Engine Parts & Service

Balmar Alternator 100 AMP 12V 1-2" Single Foot Spindle Mount J10 Pulley w/Isolated Ground [621-100-J10]

Alternator 100 AMP 12V 1-2" Single Foot Spindle Mount J10 Pulley with Isolated Ground

Alternator, 621 Series, 100A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground 1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines

Replaces: 621-100-SR-IG

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 100A
• Voltage: 12v
• Box Dimensions: 9"H x 10"W x 10"L WT: 12.9 lbs
• UPC: 676205500685

Brochure (pdf)

Trident Marine 2" x 50 Coil Type A2 Fuel Fill Hose [327-2006]

2" x 50' Coil Type A2 Fuel Fill Hose

Trident 2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). 

Features: 

• This hose is built with the best fuel, fire, and age-resistant formulation 
• Provides extraordinary resistance to aging, fire, heat, cold, and the ozone 
• Also, provides excellent bend-ability

Application:

• Marine Fuel Hose for fill and vent plus diesel distribution
• Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel

Construction:

• Tube & Cover: NBR / Neoprene 
• Reinforcement: High tenacity polyester 2 spiral, spring steel helix
• Temperature Range: -20°F to 212°F (-20ºC to 100ºC) 
• Length: 50 ft. (15.24 m) Coil

Specifications:

• Inner Diameter: (inch) 2" / (mm) 50.8
• Outer Diameter: (inch) 2.48 / (mm) 63.5
• Wall: (inch) 0.25 / (mm) 6.4
• Working Pressure: (psi) 50 / (mpa) 0.345
• Bend Radius: (inch) 7.0" / (mm) 178

*The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved

Specifications:

• ID Diameter (inches): 2"
• Length (Feet): 50'
• Box Dimensions: 8"H x 31"W x 31"L WT: 56 lbs
• UPC: 704917009124

ARCO Marine Premium Replacement Outboard Starter f/Yamaha F115, 4 Stroke [3432]

Premium Replacement Outboard Starter for Yamaha F115, 4 Stroke

This outboard starter will fit Yamaha F115, 4 Stroke - 2000-Up, LF115, 4 Stroke - 2000-Up, and 13-tooth drive gear. 

ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.

Features:

• Dynamically tested and packaged for out-of-the-box performance
• Nickel-coated and/or epoxy-painted to reduce corrosion 
• Sealed to minimize water intrusion
• Designed for long life and optimum performance
• Armatures are tested to withstand 50 times operating voltages (12 volts)

Warranty Information:

When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. 

Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration 

Replaces:

• HITACHI Outboard Starter S114-838A
• MERCURY Outboard Starter 50-881368T1
• MERCURY Outboard Starter 50-881368T2
• MERCURY Outboard Starter 8M0007971
• YAMAHA Outboard Starter 68V-81800-00
• YAMAHA Outboard Starter 68V-81800-01
• YAMAHA Outboard Starter 6C5-81800-00
• YAMAHA Outboard Starter 6CJ-81800-00
• SIERRA Outboard Starter 18-6427

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Quick Guide (pdf)

ARCO Marine Premium Replacement Tilt Trim Motor f/Late Model Mercruisers w/Oildyne Pump [6275]

Premium Replacement Tilt Trim Motor for Late Model Mercruisers with Oildyne Pump

Replacement outboard tilt trim motor that will fit late model Mercruiser w/Oildyne pump, Ring Terminal Ends. 

ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.

Features:

• Tilt trim motors are dynamically tested to ensure out-of-the-box performance 
• Motor shafts induction case hardened at bearing surfaces for superior wear resistance 
• Epoxy Powder coated for maximum insulation protection

Warranty Information:

When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. 

Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration 

Replaces:

• MERCURY 14336A6
• MERCURY 14336A8
• MERCURY 14336A9
• MERCURY 14336A12
• MERCURY 14336A15
• MERCURY 14336A17
• MERCURY 14336A20
• MERCURY 14336A25
• MERCURY 14336A31
• MERCURY 865380A03
• MERCURY 865380A13
• MERCURY 88183A5
• MERCURY 88183A6
• MERCURY 88183A8
• MERCURY 88183A11
• MERCURY 88183A12
• MERCURY 88183A13
• MERCURY 88183A25
• SERRA 18-6769 / 18-6769-1
• SIERRA 18-6813

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Quick Guide (pdf)

Trident Marine 1-1/2" x 50 Coil Flex Marine Wet Exhaust  Water Hose - Black [250-1126]

1-1/2" x 50' Coil - Flex Marine Wet Exhaust & Water Hose - Black

Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.

Features: 

• Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
• Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved

Application:

• Trident Flex wet exhaust hose for longer bent connections
• In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses

Construction:

• Tube & Cover: High temp EDPM rubber
• Color: Black with blue stripe
• Reinforcement: Multi-ply, high-tenacity polyester, steel helix
• Temperature Range: 250°F (121°C)
• Length: 50’ (15.24m)

Specifications:

• Inner Diameter: (inch) 1-1/2" / (mm) 38
• Outer Diameter: (inch) 1.97 / (mm) .05
• Working Pressure: (Psi) 60 / (bar) 4.1
• Bend Radius: (inch) 4.0" / (mm) 102
• Weight: (Lb./50ft.) 45 / (Kg/m) .518

*Burst Pressure is 4 x Working Pressure

Specifications:

• ID Diameter (inches): 1-1/2"
• Length (Feet): 50'
• Box Dimensions: 5"H x 27"W x 27"L WT: 45.2 lbs
• UPC: 704917007700

Quick Guide (pdf)

Alternator 120 AMP Kit 12V 3.15" Dual Foot Saddle Dual Vee Pulley Regulator & Temp Sensor

Kit Includes: a 60-120-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware

60-120-DV Alternator: 120A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated Ground

Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines

Replaces: 60-YP-MC-120-SR-KIT

Specifications:

• Amperage: 120A
• Voltage: 12v
• Box Dimensions: 10"H x 11"W x 14"L WT: 9 lbs
• UPC: 676205000512

Alternator 250 AMP Kit 12V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp Sensor

Kit Includes: XT-DF-250-J10 Alternator, MC-618 Regulator, Temperature Sensors & Mounting Hardware

XT Series Alternator: 250A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case Ground

Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines

Replaces: AT-DF-MC-200-KIT, AT-DF-200-J10-KIT

Specifications:

• Amperage: 250A
• Voltage: 12v
• Box Dimensions: 11"H x 11"W x 14"L WT: 21 lbs
• UPC: 676205502276

Alternator 120 AMP 12V 1-2" Single Foot Spindle Mount J10 Pulley with Isolated Ground

Alternator, 621 Series, 120A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground 1" Motorola-Style Mounting.

Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines.

Replaces: 621-120-SR-IG

Specifications:

• Amperage: 120A
• Voltage: 12v
• Box Dimensions: 8"H x 10"W x 10"L WT: 6.9 lbs
• UPC: 676205751186