Electrical

Alternator 250 AMP 12V 3.15" Dual Foot Saddle K6 Pulley

Alternator, XT Series, 250A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case Ground

Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines

Replaces: AT-DF-200-12-IG, AT-DF-200-K6

Specifications:

• Amperage: 250A
• Voltage: 12v
• Box Dimensions: 9"H x 10"W x 10"L WT: 16 lbs
• UPC: 676205502283

Alternator 120 AMP 12V 1-2" Single Foot Spindle Mount J10 Pulley with Isolated Ground

Alternator, 621 Series, 120A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground 1" Motorola-Style Mounting.

Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines.

Replaces: 621-120-SR-IG

Specifications:

• Amperage: 120A
• Voltage: 12v
• Box Dimensions: 8"H x 10"W x 10"L WT: 6.9 lbs
• UPC: 676205751186

Balmar Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Dual Pulley Regulator  Temp Sensor [60-YP-MC-100-DV]

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Dual Pulley Regulator & Temp Sensor

Kit Includes: a 60-100-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware

60-100-DV Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, Dual Deep Vee Pulley, Isolated Ground

Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines

Replaces: 60-YP-MC-100-SR-KIT

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 100A
• Voltage: 12v
• Box Dimensions: 10"H x 11"W x 14"L WT: 10.8 lbs
• UPC: 676205750738

Brochure (pdf)

Phoenix Smart IP43 Charger 24/25 (3) 120-240VAC Requires 5-15P Mains Cord

With boat owners in mind, this adaptive 5-step charger can provide either 30A or 50A of charge to each of the three battery banks. Or the Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. 24V models are available with a 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.

Features:

• Bluetooth Smart built-in: The wireless solution to set up, monitor, update and synchronize Phoenix Smart IP43 Chargers.
• Phoenix Smart (1+1): two outputs to charge 2 battery banks: The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
• Phoenix Smart (3): three full current outputs to charge 3 battery banks: Each output can supply the full rated output current. But the total of the 3 outputs combined can never exceed the current rating of the charger.
• Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. 
• Adaptive 6-stage charge algorithm: bulk– absorption – recondition – float – storage – refresh: The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used.
• The right amount of charge: variable absorption time: When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery will be fully charged.
• Preventing damage due to excessive gassing: the BatterySafe mode: If in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
• Less maintenance and aging when the battery is not in use: the Storage Mode: The Storage Mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the Storage Mode, float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
• Also charges Li-ion (LiFePO4) batteries: Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively, full control of voltage and current can be achieved with Bluetooth.
• Fully programmable charge algorithm: The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button.
• Optional external battery voltage and temperature sensing via Bluetooth: A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more Phoenix Smart IP43 Chargers.
• Remote on-off: The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. 
• VE.Direct interface: For a wired data connection to a Color Control panel, PC, or other devices.
• Programmable relay: Can be programmed using the VE.Direct interface or a Bluetooth-enabled device to trip on an alarm or other events.
• Synchronized charging: Pairing two or more Phoenix Smart IP43 Chargers in a VE.Smart Network, enables synchronized charging. This improves the charge efficiency and battery life.

Specifications:

• Charger Input - Voltage: 120/240v
• Charger Output - Amps: 25a
• Charger Output Voltage: 24v
• Charging Banks: 3
• Portable: No
• Box Dimensions: 6"H x 10"W x 11"L WT: 7 lbs
• UPC: 8719076053552

Balmar Alternator 120 AMP 12V 4" Dual Foot Saddle K6 Pulley w/Isolated Ground [604-120-K6]

Alternator 120 AMP 12V 4" Dual Foot Saddle K6 Pulley with Isolated Ground

Alternator, 604 Series, 120A, 12V, Saddle Mount (Dual Foot), 4in, K6 Serpentine Pulley, Isolated Ground 4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere Engines

Replaces: 604-120-SR-IG

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 120A
• Voltage: 12v
• Box Dimensions: 9"H x 9"W x 10"L WT: 13.35 lbs
• UPC: 676205750615

Brochure (pdf)

Balmar Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle K6 Pulley Regulator  Temp Sensor [60-YP-MC-100-K6]

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp Sensor

Kit Includes: a 60-100-K6 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware

60-100-K6 Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Isolated Ground

Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines

Replaces: 60-YP-MC-100-SR-KIT

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 100A
• Voltage: 12v
• Box Dimensions: 10"H x 11"W x 14"L WT: 8.6 lbs
• UPC: 676205750745

Brochure (pdf)

Balmar Alternator 100 AMP Kit 12V 1-2" Single Foot Spindle Mount J10 Pulley Regulator  Temp Sensor [621-VUP-MC-100-J10]

Alternator 100 AMP Kit 12V 1-2" Single Foot Spindle Mount J10 Pulley Regulator & Temp Sensor

Kit Includes: 621-100-J10 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware

621-100-J10 Alternator: 100A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground

1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines

Replaces: 621-VUP-MC-100-SR-KIT

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 100A
• Voltage: 12v
• Box Dimensions: 10"H x 11"W x 14"L WT: 15.85 lbs
• UPC: 676205500722

Brochure (pdf)

MultiPlus 12/2000 80-50 120V VE.Bus UL Listed

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

Unique PowerAssist Feature

The MultiPlus will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.

Uninterrupted AC Power (UPS function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually Unlimited Power Thanks to Parallel Operation

Up to 6 Multis can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have parallel, three-phase, and split-phase capabilities.

Remote Monitoring & Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more.

Specifications:

• Charger Input - Voltage: 120VAC
• Charger Output - Amps: 80A
• Charger Output Voltage: 120VAC
• Charging Banks: 1
• Inverter Cont. Output Wattage: 2000VA / 1600W
• Inverter Input Voltage: 12VDC
• Inverter Output Voltage: 120VAC
• Outlet Qty: None
• Box Dimensions: 10"H x 13"W x 23"L WT: 38.8 lbs
• UPC: 8719076058144