Boat Outfitting

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 18 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
• Boat Length - 20' to 40' (6 to 12 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit 

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 2"H x 4"W x 6"L WT: 27.05 lbs

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 12 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications:

• Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm)
• Boat Length - 18' to 32' (5.5 to 9.5 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 2"H x 4"W x 6"L WT: 19.25 lbs

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 24 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm)
• Boat Length - 24' to 37' (7 to 11 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 2"H x 4"W x 6"L WT: 27.45 lbs

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M1

This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS).

Riptide PowerDrive™ 70 Trolling Motor with Wireless Remote - 24V - 70LB - 54"

Riptide PowerDrive has been counted on for years by saltwater anglers who want reliable performance with smart boat control features. With a tough, sleek mount and an arsenal of reliable innovations, it's not tough to see why. Nobody outworks a Riptide.

Deploy-Assist Lever

Get in and out of the water easily. Just depress the lever to deploy your trolling motor, and when it's time to move, it stows easily and securely.

Advanced GPS Trolling System

The most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from Powerdrive's simple and straight-forward micro remote.

Push-to-Test Battery Meter

Press a button to get an instant "stage of charge" reading.

Advanced Corrosion Protection

Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.

Power Prop

Delivers extra power to push through any fishing scenario and excels in open water.

Indestructible Composite Shaft — Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.

Cool, Quiet Power

Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.

What's Included

One-Boat Network Enabled Riptide PowerDrive 70 lb. 54" Motor, Wireless Remote, Lanyard, MKP-37 Prop and Mounting Hardware

Specifications:

• For Use In: Saltwater
• Shaft Length: 54"
• Voltage: 24
• One-Boat Network Compatible: Yes
• QUEST Series: No
• Spot-Lock: Yes
• Built-In Sonar: None
• Foot Pedal Style: Not included
• Control: Wireless Remote
• Auto/Stow Deploy: No
• Power Trim: No
• Power Steering: Yes
• Lift-Assist: No
• Bowguard: No
• Wireless Remote: Yes
• i-Pilot Link (GPS): No
• i-Pilot (GPS): No
• AutoPilot: Yes
• CoPilot: No
• Speeds: Variable
• Digital Maximizer: Yes
• Battery Meter: Yes
• Max Amp Draw: 42
• Mount Style: Bolt-On
• Mounting Location: Bow-Mount
• Motor Style: Electric-steer
• Prop: Power Prop (MKP-37)
• Warranty: Two-Year Warranty

Specifications:

• Built-In Transducer: No
• Control Type: Wireless Remote
• Included Propeller: MKP-37
• Mounting Style: Bow
• Salt Water/Fresh Water: Salt
• Series: Riptide PowerDrive
• Shaft Length (Inches): 54"
• Thrust (Pounds): 70 lbs
• Voltage - Input Range (Volts): 24v
• Box Dimensions: 11"H x 17"W x 69"L WT: 46 lbs
• UPC: 029402051076

Riptide Terrova® QUEST™ 90/115 Trolling Motor with Wireless Remote - 24/36V - 90/115LBS - 100"

Riptide Terrova is the hardest working firstmate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term "day off". With available shaft lengths up to 100", Riptide Terrova comes ready to go where other trolling motors won't. The QUEST series of dual 24/36 volt brushless trolling motors were designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever, and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before.

QUEST Series

These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors, and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.

Stow/Deploy Lever

Press this lever on the mount, and fall-away ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Auto Park helps the motor stow effortlessly by orienting the lower unit to the perfect stow position automatically.

Advanced GPS Trolling System

The most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.

Part of the One-Boat Network

Out of the box, Minn Kota motors come standard with everything you need to connect to select Humminbird fish finders, unlocking more advanced navigation features without needing to remember additional adapters or complicated set-up procedures.

Spot-Lock with Jog

Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. 

Drift Mode

automatically engages speed and course control simultaneously, meaning anglers no longer need to depend on drift socks, kicker motors, or manual operation to control speed over water – even in the heaviest wind and current.

Real-time Battery Monitoring

Check battery power levels while the motor is in use, real-time "time until empty" display monitor, with a notification when battery power is reduced to 20% to prompt users to enter "Eco-mode" which can reduce current draw to extend battery life.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.

Indestructible Composite Shaft — Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.

Mobile App Compatibility

Control your motor directly from your Apple® or Android™ device with the One-Boat Network app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.

Specifications:

• For Use In: Saltwater
• Shaft Length: 100"
• Voltage: 24/36
• One-Boat Network Compatible: Yes
• QUEST Series: Yes
• Spot-Lock: Yes
• Foot Pedal Style: Not included
• Control: Wireless remote
• Auto/Stow Deploy: No
• Power Trim: No
• Power Steering: Yes
• Lift-Assist: No
• Bowguard: No
• Wireless Remote: Yes
• AutoPilot: Yes
• CoPilot: No
• Speeds: Variable
• Digital Maximizer: Yes
• Battery Meter: Yes
• Max Amp Draw: 58
• Mount Style: Bolt-On
• Mounting Location: Bow-mount
• Motor Style: Electric-steer
• Prop: Power Prop (MKP-40)
• Warranty: Two-year warranty

Specifications:

• Built-In Transducer: No
• Control Type: Wireless Remote
• Included Propeller: MKP-40
• Mounting Style: Bow
• Salt Water/Fresh Water: Salt
• Series: Riptide Terrova
• Shaft Length (Inches): 100"
• Thrust (Pounds): 90/115 lbs
• Voltage - Input Range (Volts): 24v or 36v
• Box Dimensions: 15"H x 19"W x 118"L WT: 110 lbs
• UPC: 029402050932

Riptide Terrova® 80 Trolling Motor with Wireless Remote - 24V - 80LB - 54"

What makes Riptide Terrova® so popular in Saltwater? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.

Advanced GPS Trolling System

The most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.

Spot-Lock with Jog

Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.

AutoPilot™

Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves, and current.

Push-to-Test Battery Meter

Press a button on the trolling motor head to get an instant status of how much battery life you have left.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.

Weedless Wedge™ 2 Prop

With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.

Indestructible Composite Shaft — Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.

Mobile App Compatibility

Control Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.

Advanced Corrosion Protection

Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder-coated paint provides the ultimate protection.

What's Included

Riptide Terrova 80 lb. 54" motor, Wireless Remote, Lanyard, Heading Sensor, MKP-33 Prop and Mounting Hardware

Specifications:

• For Use In: Saltwater
• Shaft Length: 54"
• Voltage: 24
• One-Boat Network Compatible: Yes
• QUEST Series: No
• Spot-Lock: Yes
• Built-In Sonar: None
• Foot Pedal Style: Not included
• Control: Wireless remote
• Auto/Stow Deploy: No
• Power Trim: No
• Power Steering: Yes
• Lift-Assist: No
• Bowguard: No
• Wireless Remote: Yes
• i-Pilot Link (GPS): No
• i-Pilot (GPS): No
• AutoPilot: No
• CoPilot: No
• Speeds: Variable
• Digital Maximizer: Yes
• Battery Meter: Yes
• Max Amp Draw: 56
• Mount Style: Bolt-On
• Mounting Location: Bow-mount
• Motor Style: Electric-steer
• Prop: Weedless Wedge 2 (MKP-33)
• Warranty: Two-year warranty

Specifications:

• Built-In Transducer: No
• Control Type: Wireless Remote
• Included Propeller: MKP-33
• Mounting Style: Bow
• Salt Water/Fresh Water: Salt
• Series: Riptide Terrova
• Shaft Length (Inches): 54"
• Thrust (Pounds): 80 lbs
• Voltage - Input Range (Volts): 24v
• Box Dimensions: 10"H x 16"W x 68"L WT: 52.5 lbs
• UPC: 029402050765

Fortrex 80 Trolling Motor - Dual Spectrum CHIRP - 24V - 80LB - 52"

Go ahead, make its day. Fortrex® is fearless, with a ruthlessly tough anodized aluminum mount, Mono-Arm Design, and 80 pounds of thrust. It tears through anything in its path — from thick weeds to stump fields — to deliver you to the fish.

Lift-Assist Mount

The patented Lift-Assist Design cuts the weight of the stow and deploy in half. Features a stainless steel, nitrogen gas-charged spring.

Removable Bowguard 360°® Bracket

Breaks away on impact from any angle and automatically resets itself, giving uninterrupted fishing. Plus, its dual-bearing system eliminates noise, and the entire mount is easily removable.

Mono-Arm Design

Made of extruded, anodized aluminum with a solid one-piece construction that helps the trolling motor run quieter with less wear for a longer life.

Built-In Dual Spectrum Chirp Sonar

Keeps the transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate and detailed returns of fish, structure, and bottom than traditional sonar.

Counter-Tension Stabilizer

An integrated spring in this mount applies force, whether the trolling motor is stowed or deployed. That translates to a trolling motor with no play, no give, reduced steering torque, and years of silent operation.

Illuminated Directional Indicator

Easy-to-read illuminated directional indicator built right into the motor head tells users the intended direction in any condition.

Heel-Toe / Cable-Steer Foot Pedal

Get heel/toe control of the motor with this ultra-responsive foot pedal that includes speed control and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability.

Push-to-Test Battery Meter

Press a button on the trolling motor head to get an instant status of the battery life you have left.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let users dial in the exact speed, delivering only as much power as is needed, helping to conserve your battery for a full day of fishing.

Weedless Wedge™ 2 Prop

With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.

Indestructible Composite Shaft—Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and Minn Kota guarantees it for life.

Cool, Quiet Power

Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.

What's Included

Fortrex 80 lb. 52" foot control trolling motor, MKP-38, hold-down strap, stabilizer, and mounting hardware

Specifications:

• For Use In: Freshwater
• Shaft Length: 52"
• Max Thrust: 80 lbs.
• Voltage: 24v
• One-Boat Network Compatible: No
• QUEST Series: No
• Spot-Lock: No
• Built-In Sonar: Dual Spectrum CHIRP
• Foot Pedal Style: Heel-toe / cable
• Control: Foot pedal
• Auto/Stow Deploy: No
• Power Trim: No
• Power Steering: No
• Lift-Assist: Yes
• Bowguard: Yes
• Wireless Remote: No
• AutoPilot: No
• Speeds: Variable
• Digital Maximizer: Yes
• Battery Meter: No
• Max Amp Draw: 56
• Mount Style: Mono-arm
• Mounting Location: Bow-mount
• Motor Style: Cable-steer
• Prop: Weedless Wedge 2 (MKP-33)
• Warranty: Two-Year Warranty

Specifications:

• Autopilot: No
• Built-In Transducer: No
• Control Type: Foot Control
• Mounting Style: Bow
• Salt Water/Fresh Water: Fresh
• Series: Fortrex
• Shaft Length (Inches): 52"
• Thrust (Pounds): 80 lbs
• Voltage - Input Range (Volts): 24v
• Box Dimensions: 9"H x 20"W x 67"L WT: 73 lbs
• UPC: 029402052790