Anchoring & Docking

Quick Anchor Rode 20' of 10mm Chain and 200' of " Rope [FVC100358220Q00]

Quick Anchor-Rode Rope and Chain
20' of 10mm Chain, 200' of 5/8" Rope

Slim Splice Quick System Rope and chain

An anchor-rode is the connection system between anchor and the boat and its
sturdiness during mooring is undoubtedly essential.

The critical point of the rope and chain combination is the joint, or technically speaking, the splice.

In Quick's Slim Splice, the splice is much slimmer and more tapered, preventing the jamming which often occurs on the gypsy, during changeover from rope to chain.

Quick's Slim Splice consists of a calibrated chain and a top quality 3-strand polyester rope, to guarantee optimum strength and life.

Specifications:

• Rope Type: 3-Strand Nylon
• Rope Length (Feet): 200'
• Rope Diameter (Inches): 5/8"
• Chain - Length (Feet): 20'
• Chain - Diameter (Inches): 10mm
• Box Dimensions: 13"H x 15"W x 15"L WT: 55.43 lbs
• UPC: 688614354100

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.

HRC8

• Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
• Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design
• Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation
• High efficiency spur gearbox incorporating a robust non-backwind mechanism
• High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch
• Emergency "free fall" function in the event of onboard power failure
• Revolutionary new chainwheel - see over
• Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
• Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor
• Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance
• Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection
• Kits include:windlass, on/off breaker panel, reversing soleniod, up/down panel switch, a clutch release handle

Specifications:

• Model: HRC8
• Maximum Pull: 900lbs
• Chain Short Link: 5/16"
• Rope Size (Nylon): 9/16"
• Line Speed(Anchor Retrieval): 108'/min
• Power Supply(DC): 12V
• Motor Power: 600W
• Net Weight: 25lbs

Specifications:

• Chain - Diameter (Inches): 5/16"
• Freefall: Yes
• Rope Diameter (Inches): 9/16"
• Vertical/Horizontal: Horizontal
• Box Dimensions: 10"H x 14"W x 15"L WT: 29 lbs
• UPC: 9414761104029

MAXWELL AA710
WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTER

All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.

• High level wireless transmission security - 2.4GHz ISM band
  
• Hand held controller displays rode count plus signal strength and battery level
  
• Console requires two AA batteries
  
• Ergonomic shape with wrist strap connector
  
• Water resistant to IP65
  
• Rubber moulding for grip and non slip protection
  
• Console holder and protective cover
  
• Shockproof
  
• IEEE 802.15.4 compliant

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" Rope

Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Features:

• Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
  
• 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
  
• 2-piece watertight case allows for quick and easy, on-deck, routine maintenance
  
• Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
  
• Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
  
• Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10
  
• Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
  
• Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
  
• The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  
• Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required
  
• The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel

Specifications:

• Chain - Diameter (Inches): 3/8"
• Freefall: Yes
• Rope Diameter (Inches): 5/8"
• Vertical/Horizontal: Horizontal
• Box Dimensions: 11"H x 17"W x 20"L WT: 55 lbs
• UPC: 1000000002638

• The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope.
  
• Maximum Pull: 660lbs.
  
• Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind.
  
• The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer.
  
• An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use.
  
• The RC6 is available only as a low profile unit (no optional capstan drum).
  
  Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Specifications:

  • Chain - Diameter (Inches): 1/4"
  • Rope Diameter (Inches): 1/2"
  • Vertical/Horizontal: Vertical
  • Box Dimensions: 10"H x 15"W x 15"L WT: 25 lbs
  • UPC: 1000000004816
  
  Brochure (pdf)

Powerwinch 200' of 5/8" Rope 15' of 5/16 HT Chain Rode [P10297]

• 8 lengths to meet your needs
  
• All rodes comes with a tapered backsplice
  
• 1/2" and 5/8" Powerwinch premium three strand nylon line, tested to be the highest quality and best performing line
  
• Acco G4 Hi-Test 1/4" and 5/16" chain
  

  Specifications:

  • Rope Type: 3-Strand Nylon
  • Rope Length (Feet): 200'
  • Rope Diameter (Inches): 1/2"
  • Chain - Length (Feet): 15'
  • Chain - Diameter (Inches): 5/16"
  • Box Dimensions: 13"H x 15"W x 15"L WT: 35.85 lbs
  • UPC: 033936102975

RC10 Automatic Rope/Chain Windlass

• Designed for 5/16" chain and 5/8" rope combination
  
• Maximum pull: 1540 lbs
  
• Metric Chain Size: 8mm
  
• Motor Wattage: 1000W
  
• Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance.
  
• Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass.
  
• Manufactured from marine grade chromed bronze for long term durability
  
• The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required!
  
• A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  
• Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck.
  
• Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market.

Specifications:

• Chain - Diameter (Inches): 5/16"
• Freefall: Yes
• Rope Diameter (Inches): 5/8"
• Vertical/Horizontal: Vertical
• Box Dimensions: 11"H x 17"W x 20"L WT: 50 lbs
• UPC: 1000000004267

RC10 Automatic Rope/Chain Windlass

• Designed for 3/8" chain and 5/8" rope combination
  
• Maximum Pull: 1870lbs.
  
• Metric chain size: 10mm
  
• Motor Wattage: 1200W
  
• Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance.
  
• Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass.
  
• Manufactured from marine grade chromed bronze for long term durability
  
• The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required!
  
• A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  
• Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck.
  
• Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market.

Specifications:

• Chain - Diameter (Inches): 3/8"
• Freefall: Yes
• Rope Diameter (Inches): 5/8"
• Vertical/Horizontal: Vertical
• Box Dimensions: 12"H x 17"W x 20"L WT: 47 lbs
• UPC: 1000000004151