Boat Outfitting

100A Receptacle - 125/250V 

Spring loaded cover provides an IP67 watertight rating when tightened. 

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Type: Receptacles
• Box Dimensions: 6"H x 7"W x 8"L WT: 2.8 lbs
• UPC: 093344500503

100A Plug - 120/208V 

Marinco pin and sleeve in-line plugs feature non-metallic housings with locking rings and gaskets for watertight protection.

Features:

• 100A
• 3 phase Y 120/208
• 4 Pole 5-Wire

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Type: Plugs
• Box Dimensions: 5"H x 5"W x 15"L WT: 3.75 lbs
• UPC: 093344500909

Uflex SilverSteer Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1 [SILVERSTEER 1TB]

Ships Direct From Manufacturer 

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1

Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.

Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.

Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

SilverSteer™ Package Kit Contains:

• UC130/1-SVS Cylinder
• UP25F-SVS Helm
• 2 Quarts of Hydraulic Oil

Quick Guide (pdf)
Brochure (pdf)

Tigress Marine Electronics Box Heavy-Duty - Large - 30" x 17" x 11" [88653]

Marine Electronics Box Heavy-Duty - Large - 30" x 17" x 11"

This Tigress fiberglass box is perfect for storing electronics.

Features:

• Stainless lock
• 1/2″ thick – door & frame
• 1 gas shock

Specifications:

• Size (W x D x H): 30 x 17 x 11 inches

NavPod RMX4800-07 RailMount Pre-Cut f/Raymarine AXIOM 9 [RMX4800-07]

RMX4800-07 RailMount Pre-Cut for Raymarine AXIOM 9 

Features:

• Pre-Cut for Surface Mount Using Rear Mounting Brackets
• Requires Raymarine Right Angle Connector 
• Fits 1″ or 1.25″ Tubing

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Mounting Style: Rail
• Cut/Uncut: Cut
• Box Dimensions: 9"H x 13"W x 15"L WT: 7.8 lbs
• UPC: 659988116489

TACO Neptune Premium Leaning Post [L10-1001-1]

Ships Direct From Manufacturer 

Neptune Premium Leaning Post

Taco Marine's Neptune Premium Leaning Post is designed for up to 30' center console boats, backed by a 3-year warranty. The Neptune Premium Leaning Post is constructed of anodized Aluminum, engineered and built to last with a removable fiberglass storage tray for ease and convenience. It is also equipped with four flush-mounted Aluminum Rod Holders. The easy assembly makes this leaning post very popular with boat owners.
Footprint dimension: 15-1/2" x 35".

Features:

• Removable fiberglass storage tray
• Four flush-mounted Aluminum rod holders
• Folding foot rest
• Wrap around grab rail
• Durable Aluminum seat hinges
• 72qt cooler storage area with strap
• Cooler storage area: 24-1/2" H x 29-1/4" W
• Hand-laid fiberglass deck
• Aluminum frame, marine-grade pipe
• Hand-polished mirror finish and anodized after fabrication
• No painted welds or crazing around bends
• Continuous flat bar mounting pads
• Mildew, fungus and UV-resistant
• Easy assembly
• Footprint = 15-1/2" x 35"

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavPod RMX4900-09 RailMount f/Raymarine c95/c97 & e95/e97 (Fits 1" or 1.25" Tubing) [RMX4900-09]

RMX4900-09 RailMount for Raymarine c95/c97 & e95/e97 (Fits 1" or 1.25" Tubing)

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Nickel Chrome Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch charplotters.

Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These new NavPods are really strong!

Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel
We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

Commitment to Quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut
• Mounting Style: Rail
• UPC: 659988116830

NavPod RMX4800-13 RailMount Pre-Cut f/Simrad GO9/B&G Vulcan 9 [RMX4800-13]

RMX4800-13 RailMount Pre-Cut for Simrad GO9/B&G Vulcan 9

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

All RailMounts Include:

• Acrylic capped ABS plastic
  
• Chromed stainless steel tamper-proof fasteners
  
• Double Seal for watertight integrity
  
• Models are available pre-cut for popular electronics.
  
• Chromed stainless steel arm with swivel mount
  
• Two sets of adaptors included for 1" or 1.25" diameter tubing

The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped
ABS material. We use the absolute best UV resistant material that provides a
very high gloss white finish that matches gel-coated fiberglass. The Gen3
enhancements now include a thicker gauge material that improves strength and
1provides for better structural rigidity.

The Waterproof Seal
All NavPods are manufactured with a double gasket system providing
an excellent watertight seal between the front and back of the NavPod for
protection of your Marine Electronics. NavPods are made to withstand the
harshest of wet offshore boating conditions. Gen3 enhancements include a
thicker external silicone gasket with improved flush fit. The internal EPDM
gasket is now 50% thicker and is not subject to "compression set" like many
rubber compounds. This is important when you need to open the NavPod in the
future to service your electronics.

The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with
each NavPod. Large round head tamperproof screws have deeper sockets for the
NavPod wrench for better holding ability when tightening than the previous
screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof
screws for security combined with a little bling!

The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes
come into play. It all starts with the design and development of the
tooling. We are fortunate to have experienced in-house design engineers who
utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to
interface with our CNC machining centers to produce quality tools with
precision tolerances. We have re-designed and re-tooled all of the popular
NavPods. We have reviewed all of the former products and selected the best
design elements of each and incorporated them in every new Gen3
product.

Our Commitment to Quality
We are committed to producing the best possible waterproof housing
for Marine Electronics. Now with two decades of experience under our belt,
we are confident you will have years of trouble free service and a long
lasting high gloss finish. We will stand behind our commitment by now
offering a 10-year warranty on all new Gen3 NavPods.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Cut/Uncut: Cut