Boat Outfitting

Kasper Tracker

Solar-Powered Global Satellite Asset Tracker.

Compact, solar-powered satellite tracker providing asset location, status, and global visibility in remote areas. Enables monitoring of equipment in harsh environments without built-in gear.

Features:

• Solar-powered with an integrated antenna for autonomous operation.
• Two-way global satellite communication via OGx.
• Sensors: 3-axis accelerometer, temperature, and BLE door sensor.
• Monitoring: Utilization, dwell, door alerts for security.
• Durable: IP67/IPX9K rated, shock/vibration resistant, HERO-certified.
• Easy installation and relocation across assets.
• Wireless BLE 5.2 connectivity.
• Global Satellite Connectivity
• Remote Asset Monitoring from Any Device
• Easy Attachment & Relocation
• Exceptional Durability
• Geo-Fence Protection Mode

Specifications:

• Dimensions:  8.8 x 3.0 x 1.1 in (224 x 76 x 28 mm)
• Material:  Polycarbonate, white
• Battery:  Li-ion, -30°C to 70°C operating, -40°C to 85°C storage
• Environmental:  IP67/IPX9K ingress, MIL-STD-810HG shock (40g), AAR-S-9401 vibration
• Positioning:  GPS, GLONASS, BeiDou, Galileo
• Certifications:  FCC/IC, CE RED, ATEX Zone 2, CID2, ROHS, WEEE, HERO
• Communication:  ORBCOMM OGx satellite, BLE 5.2 orbcomm.com

iBrid Nano II Polisher In Systainer Kit 120V 60Hz USA Plug

The iBrid Nano II represents the evolution of RUPES’ famous compact polisher, now even more powerful, versatile, and innovative. Featuring the exclusive SMARTFIX quick-release system, it allows easy, fast connection and disconnection of the functional units.

Thanks to the gear reduction system, the Nano II can operate in rotary mode up to 2000 RPM even with 50mm backing plates, ensuring consistent torque and superior control.

Ideal for precision work in tight spaces and defect removal, it is the perfect tool for polishing professionals who demand flexibility, reliability, and uncompromised performance in every situation.

Kit Includes:

• BigFoot iBrid Nano II polisher (HR81MLII)
• 2x Rechargeable power pack (9HB125LT)
• Charger (9HC120LT)
• Extension shaft for Nano II polisher (94mm length) (563.392/C)
• 4x D-A COARSE Wool polishing pads with velcro Ø50/65mm (2” - 2.5") (9.BW70H/4)
• 4x D-A FINE Foam polishing pads with velcro Ø50/70mm (2” - 3”) (9.DA70M/4)
• 4x D-A COARSE Wool polishing pads with velcro Ø35/45mm (1” - 1.5") (9.BW40H/4)
• 6x D-A FINE Foam polishing pads with velcro Ø30/40mm (1” - 1.5”) (9.DA40M/6)
• D-A COARSE polishing compound 250mL (9.DACOARSE250)
• D-A FINE polishing compound 250mL (9.DAFINE250)
• Rotary Functional Unit (562.392/C)
• 3mm orbit Functional Unit (581.392/C)
• 12mm orbit Functional Unit (58.392/C)
• Rotary gear reduction (564.392/C)
• Polishing backing pad Ø30mm (1”1/4) (995.001/C)
• Polishing backing pad Ø50mm (2”) (996.001/C)
• Sanding backing pad Ø30mm (1”1/4) (997.001/C)
• 10x Microfinish - Adhesive denibbing discs Ø 35mm P2000 (9.45DF2000/10)
• 10x Microfinish - Adhesive denibbing discs Ø 35mm P3000 (9.45DF3000/10)
• Blue Microfiber Cloth (9.BF9050)
• Yellow Microfiber Cloth (9.BF9060)
• Wrench key (9.1396/C)
• RUPES Systainer T - LOC (9.CASEIII)
• Systainer inlay (9.Z110)

Specifications:

• Type: Tools & Accessories
• Box Dimensions: 10"H x 12"W x 16"L WT: 12 lbs
• UPC: 8050246742877

PRO-2 2-Transducer Ultrasonic Antifouling System - 24VDC

The PRO-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 40ft in length or can be combined with additional systems for larger vessels. The PRO-2 can also be tasked with protecting drives and rudders.

The PRO-2 Package Includes:

• 1x PRO-2 Control Module with Integrated Power Cable
• 2x Submersible Ultrasonic Transducers with 15ft of Cable
• 1x Epoxy Kit
• 1x Printed Installation and Operation Manual

Specifications:

• Voltage: 24V DC
• Average Power Draw: 0.5Ah
• Transducer Strength: 120W
• Cable Length: 15ft per transducer
• Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)

Installation Overview:

• No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
• Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
• Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
• Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market.

How the Technology Works:

• The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
• Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
• Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
• Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.

Benefits:

• Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
• Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
• Diver Savings: Reduces the need for monthly hull cleaning services.
• Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
• Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.

4" Offshore Fixed-Height Helm Pedestal Package

Package includes heavy-duty 4″ Workhorse slide & swivel with anodized finish, fixed-height brite dip 4″ pedestal with 12″ round polished base. The Helmsman flip-up footrest flips up out of the way. Pedestal height 24″. Overall height 27-1/2″.

BPS-6 6-Transducer Ultrasonic Antifouling System - 12VDC

The BPS-6 is a six-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 65ft in length or can be combined with additional systems for larger vessels. The BPS-6 is also the perfect solution for vessels under 52' with pods or stern drives to have one system covering the entire vessel.

The BPS-6 Package Includes:

• 1x BPS-6 Control Module with Integrated Power Cable
• 6x Submersible Ultrasonic Transducers with 15ft of Cable
• 3x Additional 15ft Extension Cables
• 2x Epoxy Kits
• 1x Printed Installation and Operation Manual

Specifications:

• Voltage: 12V or 24V DC
• Average Power Draw: 1.5Ah
• Transducer Strength: 60W
• Cable Length: 15ft per transducer
• Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz)

Installation Overview:

• No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy.
• Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller.
• Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel.
• Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market.

How the Technology Works:

• The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance.
• Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach.
• Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations.
• Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans.

Benefits:

• Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed.
• Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs.
• Diver Savings: Reduces the need for monthly hull cleaning services.
• Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders.
• Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required.

Workhorse Air-Ride Slide & Swivel - 4"

10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels 6″ fore and aft. Flip handle for locking pin.

EVO Teal with Flex Suspension No Plinth

Lightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.

Affordable, comfortable, & safe suspension seats for boats

At Shark, it is all about you and your safety.  Our mission is to save your neck, back, knees, and ankles with the most comfortable suspension seating possible and save your budget at the same time.

Simplicity & Quality meet Hi-tech

The simple design, combined with hi-tech tooling and robotics, provides a consistent, quality result every time. This investment on our part ensures the best quality, price, and on-time delivery for you.  There is also nothing to rust, no coatings to peel, just high-tech UV-protected Flexanite™ with colour that is molded all the way through.

Peak Performance, Independently Tested

Regular suspension seats for boats, which use scissor action or telescopic designs, have crush points and aren’t able to match the 9″ range of motion and 3D protection in every direction unique to Shark Flex. This is handy because waves don’t just throw you up and down. With just one moving part, Flex is more reliable and easier to service than anything else out there. In fact, Flex has been tested to stringent Nato standards and easily survives 1 million test impacts at 10G.

Comfortable & Attractive

Shark suspension seats are more than just an ultra-light and robust gadget to save your back. They are comfortable and look great while doing it, too. Thanks to the elegant design and huge 225mm of vertical travel, your back is protected, even over the biggest waves.

Your comfort is important to us, which is why we have combined this large travel with our energy-absorbing foams to make it feel like you are riding on a cloud.

The saddle shape of the seat also keeps you anchored and feeling secure; you never feel like you will be thrown off, not even sideways. The seat pommel supports you sideways so securely that you can relax your arms and concentrate on more important things like controlling the boat or enjoying the ride.

Safe

Shark seats are made to last because your safety comes first.  This is why we test our suspensions 5 different ways (life tests, crash tests, drop tests, pull tests, and field trials) to make sure they stay tough when the seas are rough.

Our commitment to you is to provide a safer and more enjoyable boating experience and make that accessible to everyone, regardless of the size of your boat or budget, or where you are. Trust Shark and you will never look back.

Build your own suspension seat for your boat from A Shark FLEX suspension unit. You can select your seat type, choose from a range of base options, and add accessories to suit your requirements.

Specifications:

• Total weight: 18.5kg/40.8lbs
• Suspension travel: 225mm/9"
• Weight capacity: 120kg/265lbs

Specifications of the FLEX suspension unit:

• Simplicity: has only 3 unique parts
• Compatible with most third-party seats and attachments (including swivels) as well as Shark seats
• 225mm of progressive and ULTRA-SMOOTH travel
• Light: Only 9kg (20lb)
• 450mm overall height
• Compact: 300mm wide, 350mm deep
• Less fatigue: From 3-axis shock mitigation eliminates whiplash and takes stress off your body
• Non-corroding: soft-edged and non-marking, built with 316 stainless and Flexanite
• Super low maintenance
• Tested: 1 Million full 10g impacts
• Crash test rating: To HSC2000 Annex 10 requirements
• 3-year global manufacturer's warranty on all parts
• Independent tests reveal that Flex outperformed a well-known European brand
• Easy one-man installation
• Easily repairable: the shock can be replaced in under 2 minutes by one person
• Suspension can be bolted directly to your deck with 8 bolts (minimum)

3-Stage Table Pedestal Package

Package includes gas-powered adjustable high-strength aluminum table post with 12-1/2″ table mount and 12″ diameter floor base with 11″ bolt pattern for added stability-designed to provide maximum strength and support to your dining experience.