Rupp outrigger mounting plate or similar
plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.

Top Gun Telescoping Poles - 18' Pair

Our 18 foot telescoping pole is comprised of three sections making it the
most rigid and durable telescoping pole on the market. Very little flex and
robust buttons make Rupp telescoping poles an obvious choice. Our
telescoping poles are an ideal match for any of our Top Gun outrigger bases.
Every part of these telescoping poles are fully serviceable, easy
replaceable and made in the USA.

O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp
outrigger bases.

Top Gun Bolt-In Radial Bases - Pair

Designed for T-Tops, half-towers and other aluminum structures, Top Guns set a new standard for convenience of operation. Easily put your riggers out
and bring them in while standing at the console.

Top Gun Rigging Kit w/Klickers

Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.

Specifications:

• Construction: Aluminum
• Diameter (Inches): 1-1/2"
• Finish: Silver
• Length (Feet): 18'
• Box Dimensions: 3"H x 5"W x 11"L WT: 38.3 lbs
• UPC: 784703000498

XD Top Mount

For use on sport fishing boats up to 40 feet.

Features:

• Unique invertible Tigress handle design for use on both soft and hard tops over 2” thick
• Accepts all Tigress XD 1-1/2” butt diameter outriggers and XD 1-1/8” butts using adapter
• Fits Tigress and other industry standard 4” x 6” mounting plates (four 5/16” diameter fasteners)
• Extreme-duty 316 Stainless Steel and anodized aluminum and sealed construction with UV protection
• 24 adjustable/locking system positions (15° increments) featuring Tigress XD 316 Stainless Steel design
• 19 upper-arm angle/locking positions (10° increments) using Tigress XD 316 Stainless Steel detent design with ambidextrous horizontal stops
• Tigress XD 316 Stainless Steel detent design with ambidextrous horizontal stops
• Large 3-lobe UV ergonomic knob with integral detent feature when changing outrigger elevation
• Ergonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops.
• User friendly underside lever actuation, with 8 optional indexable set-up positions
• Standard ¼” diameter locking stainless steel push-in-pin for outriggers
• Fits through all standard 3” diameter mounting plates and hard top holes
• Sold as pair
• 3-Year Limited Warranty