Boat Outfitting

Riptide Terrova® QUEST™ 90/115 Trolling Motor with Wireless Remote - 24/36V - 90/115LBS - 87" - Black

Riptide Terrova is the hardest-working first mate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term "day off". With available shaft lengths up to 100", Riptide Terrova comes ready to go where other trolling motors won't. The QUEST series of dual 24/36 volt brushless trolling motors were designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before.

QUEST Series

This 24/36V dual-voltage brushless motor has been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors, and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.

Stow/Deploy Lever

Press this lever on the mount, and fall-away ramps will effortlessly slide your trolling motor into the water. When you're ready to move, Auto Park helps the motor stow effortlessly by orienting the lower unit to the perfect stow position automatically.

Advanced GPS Trolling System

The most trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.

Part of the One-Boat Network

Out of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated set-up procedures.

Spot-Lock with Jog

Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. 

Drift Mode

Automatically engages speed and course control simultaneously, meaning anglers no longer need to depend on drift socks, kicker motors, or manual operation to control speed over water – even in the heaviest wind and current.

Real-time Battery Monitoring

Check battery power levels while the motor is in use, real-time "time until empty" display monitor, with a notification when battery power is reduced to 20% to prompt users to enter "Eco-mode" which can reduce current draw to extend battery life.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. This variable-speed trolling motor lets users dial in the exact speed, and they deliver only as much power as they need, helping to conserve your battery for a full day of fishing.

Indestructible Composite Shaft — Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.

Mobile App Compatibility

Control your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.

Specifications:

• Trolling Motor Color: Black
• For Use In: Saltwater
• Shaft Length: 87"
• Voltage: 24/36
• One-Boat Network Compatible: Yes
• QUEST Series: Yes
• Spot-Lock: Yes
• Foot Pedal Style: Not included
• Control: Wireless remote
• Auto/Stow Deploy: No
• Power Trim: No
• Power Steering: Yes
• Lift-Assist: No
• Bowguard: No
• Wireless Remote: Yes
• AutoPilot: Yes
• CoPilot: No
• Speeds: Variable
• Digital Maximizer: Yes
• Battery Meter: Yes
• Max Amp Draw: 58
• Mount Style: Bolt-On
• Mounting Location: Bow-mount
• Motor Style: Electric-steer
• Prop: Power Prop (MKP-40)
• Warranty: Two-year warranty

Specifications:

• Autopilot: Yes
• Built-In Transducer: No
• Control Type: Wireless Remote
• Mounting Style: Bow
• Salt Water/Fresh Water: Salt
• Series: Riptide Terrova
• Shaft Length (Inches): 87"
• Thrust (Pounds): 90/115 lbs
• Voltage - Input Range (Volts): 24v or 36v
• Box Dimensions: 15"H x 18"W x 104"L WT: 104 lbs
• UPC: 029402052981

TACO Caladesi Smooth Bucket Seat - Grey/Black [BA2-25GRY-BLK]

Ships Direct From Manufacturer

Caladesi Smooth Bucket Seat - Grey/Black

The Caladesi Bucket Seat—the perfect combination of comfort, durability, functionality, and style. Longer boat rides in the Caladesi Bucket Seat are instantly more enjoyable because of its state-of-the-art design with an integrated seat suspension—a corrosion-proof, stainless-steel, coil-spring suspension grid system integrated into the injection-molded seat bottom. 

The Caladesi Bucket Seat also features plush cushioning, a wrap-around body style accented with a smooth fabric finish, and a sporty back cutout that allows for breathability and flair. This bucket seat also features an adjustable bolster, allowing boaters to stand and steer when at the helm. This premium-quality bucket seat features high-density, anti-bacterial foam padding and marine-grade vinyl fabric treated with anti-microbial and UV stabilizers. Made in Largo, Florida, USA, TACO is proud to offer a 3-year limited warranty on the Caladesi Bucket Seat, giving boaters the confidence, that’s needed on the water.

Features:

• Ideal for pilot houseboats, pontoons, and dual consoles
• Features integrated seat suspension for enhanced comfort
• Rotomolded seat shell construction with a reinforced seat bottom
• Adjustable bolster
• Premium-quality, marine-grade vinyl fabric treated with anti-microbial and UV stabilizers
• Plush, anti-bacterial foam padding, which provides durable support and protection from mold and mildew
• Form-fitting sides keep you comfortable
• Flexible, contemporary design
• Meets ABYC H-31 impact test
• Available in four different color combinations
• Mounts to any standard pedestal with a 5.25" 4-hole pattern
• Made in the USA
• 3-year limited warranty

Specifications:

• Color: Black & Grey
• Width: 23 in.
• Depth: 26 in.
• Height: 22 in.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Brochure (pdf)

VETUS V-CAN Wireless Remote Controller f/V-CAN Thrusters  BOW PRO [CANVWRC]

V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO

This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements.

Features:

• For V-CAN Thrusters and BOW PRO models
• Connectors for two thrusters (4 channels)
• Open-air range is up to 10m
• Maximum range is up to 25m when unimpeded

Specifications:

Remote Control 

• Power supply 3 VDC CR2032 (1x) 
• Protection Class: IP66 
• Frequency: 433.92 Hz 
• Temperature Range: 0°C - 70°C (+32°F - 158°F) 
• Weight: 50 g (2 oz)

Receiver 

• Power Supply: 8 VDC to 30 VDC 
• Maximum Current (per output): 8 A (at 30 Volts DC) 
• Protection Class: IP40 
• Frequency: 433.92 Hz 
• Temperature Range: 0°C - 70°C (+32°F - 158°F) 
• Weight: 800 g (28 oz)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Lectrotab XKA Stainless Steel Trim Tab Kit w/Rocker Switch - 9 x 24 [XKAF9X24]

XKA Stainless Steel Trim Tab Kit with Rocker Switch - 9 x 24

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking.  Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications:

• Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm)
• Boat Length - 24' to 37' (7 to 11 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
• Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
• Rocker Switch Operating Voltage - 12 or 24 V

In the Box:

• One (1) Flat Rocker Switch
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel

Owner's Manual (pdf)
Brochure (pdf)

TACO Boca Sport Chair [HA4-25WHA-7-0000-0-0]

Ships Direct From Manufacturer 

Boca Sport Chair

Introducing the innovative Boca Sport Chair – designed to provide the ultimate support and comfort for longer, faster boat rides. Anglers and boaters love this boat seat. With adjustable armrest brackets and rollback seat bolster, the Boca Sport Chair doubles as a leaning post! The Boca Sport Chair is made from premium quality, marine-grade vinyl fabric treated with anti-microbial and UV stabilizers. It comes with plush, anti-bacterial foam padding, which provides durable support and protection from mold and mildew. Its form-fitted sides are designed to keep boaters comfortable for long trips at the helm.

Features and Benefits:

• Premium quality, marine-grade vinyl fabric treated with anti-microbial and UV stabilizers
• Plush, anti-bacterial foam padding, which provides durable support and protection from mold and mildew
• Form-fitting sides keep you comfortable
• Flexible, contemporary design
• Meets ABYC H-31 impact test
• Powder-coated armrest brackets
• Powder-coated, roll-back seat hinge with recessed hinge for protection
• Roll-back seat bolster allows quick repositioning
• Ideal for up to 30 ft. boats
• Includes foldable armrests and adjustable bolster
• Made in the USA
• 3-year limited warranty

Specifications:

• Width Excluding Arm Rests (inch): 20”
• Width Including Arm Rests (inch): 24-5/8"
• Front of Chair to the Back of the Chair (inch): 23”
• Height From the Bottom of the chair to the Top (inch) 25”
• Cushion Thickness of the bottom of the Chair (inch): 6”

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Raritan Icerette Automatic Ice Cube Maker - Stainless Steel - 230V [88B515-2]

Ships Direct From Manufacturer

Icerette Automatic Ice Cube Maker - Stainless Steel - 230V

The marine environment is harsh for household-type appliances. Keeping that harshness in mind, Raritan developed and designed our ice maker so that it would withstand the vigor of any marine environment. Fully automatic ice-making machine specifically designed and built for marine applications

Features:

• Heavy-duty solid stainless steel cabinet and door built to last in harsh marine environments
• Improved controls for more efficient operation
• Corrosion-resistant marine-grade hardware, hinges, fittings, and fasteners
• A positive catch door latch keeps the door closed and allows maximum ice production while keeping harmful bacteria and molds out
• Built-in door prop lets you manually defrost or air-dry your unit when power is off
• Produces up to 21 lbs of ice every day using only 2-3/4 gallons of water
• Stores of up to 11 lbs of crescent ice (1/2" W x 3/4" H x 2-1/2" L)
• Each unit is assembled by hand and individually tested
• Back by Raritan's 1-Year Limited Warranty and legendary technical support team

Easy Installation:

• No drain is required makes it easy and inexpensive to install
• Only requires a 1/4" outside diameter water line
• Does not require additional hinge clearance for the door swing
• Includes flange
• No additional side space is required for ventilation

Technical Specifications:

• Voltage Range - 220V - 240V
• Water Pressure Operating Range (PSI) - 20 - 120  
• Cutout Dimensions - 14 3/8” W x 24 5/8” H x 16 1/4” D
• Ice Production Capacity - 21lbs/24 hrs 
• Ice Storage Capacity - 11lbs removable ice bucket

Quick Guide (pdf)
Owner's Manual (pdf)

Veratron 85mm (3-3/8") VMH-35S Multifunction Gauge w/Voltage Dependent (0-5V) Sensor Input  Battery Sensor [B00143502]

85mm (3-3/8") VMH-35S Multifunction Gauge with Voltage Dependent (0-5V) Sensor Input & Battery Sensor

The first in its new VMH line of premium marine gauges, the Veratron VMH 35-S was engineered for single inboard or outboard engine applications. The elegant black-glass design displays a wealth of critical boat system data, in a compact package that's perfect for dashboards, consoles, and bulkheads on smaller vessels with limited space.

The Veratron VMH 35-S has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters. This saves the need for an additional external converter. Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines. An integrated GPS makes the VMH 35-S the perfect standalone navigation solution. It integrates speed, compass, and position into the engine data information. A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities.

The Veratron VMH 35-S has a mineral glass front that's optically bonded to the sun-readable hybrid display. A sleek brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors. Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back. It fits a standard 85mm (3-3/8’’) panel cutout size.

Powered by the latest microprocessor, the Veratron VMH 35-S is blazingly fast. Yet even when set at full brightness, it draws a mere 170mA of power—a fraction of what a comparably-sized TFT screen uses.

The VMH 35-S has the capacity to provide 30 types of data including engine, EcoMode pop-up screen, RPMs up to 8'000 with a programmable overspeed alarm, tank levels, battery status, GPS, and vessel information. It's easily configured using the embedded on-screen menu and soft-touch buttons.

Features:

• Integrated high-performance GNSS receiver
  • Intelligent Battery Sensor (IBS) port
• Analog inputs: 1x 0-5V / 1x resistive / 1x frequency
• Stylish black-glass design with brushed stainless-steel ring
• Front ring: Brushed stainless steel
• Front lens: Mineral glass
• Display: Color IBN + 1.44" TFT optically bonded
• Connectors: Molex MX-150 12 pins / DeviceNet M12 5 pins
  • NMEA 2000 certified with embedded analog gateway

Technical Specifications:

• Nominal voltage: 12V
• Operating voltage: 9-16V
• Current consumption: ≤ 150 mA (normal mode)
• Protection class: IP X7
• Dimensions: 100 mm (outer) and 85 mm (mounting hole)
  • Cable lengths: 6m

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Box Set: No
• Gauge Size: 3-3/8"
• Gauge Type: Multifunction
• Series: VMH
• Voltage - Input Range (Volts): 12v
• Box Dimensions: 5"H x 10"W x 14"L WT: 2.8 lbs
• UPC: 7640190290435

Quick Guide (pdf)
Owner's Manual (pdf)

TACO 13-1/8" x 36" Electric Seat Slide [M20-3613E]

Ships Direct From Manufacturer 

13-1/8" x 36" Electric Seat Slide

Perfect for seats 41" to 54" wide, this 13-1/8" X 36" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information.

Features:

• Ideal for seats 41" to 54"
• Features 5" of travel distance (stroke length)
• Meets H31 testing standards for seat applications
• Precision-machined 6000-series aluminum chassis
• Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant 
• Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
• Quite an operation ≤ 58dB
• Electric actuator
• Self-locking at any given position (at rated loads)
• No racking in any direction due to precision tolerances in the track/glide system
• All electric seat slides and components are acid-etched clear anodized
• Made in the USA 
• 3-year limited warranty

Specifications:

• 12V DC 9 AMP Max current
• Max load 3500N
• Push and pull force of 1500N
• IP66 Rated 
• Speed 13.5 mm/Sec @ 1500N

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Brochure (pdf)