14 products
Sort by:
14 products
T5 Through Tilt Tube Electro Steer - Saltwater
T5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.
Mounting hardware included. Controlled by a 2 button handheld remote with a 24′ cable. (See optional wireless remote 55-0105).
Panther T5 Through Tilt Tube Electro Steer - Saltwater - No Electronics [550503NE]
T5 Through Tilt Tube Electro Steer - Saltwater - No Electronics
T5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.
Mounting hardware included
*The NE option has NO ELECTRONICS to be used with a Trollmaster. Please see item 550503 for Electro Steer with Electronics.
Power Pole Cover f/Pro Series & Sportsman 8' Models Only
Power Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.
GS-2-50 Grounding Strap - 2" x 50'
This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.
Features:
- Flexible (easily conforms to vessel contours)
- .01 in. (25mm) thick
Specifications:
- Width (in./cm): 2/5.1
- Length (ft./m): 50/17
- Weight (lbs/kg): 5/2.3
VETUS V-CAN Wireless Remote Controller f/V-CAN Thrusters BOW PRO [CANVWRC]
V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO
This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements.
Features:
- For V-CAN Thrusters and BOW PRO models
- Connectors for two thrusters (4 channels)
- Open-air range is up to 10m
- Maximum range is up to 25m when unimpeded
Specifications:
Remote Control
- Power supply 3 VDC CR2032 (1x)
- Protection Class: IP66
- Frequency: 433.92 Hz
- Temperature Range: 0°C - 70°C (+32°F - 158°F)
- Weight: 50 g (2 oz)
Receiver
- Power Supply: 8 VDC to 30 VDC
- Maximum Current (per output): 8 A (at 30 Volts DC)
- Protection Class: IP40
- Frequency: 433.92 Hz
- Temperature Range: 0°C - 70°C (+32°F - 158°F)
- Weight: 800 g (28 oz)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Fat Seat Ballast Bag - 1,250Lbs - Gray
The FATSAC Fat Seat Sac is designed to add a massive amount of weight to direct drive boats that have a removable rear seat.
The FATSAC Fat Seat Sac is designed for inboard boats that have a removable rear seat. The Fat Seat is huge and it's strong enough to sit and walk on. It has two arms that extend forward on either side of the engine compartment to add even more weight to the stern of the boat.
Unlike the more versatile, but smaller Rear Seat Sac, the Fat Seat is designed for one location in direct drive boats, but it does deliver over 1,2500lbs. of wake shaping ballast. Remember that it's important to weight the boat evenly to maintain proper handling and to get the best wake, so you'll definitely need to add some ballast to the front of the boat if you're going to use the Fat Seat Sac.
Features:
- 1,525 lbs
- Body- 26" x 63" x 13" and Arms- 58" x 13" x 13"
In the Box:
- Ballast Bag x 2
- Six Valves/Caps (W731 x 4, W749 x 1 and W730 x 1)
Specifications:
- Type: Ballast Bags
- Box Dimensions: 7"H x 12"W x 18"L WT: 15.25 lbs
- UPC: 817177020836
Brochure (pdf)
Tigress Marine Electronics Box Heavy-Duty - Large - 30" x 17" x 11" [88653]
Tigress Marine Electronics Box Heavy-Duty - Large - 30" x 17" x 11" [88653]
Marine Electronics Box Heavy-Duty - Large - 30" x 17" x 11"
This Tigress fiberglass box is perfect for storing electronics.
Features:
- Stainless lock
- 1/2″ thick – door & frame
- 1 gas shock
Specifications:
- Size (W x D x H): 30 x 17 x 11 inches
Perko Chrome Plated Bronze Fog Bell - 6" [0420006CHR]
Fog Bell
(0420)
- Cast Bronze
- Chrome Plated
- Medium Weight
- Removable
This bell has been reviewed by the U.S. Coast Guard and comply with C.G. 169 Regulations for Sound Signal Appliances as required by Annex III Paragraph 2 of the '72 Colregs.
This bell is for use on vessels under 20 meters (65.6 ft.) in length.
Bottom Diameter: 6"
Height Overall: 5"
Showing 8/14
Next