Electrical - Battery Chargers

Pro-Guide 2 Bank On-Board Battery Charger - (1) 12V / (1) 36V - 30-Amp [PGC-1236X]

2 Bank On-Board Battery Charger - (1) 12V / (1) 36V - 30-Amp

The Pro-Guide PGC-1236x is a 12V Lead Acid / AGM / Lithium & 36V Lithium on-board battery charger.

Each 12V Bank can select one of three charge profiles, and allows the consumer to mix and match for their optimum setup.

Allowing the charger to supply a single 12V Charging Bank for Lead Acid, AGM, or Lithium Chemistries, and then a second bank to charge a 36V Lithium Battery(s).

Activation Mode supplies a short supply of voltage to wake any asleep Lithium Battery, or hold the button for (3-5) seconds to enter a manual Activation Mode.

The PGC Line is designed to stay plugged in year-round. With the Intelligent PGC Algorithm, each PGC Charger checks each battery's state of charge on a specific timeline, ensuring that you'll be fully charged for your next adventure.

With over 40 years of experience, Pro-Guide is proud to stand behind this charger with a 2 Year Free and 4 Year Total Warranty.

Protection:

• Output Over-Voltage
• Output Over Current
• Output Short Circuit
• Output Reverse Polarity
• Over Temperature

Input:

• Input Voltage: AC 110-120V
• Frequency: 60Hz
• Input Current: <6A

Specifications:

• Battery Type: 12V Lead Acid/AGM/Lithium & 36V Lithium
• Output Voltage: DC 12V x 1 & DC 36V x 1
• Max Output Voltage: 14.1-14.3 for Lead Acid Battery, 14.3-14.7 for AGM Battery, & 14.4-14.7 for Lithium Battery & 43-44 for 36V Lithium Battery 
• Output Current: 20A for 12V Bank & 10A for 36V Bank
• Length: 13.15"
• Width: 9.96"
• Height: 3.86"
• Weight: 24.3 lbs
• IP Rating: 68

Specifications:

• Charger Input - Voltage: 120v
• Charger Output - Amps: 30a
• Charger Output Voltage: (1)12v / (1)36v
• Charging Banks: 2
• Portable: No
• Box Dimensions: 8"H x 13"W x 17"L WT: 22.1 lbs
• UPC: 810145911198

Brochure (pdf)

SmartSolar MPPT 250/70-TR VE.Can

The SmartSolar MPPT is packed with advanced technology to get the most out of your solar panels whilst protecting your batteries. It operates at 98% efficiency with natural cooling and is engineered to withstand the toughest conditions.

The lightning-fast maximum power point tracking converts all available sunlight into useful energy. Its charge algorithms enhance power output and extend battery life by intelligently managing charging cycles. Built-in SafetyShield+ features such as over-temperature, short-circuit, and reverse polarity protection safeguard your batteries from potential issues.

Simply put: the SmartSolar MPPT is the smartest solar charge controller under the sun.

Features:

• Lightning-fast maximum power point tracking
• Remote Management optional
• Intelligent charge algorithm
• VictronConnect App
• Wireless charging synchronisation
• SafetyShield+

Specifications:

• Charger Input - Voltage: 250V
• Charger Output - Amps: 70A
• Charger Output Voltage: 12V, 24V 36V, 48V
• Charging Banks: 1
• Continuous Amperage: 35A/MC 4 conn
• Box Dimensions: 6"H x 10"W x 11"L WT: 8.3 lbs
• UPC: 8719076051213

ProLite Charger 4 Bank - 12V - 40A

Built for reliability, efficiency, and durability in the harshest marine conditions. With 4 independent DC outputs, it safely and efficiently charges multiple battery banks at once, making it the perfect choice for today’s demanding boats and yachts.

Features:

• High Performance - 40A charging power across 4 DC outputs.
• Prewired Convenience - Equipped with 6’ tinned marine-grade cables and integrated fusing for fast, safe installation.
• Smart Connectivity - Bluetooth-enabled with the Dolphin Connect App for real-time monitoring and control.
• Rugged Marine Design - IP55-rated fanless construction ensures quiet, dust-proof, and splash-resistant operation—perfect for harsh marine environments.
• Versatile & Efficient - Compatible with AGM, Gel, Lithium, and Lead-Acid batteries.
• Compact & Lightweight - Space-saving design without compromising durability or power.

Dual Pro HF Eagle ES800 Series 24V Single Lithium Charger [ES0800-24V003]

HF Eagle ES800 Series 24V Single Lithium Charger

For Marine, Golf, Aerial, Emergency Services, Floor Scrubbers, and more. 

Applications:

• Marine: Connect to our PROView Link app to choose the right algorithm for your Lithium, AGM, or Lead Acid batteries and more. 
• Golf & LSV: Pair our portable charger with our 7.5 ft. interchangeable connector cables. We offer options for most major cart manufacturers. Our PVL app allows you to choose the algorithm for your battery(s) chemistry.
• Aerial Equipment: Our chargers work with most Scissor and Boom Lifts, as well as various carts and burden carriers' manufacturers.
• Emergency Services: First Responders & Warning Systems depend on our chargers to keep their batteries charged and conditioned for use when needed.
• Floor Scrubbers: Rugged and Waterproof to work in any Janitorial/Industrial environment.
• Your Equipment: The Eagle Series HF (ES800) is the perfect choice for any application requiring a Powerful, Durable, Waterproof Charger with Advanced Data Monitoring & Logging capabilities, with selectable algorithms all accessible via our free-to-download PROView Link App.

Features:

• Portable and Onboard Options
• Output: 800W - 24VDC @ 33.3A, 36VDC @ 22.48VDC, & 48VDC @ 16.7A
• AC Universal Input (85-270 VAC 50/60HZ)
• CAN Capable
• PROView Link App Enabled to receive over-the-air updates and more
• Dimensions: L10" x W7.15" x H4"
• Weight: 11 LBS
• Developed to be interleaved for higher output requirements
• US Designed and Assembled

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Quick Guide (pdf)

SmartSolar MPPT 450/100-MC4 VE.Can VE.Direct 450/100

The SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid-connected battery systems.

In a 5.76kW and 11.52kW model, features include a wide 65-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, a display screen, fully programmable battery charging parameters, and active cooling. The new metal case design and fully covered electrical connections improve safety and modernize the presentation in line with the latest suite of Victron products.

MPPT: Ultra Fast Maximum Power Point Tracking

The SmartSolar RS solar charge controller connects to a PV array of between 65 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more.

Setup & monitor with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect app. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

Daisy Chain Additional Units

The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy chained” to each other with an RJ45 cable.When connected to each other, all individual charge controllers, will synchronise their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Display

The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.  

VictronConnect

VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.

Marine Battery Charger 115/230V Input 32VDC - 30A - 3-Bank

Sentry SFR Ferroresonant series marine battery chargers are in an elite class, setting the standard for dependable battery chargers. Sentry chargers are designed to operate for decades in the harsh marine environment. They are completely field serviceable and come with a 2-year parts and labor warranty.

Features:

• Available in 12vdc, 24vdc and 32vdc models
• Completely charge the battery and turn off to prevent overcharging
• Ignition protected to allow engine room installations
• Charging outputs for Lead-Acid, Optional- AGM, Gel, and Lead Calcium

Specifications:

• Charger Input - Voltage: 115/230v
• Charger Output - Amps: 30a
• Charger Output Voltage: 32vdc
• Charging Banks: 3
• Portable: No
• Box Dimensions: 13"H x 21"W x 21"L WT: 44 lbs
• UPC: 850046155901

PRO Evo3 - 24V - 60A

This range of Marine Battery Chargers is the result of the latest technological advancements in the world of power electronics. By comparison to the Dolphin Pro Chargers, an additional DC output has been added while reducing the overall dimensions by 16% (12v/90a, 24v/40a, 24v/60a) and 30% (24v/100a). 

They are more compact and 30-60% lighter (9 lbs.) offering the highest power-to-space ratio on the market! With 4 independent isolated DC outputs and NMEA 2000 communication, the Dolphin PRO Evo3 meets the demands of today’s leading boat builders and modern electrical systems.

Features:

• Ultra-compact and lightweight - Thanks to the new electronics this new generation of product is 30 to 60% lighter than the previous one. The weight of the 24-volt 100-amp unit is just under 9 Lbs.
• 4 Independent isolated outputs - All PRO EVO3 offer 4 independent isolated DC outputs. It allows to simplification of the charging system consisting of several battery banks.
• NMEA 2000 - NMEA 2000 plug-and-play communication skills. All PRO EVO3 chargers feature CAN communication ports including certified N2K port with latest PGEN.
• High-Efficiency DSP technology - PRO EVO3 Chargers deliver full power even at very high temperatures (up to 50°C/122°F). This "no derating" feature is unique on the market.
• Selectable Battery Chemistries - 8 Selectable charging profiles including Lead Acid, Gel, AMG, and Lithium-Ion batteries with temperature compensation.
• Ignition Protected - PRO EVO3 12.90 is now ISO 8846 and SAE J1171 certified.

Marine Battery Charger 115/230V Input 12VDC - 60A - 3-Bank

Sentry SFR Ferroresonant series marine battery chargers are in an elite class, setting the standard for dependable battery chargers. Sentry chargers are designed to operate for decades in the harsh marine environment. They are completely field serviceable and come with a 2-year parts and labor warranty.

Features:

• Available in 12vdc, 24vdc and 32vdc models
• Completely charge the battery and turn off to prevent overcharging
• Ignition protected to allow engine room installations
• Charging outputs for Lead-Acid, Optional AGM, Gel, and Lead Calcium

Specifications:

• Charger Input - Voltage: 115/230v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12vdc
• Charging Banks: 3
• Portable: No
• Box Dimensions: 10"H x 20"W x 20"L WT: 39.6 lbs
• UPC: 850046155918