4434 products
Sort by:
4434 products
Plashlight MINI LED Neon Flex - Cool White - 12V
Add some dot-free lighting to your living area, business, boat, and more with PlashLights' Neon Mini Flex!
All lengths come with 9ft of insulated power wire from one end
FEATURES:
- All-In-One Solution for Dot-Free Linear Lighting
- 319 Lm/M
- 10W / M
- 120 LED/M
- Cool White (5500K range)
- IP68 Rated Waterproof
- Available in 12V or 24V
- Emits Light From 3 Sides with Small Bending Diameter.
- Extremely Durable Top Bend
- Polyurethane Coating
- 165° Viewing Angle
- 50,000 Hours Expected Lifetime
- VHF and AIS Safe
- Chemical Rated
- UV and Saltwater Protected
- Available in Different Lengths Depending on Wattage
NOTES:
- Vertical Bending. The light comes out of the top 3 sides. With light coming out of 3 sides it makes this light practical for many applications.
- Recommended installation for a boat is fully embedded in marine RTV silicone. You do not want it moving as over time something will break. Fully embedded in sealant and it will last 10+ years. The clips are fine for applications where there is no vibration or movement.
SPECIFICATIONS:
DIMENSIONS:
Plashlight 40W Flush Mounted LED Lights - White Housing
PlashLights 40W marine white housing flush mounted lights are our best and brightest of our flush mount lights. Not only are they the brightest but they are also our most durable of the flush mount lights. This makes them perfect for off-road, powersports, and anywhere flush mount lighting is needed.
FEATURES:
- 10W CREE® LEDS
- Available in Spot, Flood, or Diffused beam
- 5,200 Lumens (each light)
- 9-36 Volt DC
- IP68 rated
- Extruded aluminum body with DuPont® coating
- Durable scratch resistant high impact polycarbonate lens
- 96% optical/reflector efficiency
- Genuine Gore® waterproof membrane with mechanical seal
- Deutsch® waterproof connectors
- Over / Under and reverse polarity protection
- Protected against electromagnetic (EMC) and radio frequency interference (RFI)
- LED Lifespan: 50,000 hours or 5 years of continuous use
- Operating Temp: -40°F ~ +145°F
- 316 Stainless Steel hardware and fasteners with nylon locking nuts
- 8.6g vibration compliant
- CE and RoHS certified
- Includes Wiring Harness (waterproof in-line fuse, relay, rocker switch, waterproof connector, battery terminals), (4) stainless steel allen head bolts with nylon locking nuts, and gasket
- Kit includes two lights and Wiring Harness
Plashlight Pearl II - 7 Inch Round Search Light - Pair
This light is a favorite around our shop. The problem is that it is too bright. When do you need a light that is this bright? If you have an idea buy one, or two. Until then we will keep lighting up buildings across the freeway and low lying clouds (not airplanes I promise Mr. FAA).
FEATURES:
- 5W OSRAM LEDs (120W Total Each Light)
- Lumens: 15,080 (Each Light)
- Distance: 900M
- Dual Color DRL function built into light with sequential start up function
- Availability to use as daytime running light (Amber or White ) and tie into a blinker. Wiring harness only includes a pigtail of the DRL function.
- Operating Voltage: 12V DC
- PlashLights Optical Design
- Extruded aluminum body with DuPont® coating
- Aluminum Housing
- Operating Temp: -40°F ~ +165°F
- 5 Years of Continuous Use or 50,000 Hours
- Certificates: CE, RoHS, UV, Vibration, RF Anti-Interference, Salt IP69 Rated
- ** SOLD AS A PAIR WITH WIRING HARNESS **
DIMENSIONS:
Plashlight 20W Flush Mounted Low Profile LED Light - Diffused - Marine White
PlashLights 20W LED light is the perfect flush mounted light for a hard top canopy on a boat. Built for marine applications. This light is TWICE as bright as our competition.
FEATURES:
- (2) 10W CREE® OSLON LX ECE LED’s = 20W Per Light
- 2,800 Lumens / each
- 9-36 Volt DC
- 1.6A @ 12VDC
- IP69k Rated
- Extruded aluminum body with DuPont® coating
- Durable scratch resistant high impact polycarbonate lens
- 96% optical/reflector efficiency
- Genuine Gore® waterproof membrane with mechanical seal
- Deutsch® waterproof connectors
- Over / Under and reverse polarity protection
- Protected against electromagnetic (EMC) and radio frequency interference (RFI)
- LED Lifespan: 50,000 hours or 5 years of continuous use
- Operating Temp: -40°F ~ +145°F
- 316 Stainless Steel hardware and fasteners with nylon locking nuts
- 8.6g vibration compliant
- CE and RoHS certified
- Gasket and mounting hardware included
- Includes 1 Light, 9ft Pigtail of Power Wire, Gasket, Security Hardware with Security Wrench
Instructions Coming Soon
Plashlight EPIK Underwater Transom Light - COOL WHITE
Our high intensity EPIK LED single color Cool White surface mounted transom lighting for your boat is of the utmost quality and mounts virtually anywhere you want on the transom with just a small 1/2" hole required. No other light manufacturer produces such a great output for underwater lighting for as reasonable price. When you hold this light you will understand the quality by the weight of the 316 stainless steel housing, but more importantly when you turn this light on you will see the quality by the light output. Epik transom lights include an insulating gasket to isolate dissimilar metals.
Easy way to add some safety for:
- Night activities
- Swimming
- Safety for loading and unloading at night
- Great for attracting fish on your evening trips
- Easily be seen out on the water
- Extreme intensity for showing off anytime of the day
- An easy way to help your sight when loading / unloading on lifts in the dark
What a simple way to turn heads at the dock. You will be the talk of the marina or the boat ramp.
FEATURES
- 5,258 Lumens (per light)
- 90° Emitting Angle - Wide Flood Beam
- 48X 3W CREE® LED's
- Input Voltage: 12VDC (9V to 32V Max.)
- IP68 Rated
- High Borosilicate Glass Lens
- Internal Driver (for colors & modes)
- Only a 1/2” Hole Required for Power Wire (Surface Mounted Light)
- Current Draw: 4.1A @ 13.5VDC / 8.2A @ 13.5VDC for the pair
- 51.6W @ 13.5VDC
- 50,000+ Hour Life
- Intelligent Temperature Control System (TCS)
- 5ft of Power Wire
- 316L Marine Grade Stainless Steel Housing (Polished)
- Lifetime Warranty
- Underwater Use Only
*** Refer to your local authorities for legality of usage. PlashLights is not to be held responsible for any tickets, fines, accidents, girlfriends, etc. ***
INCLUDES
- Instructions
- 3 x M5 Stainless Steel Machine Screws
- 3 x M5 Stainless Steel Flat Washers
- 3 x M5 Stainless Steel Locking Nuts
- 3 x M5 Stainless Steel Self Tapping Screws
- 3 x Neoprene Washers
- 1 X Insulating Gasket
DIMENSIONS
INSTALLATION MANUAL
Plashlight PLASH® LED Neon Sign | Streaming
Our PLASH® LED Neon Sign is a great way to add some attention to your showroom, office, install bay, garage, or man cave. This display is completely self contained and will only require a single 120V outlet for power.
- 120V Direct plug in with power supply and inline switch
- Size: 23.65" X 13.33"
- Material: 6" PVC base
- Black Metal Frame
- 6" PVC on the base
- 3/8" acrylic on the face
- LED only - Not Really Neon
- Includes: power supply, in line switch, chains and hardware to hang
- Indoor Use Only
Plashlight 20W Low Profile LED Spreader Light - White Housing - Diffused
FEATURES
PlashLights 20W low profile LED spreader light is a great compact light with a compact price! This light is extremely durable and tested and designed for saltwater applications. This small 20W light is available in four different beam patterns, but it is recommended to use the diffused or scene flood beam pattern as a spreader application for wide coverage area. If distance is needed then the linear flood or spot beam shall be used.
SPECIFICATIONS
- 2 X 10W CREE® LEDs = 20W Total (Per Light)
- 160° Diffused Flood Beam
- Lumens: 2,600
- 9 ~ 36V DC
- 1.6A @ 12V DC
- IP69K Rated
- 316 Stainless Steel Hardware
- DuPont Marine White Coating
- Certificates: CE, RoHS, UV, Vibration, RF Anti-Interference, Salt Chamber
- LED Lifespan: 50,000 hours or 5 years of continuous use
- Operating Temp: -40° F ~ +145°F
- NEW: Includes 9ft of black insulated power wire for an easy connection to a T-Top of Grab Rail
DIMENSIONS
Plashlight EPIK Underwater Transom Light - RGBW
Our high intensity EPIK surface mounted transom light for your boat is of the utmost quality and mounts virtually anywhere you want on the transom with just a small 1/2" hole required. No other light manufacturer produces such a great output for underwater lighting for as reasonable price. When you hold this light you will understand the quality by the weight of the machined & polished 316L Stainless Steel housing, but more importantly when you turn this light on you will see the quality by the light output. Epik transom lights also include an insulating gasket to isolate dissimilar metals if you are mounting to an aluminum or steel hull.
Easy way to add some safety for:
- Night activities
- Swimming
- Loading and unloading at the boat ramp
- Great for attracting fish on your evening trips
- Easily be seen out on the water
- Extreme intensity for showing off anytime of the day
- An easy way to help your sight when loading / unloading on lifts in the dark
What a simple way to turn heads at the dock. You will be the talk of the marina or the boat ramp.
FEATURES
- 5,258 Lumens (per light)
- 90° Emitting Angle - Wide Flood Beam
- 48X 1W CREE® LED's
- Input Voltage: 12VDC (9V to 32V Max.)
- IP68 Rated
- High Borosilicate Glass Lens
- Requires an External RGBW Controller (for changing the colors & modes, dimming, etc)
- Only a 1/2” Hole Required for Power Wire (Surface Mounted Light)
- Current Draw: 3.6A @ 13.5VDC / 7.3A @ 13.5VDC for the PAIR
- 50,000+ Hour Life
- Intelligent Temperature Control System (TCS)
- 5ft of Power Wire
- 316L Marine Grade Stainless Steel Housing (Polished)
- Lifetime Warranty
- Underwater Use Only
*** Refer to your local authorities for legality of usage. PlashLights is not to be held responsible for any tickets, fines, accidents, girlfriends, etc. ***
EACH BOX INCLUDES
- 3 x M5 Stainless Steel Locking Nuts
- 3 x M5 Stainless Steel Washers
- 3 x M5 Stainless Steel Bolts with a Hex Head
- 3 x M5 Stainless Steel Self Tapping Screws
- 3 x Neoprene Washers
- 1 x EPIK Transom Light in RGBW
- 1 x Insulating Gasket (for metal hulls only)
- 1 x Instructions
DIMENSIONS
INSTALLATION MANUAL
Showing 424/4434
Next