Electrical - Battery Chargers

Mac Plus 12/48-15

Boost Your Service Battery

Too often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus 48V and 36V solve that problem. With brand-new bi-directional technology, the Mac Plus can use each side as an input or output, delivering a reliable and consistent charge to both service and starter batteries.

Proven Mastervolt Quality

The Mac Plus uses the proven Mastervolt 3-step+ charge algorithm, delivering a quick and easy charge, even to completely flat batteries. By knowing when the engine is running and providing charge, you can also be sure that the Mac Plus will never drain your starter battery.

A robust design holds up in even the harshest conditions, with battery temperature-optimized charging and high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.

Total Power Flexibility

With a wide DC input range, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.

Parallel configuration of up to ten units will provide over 100 amperes. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 36/48V to 12/24V and vice versa.

Analog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.

Superior Monitoring & Control

Compatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.

Features:

• Bi-directional technology
• Get either 48V or 36V power from a single unit
• Fast and safe charging, even during short trips
• Fanless design for silent operation
• Suitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)
• Even charges fully depleted batteries
• Engine run detection protects the starter battery
• Adjustable current limits to meet Euro 5/6 requirements
• Voltage stabilization protects sensitive equipment, lights, and loads
• Parallel operation to obtain charging capacities well over 100 Amps
• MasterBus, CZone, and NMEA 2000 compatible, with intelligent system monitoring and automation
• Temperature compensation and voltage sense for an optimal charging result
• E-Mark/R10 certification for mobile applications
• Power supply mode offers stable power for sensitive loads
• Heavy-duty connections for easy installation and quick setup via DIP switches

General Specifications:

• Battery Voltage Sense: Yes
• Status indicator: Yes, 3 color double LED
• Communication protocol: MasterBus, CZone & NMEA 2000
• Output voltage: 30-60 V DC
• Nominal output voltage: 36/48 V
• Output voltage stabilization: 2 % at extremes of temps, load, and input
• Output voltage ripple (peak-peak): Max. 1 %
• Max. output power: 900 W
• Max. output current: 15 A
• Nominal input voltage: 12 V DC
• Input voltage range: 8-16 V
• Max. input current: 60 A
• Galvanic isolation: No
• Efficiency: > 95 % (at nom. input voltage, full load); 97 % peak
• Parallel configuration: Yes, up to 4
• Alarm contact: Yes, through MasterBus, CZone, DIP Switch, or remote switch
• Engine run signal input: Yes (active high/active low)
• DIP switches: Yes, for basic setup
• Dimensions, hxwxd: 255x165x66 mm, 10.0 x 6.5 x 2.6 inch
• Weight: 2 kg, 4.4 lb
• Compliance: CE, E-Mark, SAE J1171, ISO 8846 ignition protected, ABYC & UKCA

Technical Specifications:

• Battery types: Gel, AGM, Lithium Ion, user-defined
• Power consumption: < 5 mA, < 10 mA in CZone, < 1 mA in MasterBus
• Temperature range (ambient temp.): - 25 °C to 60 °C; derating > 40 °C/104 °F
• Cooling: Natural cooling
• Protection degree: IP23
• Protections: Overload, over-temperature, DC short circuit, reversed polarity (fuse)

Specifications:

• Charger Input - Voltage: 12v
• Charger Output - Amps: 15a
• Charger Output Voltage: 36/48V
• Box Dimensions: 4"H x 9"W x 15"L WT: 5.6 lbs
• UPC: 816882023446

PS2 Auto 2 Bank Battery Charger with 2 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s PS2 Auto 15A - 2-Bank Lithium/AGM Battery Charger (PN: PS2AUTO).

B.O.S. Battery Optimization System - 12V - 2-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
• Golf
• Industrial
• Aerial Equipment
• Solar Power
• Electrical Vehicles
• Communications
• Defense/Military

PS2 Auto 15A - 2-Bank Lithium/AGM Battery Charger

Latest Technology:

• Detects if a battery is Lithium or AGM
• Automatically charges both Lithium and AGM batteries for optimal performance
• Fully automatic. Completely and safely charges both Lithium and AGM batteries
• Algorithms designed and validated with battery manufacturers for a 100% charge
• The startup feature will wake up batteries that have turned off due to low-voltage protection
• Auto return to charging feature
• Quickest charge times in its class
• Unbeatable performance, reliability, safety, and quality delivered by DUAL PRO®

Features:

• Waterproof - Use on land and in fresh and saltwater
• TROUBLE-FREE—Just Plug It In and Forget It!
• Independent outputs
• Fully automatic/multi-stage charging
• On-board diagnostic codes
• FCC 15 Parts A & B interference compliant
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)
• 3-Year Warranty

AutoProfile Intuitive Charging Technology Lithium/AGM

Professional and Sportsman Series chargers have set the standard in the marine industry for more than two decades, known as the safest, most reliable, and best performing chargers in the industry.

AutoProfile Intuitive Charging Technology provides flexibility for a charging system, ready for the ever-changing lithium battery technologies. No matter if users choose Lithium or AGM batteries for the boat, Dual Pro is ready to keep a boat on the water longer, enhancing battery performance and extending battery life.

Specifications:

• Charger Input - Voltage: 120v
• Charger Output - Amps: 30a
• Charger Output Voltage: 12/24v
• Charging Banks: 2
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 18.9 lbs

RS2 2 Bank Battery Charger with 2 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s RealPRO Series Battery Charger - 12A - 2-6A-Banks - 12V/24V (PN: RS2).

B.O.S. Battery Optimization System - 12V - 2-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
• Golf
• Industrial
• Aerial Equipment
• Solar Power
• Electrical Vehicles
• Communications
• Defense/Military

RealPRO Series Battery Charger - 12A - 2-6A-Banks - 12V/24V

RealPro Series battery chargers (formerly Recreation Series) are an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier-duty and higher amperage product.

It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers.

Battery Charging Systems Designed for Everyday Applications:

• Affordable, Reliable, and Safe
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE – Just Plug It In and Forget It!
• Join Over 750,000 of Dual Pro’s Satisfied Customers!
• Wide Variety of Applications
• Universal Input (100-240 VAC 50/60HZ)

Features:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• Two-year warranty
• DC charge cables = 5ft and AC power cord = 3ft
• Approved and meets ISO 8846 Marine standards
• Models available to charge 12-24V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

May Be Used in Many Types of Sporting Applications Including:

• Bass Boats
• Runabouts
• Pontoons
• Automobiles
• ATVs
• Golf Carts

Specifications:

• Charger Input - Voltage: 120/240v
• Charger Output - Amps: 12a
• Charger Output Voltage: 12/24v
• Charging Banks: 2
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 11.2 lbs

RS3 3 Bank Battery Charger with 2 Bank B.O.S.

This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s RealPRO Series Battery Charger - 18A - 3-6A-Banks - 12V-36V (PN: RS3).

B.O.S. Battery Optimization System - 12V - 2-Bank

B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.

Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.

B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.

B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.

Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.

Features:

• Available in 6V, 8V, and 12V configuration
• Up to six batteries in a series
• Battery Selection and Prediction (BSAP-24) algorithm
• Less than 1mA sleep mode
• Transfer rate up to 7.5A
• Self-powered
• Any type of battery chemistry

Used in Any Application Where Batteries Are in Series:

• Marine
• Golf
• Industrial
• Aerial Equipment
• Solar Power
• Electrical Vehicles
• Communications
• Defense/Military

RealPRO Series Battery Charger - 18A - 3-6A-Banks - 12V-36V

RealPro Series battery chargers (formerly Recreation Series) are an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier-duty and higher amperage product.

It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers.

Battery Charging Systems Designed for Everyday Applications:

• Affordable, Reliable, and Safe
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE – Just Plug It In and Forget It!
• Join Over 750,000 of Dual Pro’s Satisfied Customers!
• Wide Variety of Applications
• Universal Input (100-240 VAC 50/60HZ)

Features:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• Two-year warranty
• DC charge cables = 5ft and AC power cord = 3ft
• Approved and meets ISO 8846 Marine standards
• Models available to charge 12-24V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

May Be Used in Many Types of Sporting Applications Including:

• Bass Boats
• Runabouts
• Pontoons
• Automobiles
• ATVs
• Golf Carts

Specifications:

• Charger Input - Voltage: 120/240v
• Charger Output - Amps: 18a
• Charger Output Voltage: 12/24/36v
• Charging Banks: 3
• Portable: No
• Box Dimensions: 3"H x 6"W x 9"L WT: 14.6 lbs

Mac Plus 24/12-50 + CZone

Boost the Service Battery

Too often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to the service battery. And, by knowing when the engine is running and providing charge, users can be sure that the Mac Plus will never drain a starter battery.

Proven Mastervolt Quality

Users get peace of mind knowing that they have the best on board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even for completely flat batteries.

A robust design holds up in even the harshest conditions, with battery temperature-optimized charging and a high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan.

Total Power Flexibility

With a wide DC input range, the Mac Plus allows for all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.

Parallel configuration of up to ten units will provide over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.

Analog voltage sense ports are also available to compensate for voltage drops and maintain proper charging.

Superior Monitoring & Control

Compatibility with CZone®, NMEA 2000®, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.

Features:

• Fast and safe charging, even during short trips
• Fanless design for silent operation
• Suitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)
• Even charges fully depleted batteries
• Engine run detection protects the starter battery
• Adjustable current limits to meet Euro 5/6 requirements
• Voltage stabilization protects sensitive equipment, lights, and loads
• Parallel operation to obtain charging capacities well over 100 Amps
• MasterBus, CZone, and NMEA 2000 are compatible for intelligent system monitoring and automation
• Temperature compensation and voltage sense for an optimal charging result
• E-Mark/R10 certification for mobile applications
• Power supply mode offers stable power for sensitive loads
• Heavy-duty connections for easy installation and quick setup via DIP switches

Specifications:

• Battery Temperature Sensor: Yes, included
• Battery Voltage Sense: Yes

General Specifications:

• Status Indicator: Yes, 3-color LED
• Communication Protocol: MasterBus, CZone & NMEA 2000
• Output Voltage: 10-15 V
• Nominal Output Voltage: 12 V
• Output Voltage Stabilization: 2 % at extremes of temperatures, load, and input
• Output Voltage Ripple (peak-peak): Max. 1 %
• Max. Output Power: 750 W
• Nominal Output Power: 710 W
• Max. Output Current: 50 A
• Output Charge Current (3-step mode): 50 A
• Nominal Input Voltage: 24 V
• Input Voltage Range: 19-30 V
• Max. Input Current: 30 A
• Galvanic Isolation: No
• Voltage Limited: Yes
• Efficiency: > 95 % (at nom. input voltage, full load); peak 97
• Parallel Configuration: Yes
• Alarm Contact: Yes, through MasterBus
• MasterBus Powering: No
• Engine Run Signal Input: Yes (active high/active low)
• DIP Switches: Yes, for basic setup
• Dimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inch)
• Weight: 2 kg (4.4 lb)
• Compliance: CE, E-Mark, SAE J1171 & ISO 8846 Ignition Protected

Technical Specifications:

• No-load Consumption: < 2 mA
• Charge Characteristic: 3-traps+
• Battery Types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, user-defined
• 3-Step Charge Option: Yes (DIP switch settings)
• DC Consumption: < 5 mA
• Connections: 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on/off, temperature sensor, voltage measurement
• Temperature Range (ambient temp.): -25 degrees C to 60 degrees C; derating > 40
• Cooling: Natural cooling
• Protection Degree: IP23
• Protections: Overload, over temperature, DC short circuit, reversed polarity (fuse)
• MasterBus Compatible: Yes

Specifications:

• Charger Input - Voltage: 24v
• Charger Output - Amps: 50a
• Charger Output Voltage: 10-15v
• Box Dimensions: 4"H x 9"W x 15"L WT: 5.65 lbs
• UPC: 816882023514

PT-24-45U Battery Charger

“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.

A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

• 24-volt model
• “Smart” circuitry provides three-stage charging – bulk, absorption, float
• Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
• Multiple isolated output banks; ammeter indicates total output current
• The optional sensor adjusts output voltage based on battery temperature
• Current limiting prevents damage from overloading
• Use as a power supply; can power loads without a battery in line
• Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
• Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
• Install in conjunction with PT-MCU for additional control and monitoring
• ABS-type approval for battery charging and power supplies

Specifications:

• Input VAC (50-60 Hz.): 90 – 264
• Input Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7 
• Power Factor: .98@115V and .95@230V
• Max Output Amps: 45
• Output Banks: 3
• Battery Capacity (Amp-Hours): 90 – 450
• Operating Temp. Rating Reference: T-5
• Case Size Reference: A-4
• Case Size (H x W x D): 14.8B x 9.6 x 5.6D inches (37.6D x 24.4 x 14.2D centimeters) *Note with Dripshield installed D add 1” (2.54 cm) to height and .5” (1.2 cm) to depth
• Weight Lbs./Kg: 12/6
• Optional Temp. Sensor Model: TCS-12/24    
• Remote Panel Model: RP
• Compliance Reference: EN, CE, ABS

Temperature Rating References:

• Temperature: -20 degrees C to +70 degrees C    
• Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C

Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):

• Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
• Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load

Compliance References:

• UL: UL 1950 (per DNB report)
• CG: USCG CFR 183.410 (Ignition protected)
• EN: EN 60335-1
• CE: Carries the CE mark
• ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.

Options:

• Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)

Specifications:

• Charger Input - Voltage: 115/230v
• Charger Output - Amps: 45a
• Charger Output Voltage: 24v
• Charging Banks: 3
• Portable: No
• Box Dimensions: 10"H x 14"W x 20"L WT: 18 lbs

Dolphin Charger Premium Series Dolphin Battery Charger - 12V, 60A, 110/220VAC - 3 Outputs [99050]

Premium Series Dolphin Battery Charger - 12V, 60A, 110/220VAC - 3 Outputs

The Premium range of chargers is perfect for most of today’s battery technologies, with a load capacity of up to 400 amps at 12V. These compact chargers are ideally suited to recharging batteries in light vehicles, ambulances, repair vehicles, and motorhomes. The Premium charger is perfect for workshops, pleasure boats, computer cabinets, and starter batteries for gen-sets.

The robust compact housing is lighter and easier to install than ever thanks to better mounting design and electrical speed connections. Outstanding features include the latest battery charging technology and a new charging program for lithium-ion-iron-phosphate batteries. These chargers come in a nice package, making them ideal for retailers.

Features:

• 12V, 60A
• Digital management with up-to-date RISC micro-controller
• 4 charging programs, including one for Lithium-Ion-Iron-Phosphate with integrated BMS.
• Charging program selection by internal dip switch.
• Automatic weekly equalization for all charging programs 
• Thanks to the Winsta (Wago) and Phoenix contact connectors, wiring, and connections are easy and user-friendly.
• 3 completely isolated battery outputs.
• Manual Night Mode (Silent – fan turned off) by push-button is included with 12V-40A and 24V-20A
• Automatic 115/230V switch-over
• Touchview controller connection 

Specifications:

• Charger Input - Voltage: 110/220v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12v
• Charging Banks: 3
• Portable: No
• Box Dimensions: 5"H x 11"W x 13"L WT: 7.5 lbs
• UPC: 786142990507

Owner's Manual (pdf)

Samlex 80A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch  Lugs - Includes Temp Sensor [SEC-1280UL]

80A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor

This advanced fully automatic three-stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.

Features:

• Switch mode technology for high efficiency, lightweight and quiet operation
• Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
• Can charge 2 banks of batteries simultaneously, no isolator necessary
• Can be used as a power supply or DC UPS when used in conjunction with a battery
• User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
• User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
• “Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
• Voltmeter and Ammeter for monitoring
• Fan cooled based on output current
• Protections: Short circuit, overload, reverse battery connection and over temperature
• Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively

Specifications:

• Input: 120 VAC 60 Hz or 230 VAC 50 Hz
• Output: 12 VDC
• Amps: 80
• Remote Control: 900-RC
• Weight: 9 (lbs)
• Weight: 4.1 (kg)
• Dimensions: 15 x 9.61 x 3.82 (in)
• Dimensions: 381 x 244 x 97 (mm)
• Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
• Warranty: 2 Year Limited

Applications:

• Automotive
• Recreational vehicles
• Marine
• Communications sites
• Battery back-up systems

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Charger Output Voltage: 12v
• Charger Output - Amps: 80a
• Charging Banks: 2
• Portable: No
• Charger Input - Voltage: 120/240v
• Box Dimensions: 6"H x 11"W x 19"L WT: 14 lbs
• UPC: 622988083044

Owner's Manual (pdf)
Brochure (pdf)