Boat Outfitting

Carver 00-09 Sea Ray 240 Sundeck I/O Sun-Dura - Black [10259S-2]

00-09 Sea Ray 240 Sundeck I/O Sun-Dura - Black

Looking to protect your boat with the best fitting cover available? Look no further. Carver custom boat covers are designed for the exact boat specified. After measuring the boat, covers are hand crafted by pattern makers knowledgeable in the way that a boat cover should fit. Made in the USA, these covers are built from the finest available marine-grade materials. 

Features:

• Color: Black

Veratron Fresh Water Level Sensor w/Sealing Kit #370 - 12-24V - 4-20mA - 1250-1500mm Length [N02-240-406]

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 1250-1500mm Length

Fresh Water Level Sensor (capacitive) with adjustable dip, sealing kit.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Veratron Fresh Water Level Sensor w/Sealing Kit #930 - 12/24V - 4-20mA - 600-1200mm Length [N02-240-904]

Fresh Water Level Sensor with Sealing Kit #930 - 12/24V - 4-20mA - 600-1200mm Length

Fresh Water Level Sensor (capacitive) with adjustable dip, sealing kit N05-016-930.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

VETUS BOW PRO 761 Bow Thruster 76KGF - 12V [BOWA0761]

Ships Direct From Manufacturer 

BOW PRO 761 Bow Thruster 76KGF - 12V

The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!

The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.

Features:

• Range of Boat Size: 35ft - 39ft
• Thrust in pounds force: 167 lbs
• Motor horse power: 6
• Tunnel- center line below the waterline: 185MM
• Voltage: 24V
•  Precision proportional control
• Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power
• Maintenance-free brushless motor
• Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments
• Built-in over-temp and low battery voltage protection
• Suitable for high demanding applications (e.g. for use in rental & charter vessels)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Veratron NavBox Electronic Control Unit [A2C59501979]

NavBox Electronic Control Unit

The AcquaLink® NavBox is the core of the AcquaLink® VDO Marine system. It acts as a CPU and signal interface. The NavBox provides a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000®) or one analog engine. It also features two VDO Marine Sumlog® paddle wheel sensor and one analog VDO Marine Windsensor connections, so legacy VDO Marine products can be used and brought to the digital age. 

NavSensor reads following analog data: 

• Engine Oil Pressure 
• Engine Oil Temperature 
• Engine Coolant Temperature 
• Transmission Oil Pressure 
• Fresh Water, Waste Water and Fuel Level 
• Voltage 
• Rudder Angle 
• Engine Frequency 
• Battery Current 
• Pyrometer 

It also features a NMEA 0183 input and output port as well as a buzzer output. All received data are converted and sent to the NMEA 2000® network and to the VDO Marine Bus. This gateway function allows displaying engine, liquid level, pressure, temperature and other vital information on any compatible display on the NMEA 2000® network or on designed VDO Marine AcquaLink® gauges or TFT Displays. 

The configuration of the NavBox can be done by using an AcquaLink® TFT and NavControl or by using the intuitive VDO Marine diagnostic tool.

• Reverse polarity protection 
• NMEA 2000® certified 
• LED signal status indication 
• Aluminum base plate 
• Front & rear side protection rating IPX4 
• 3x VDO Marine bus lines 
• 1x J1939 CAN bus 
• 1x NMEA 2000® bus 
• 1x VDO Marine Analog Wind Sensor Input 
• 2x VDO Marine Sumlog® Inputs 
• AMP Super Seal power input 
• 26 pin AUX input (analog signals, NMEA 0183) 
• Operating temperature range -20°C/+70°C

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SmartPlug SmartPlug/15 AMP Cordset - 50 [C15503]

SmaetPlug/15 AMP Cordset - 50'

This 30 AMP Female SmartPlug to 15 AMP Male Standard Wall Plug (3-pin connector) cordset comes with a Cool Blue LED Power indicator light that glows when power is on.  This cord set provides a super flexible cord that can be tightly coiled even in cold weather. 

Features:

• Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from the movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.

Technical Specifications:

• Length - 50'
• Color - Orange
• Boatside Connection - 30 AMP/115 V Female SmartPlug
• Dockside Connection - 15 AMP/115 V Male Standard Wall Plug

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Voltage: 115v
• Type: Cordset
• Length: 50'
• Amperage: 30/15a
• Box Dimensions: 6"H x 13"W x 13"L WT: 13.8 lbs
• UPC: 682500440076

Owner's Manual (pdf)

VETUS BOW PRO 651 Bow Thruster 65KGF - 12V [BOWA0651]

Ships Direct From Manufacturer 

BOW PRO 651 Bow Thruster 65KGF - 12V

Our BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!

The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.

Features:

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Taylor Made Center Console Electronics Box [83558]

Center Console Electronics Box

The fiberglass Electronics Box by Taylor Made sports an RTM molded design with a large interior for a variety of storage options. Looking for more storage on your center console? We've got you covered. The 27" x 26" box allows for plenty of room for all your electronics and many other items that need to be stored away from the elements.

Features:

• RTM molded fiberglass design
• Uniform wall and smooth interior gives a cleaner finish
• Large interior space for multiple electronic devices
• Easy open front latch with weather protecting seals
• Lockable door for added security while under way
• Size: 27"W x 26"D x 10"T