Boat Outfitting

30 AMP SmartPlug/Twist Type Cordset w/Black Inlet Cover- 50'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.
• Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes.

Technical Specifications:

• Length - 50'
• Cordset Color - Orange
• Inlet Color - Black
• Boatside Connection - 30 AMP/125 V SmartPlug
• Dockside Connection - 30 AMP/125 V Twist Type Plug

In the Box:

• 50' Cordset
• Inlet cover
• Instruction manual

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Amperage: 30a
• Length: 50'
• Type: Cordset
• Voltage: 125v
• Box Dimensions: 5"H x 13"W x 14"L WT: 15.6 lbs
• UPC: 614458746191

Bennett BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12" [BOLT1212ED]

BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12" 

Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.

Kits Include:

• (2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000)
• (2) Stainless steel trim planes (tabs) and mounting plates
• (2) 20' wire harnesses with waterproof connectors (BAW2020)

Features:

• Requires less than 6.5" of vertical transom space to install
• Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence
• Controls sold separately 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 7"H x 14"W x 15"L WT: 22.6 lbs
• UPC: 666285600283

Turning Point Express Mach3 OS - Right Hand - Stainless Steel Propeller - OS-1617 - 3-Blade - 15.6" x 17 Pitch [31511710]

Express® Mach3™ OS™ - Right Hand - Stainless Steel Propeller - OS-1617 - 3-Blade - 15.6" x 17 Pitch

The Express® Mach3™ OS™ Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering. 

The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and larger 4.75" gearcase outboards from all engine manufacturers, and Mercury® Alpha One™ and Bravo One™, and Volvo® Penta® SX sterndrives. Large diameter three blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximize your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.

Proprietary Stainless Steel, TP17™

Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.

Large Free Flowing Exhaust Ports

Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.

Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Diameter (Inches): 15.6"
• Material: Stainless Steel
• Pitch: 17
• Rotation: Right
• Box Dimensions: 8"H x 16"W x 16"L WT: 18.4 lbs
• UPC: 652480206498

Quick Guide (pdf)
Brochure (pdf)

SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2

Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.

Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.

Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

Features:

• Horsepower: Single engine, 350hp, dual engine, 600hp
• Helm: 7.3 cu in/120cc
• Hose: 1,500psi
• Turns Lock-to-Lock: 4.3
• Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
• Steering Wheel: Sold separately
• Steering Wheel Shaft: 3/4" tapered
• Warranty: Two years

UFlex GoTech 1.0 Universal Front Mount Outboard Hydraulic Steering System [GOTECH 1.0]

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System

For outboard single engine up to 115hp.

Kit Contains:

• UP18 - Intermediate helm pump
• UC81-OBF - Front mount outboard cylinder
• OL 150 - Hydraulic oil - 2 litres
• KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length

Brochure (pdf)

Scanstrut APT6003 Aluminum PowerTower Open Array Radar Mount - 6" Aft Leaning [APT6003]

APT6003 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning 

Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. 

Compatible with:

• Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars
• Garmin - GMR 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, 404, 406, 424 xHD2, 624 xHDS2, 626 xHD2 radars
• JRC - JMA 2344 / 5106 / 5206 (4') and JMA 2344 / 5106 / 5206 (6') radars
• Navman - 8000 Series (8084/8120) 4" radars
• Onwa - KRA-3002/4001 radars
• Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3'/4'/6', Magnum 4' 4kW/12kW, Magnum 6' 4kW/12kW radars
• Simrad - HALO 3/4/6 Pulse radars
• Sitex - MDS - 10 (4'), 10 (5') and RADARpc - 3/54.5 radars

Features:

• Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad and Furuno
• Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower®
• Constructed from the best marine-grade aluminium
• Paint finishes complies with our unique 4 step marine paint system

Technical Specifications:

• Radar Type - Open Array
• Material - Aluminum 
• Height - 5.91" (150mm)
• Mounting Type - Aft leaning - 25°

In the Box:

• Mount
• Mounting hardware (excluding screws/bolts) 
• Installation manual

*Sold as an Individual 

Specifications:

• Construction: Aluminum
• Type: Aft Leaning Mount
• Height: 5.91
• Box Dimensions: 8"H x 13"W x 13"L WT: 6 lbs
• UPC: 5060114796447

Quick Guide (pdf)

740 IP Thru-Hull Camera

Features an IP Camera to allow complete control despite no moving parts. View on your PC, Laptop, Network Display, Cell Phone, or Tablet.

Control of the IP model is achieved in conjunction with Iris Centre camera management software, allowing digital pan, tilt, and zoom functionality and video recording, payback, and management. Iris Centre can handle multiple cameras and is available for download.

Features:

• Aluminum Bronze Bezel
• Hard Anodised Aluminum Housing
• IP68 Waterproof Aluminum Housing

Bennett BOLT 12x12 Electric Trim Tab System - Control Switch Required [BOLT1212]

BOLT 12x12 Electric Trim Tab System - Control Switch Required 

Electric Trim Tab Systems For Trailered Boats

Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.

Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.

While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:

• Trailered boats from 17-28 feet
• Single actuator use, due to the inability to synchronize two electric actuators on the same tab

Features:

• Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
• Robust, water-tight black nylon actuator provides trouble-free operation
• Main seal located high to protect against marine growth and water intrusion failures
• Quieter than any other system on the market - No more scaring the fish away!
• Installation is fast - no need to disassemble parts of the actuator
• Controls sold separately 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Actuator Type: Electro-Mechanical
• Box Dimensions: 7"H x 14"W x 15"L WT: 21 lbs

Owner's Manual (pdf)