Above $500

Johnson Pump F7B-9 Impeller Pump OEM - Flange Style Mount [10-13599-02]

F7B-9 Impeller Pump OEM - Flange Style Mount

Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.

Features: 

• John Deere flange mount for most flange mount for engines such as Deere S350, PowerTech 4.5L, 4045DFM70/TFM75, Powertech 6.8L, 6068TFM75/TFM76
• A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
• Wearing parts are easily replaceable for all standard models

Applications:

• Engine cooling – raw water handling
• Freshwater handling

Specifications: 

• Port size: (inch) 1 1/4" Hose
• Mount Type: SAE A Flange
• CAM: Full 1/1
• Lip seal
• Material: Bronze

Cooling Capacity: 

The required output of the cooling pump – raw water as well as fresh water handling – is related to:

• Engine type: (gasoline or diesel)
• Type of cooling system (size of heat exchanger)
• Water cooled engine oil, reverse gear, exhaust system

*Sold as an Individual

Echonautics Bronze Stem Thru-Hull High-Frequency CHIRP Transducer - 1kW  130 - 210kHz [CB131H1KW]

Bronze Stem Thru-Hull High-Frequency CHIRP Transducer - 1kW & 130 - 210kHz

Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money. 

Technical Specifications:

• Frequency 130-210kHz
• 1kW
• Mounting Style - Thru-Hull
• Bronze Stem

Specifications:

• Cable Length (Feet): 26'
• Chirp: High
• Imaging: Standard
• Mounting Style: Thru-Hull
• Pins: 8
• Speed Included: No
• Temperature: Yes

Echonautics Bronze Stem Thru-Hull Medium Frequency CHIRP Transducer - 1kW  85 - 135kHz [CB131M1KW]

Bronze Stem Thru-Hull Medium Frequency CHIRP Transducer - 1kW & 85 - 135kHz

Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money. 

Technical Specifications:

• Frequency 85-135kHz
• 1kW
• Mounting Style - Thru-Hull
• Bronze Stem

Specifications:

• Cable Length (Feet): 26'
• Chirp: Medium
• Imaging: Standard
• Mounting Style: Thru-Hull
• Pins: 8
• Speed Included: No
• Temperature: Yes

Echonautics Bronze Stem Thru-Hull High-Frequency CHIRP Transducer - 600W  130 - 210kHz [CB131H600]

Bronze Stem Thru-Hull High-Frequency CHIRP Transducer - 600W & 130 - 210kHz

Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money. 

Technical Specifications:

• Frequency 130-210kHz
• 600W
• Mounting Style - Thru-Hull
• Bronze Stem

Specifications:

• Cable Length (Feet): 26'
• Chirp: High
• Imaging: Standard
• Mounting Style: Thru-Hull
• Pins: 8
• Speed Included: No
• Temperature: Yes

Echonautics Bronze Stem Thru-Hull Medium Frequency CHIRP Transducer - 600W  80-130kHz [CB131MA600]

Bronze Stem Thru-Hull Medium Frequency CHIRP Transducer - 600W & 80-130kHz

Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money. 

Technical Specifications:

• Frequency 80-130kHz
• 600W
• Mounting Style - Thru-Hull
• Bronze Stem

Specifications:

• Cable Length (Feet): 26'
• Chirp: Medium
• Imaging: Standard
• Mounting Style: Thru-Hull
• Pins: 8
• Speed Included: No
• Temperature: Yes

Balmar Alternator 120 AMP 12V 4" Dual Foot Saddle Dual Pulley w/Isolated Ground [604-120-DV]

Alternator 120 AMP 12V 4" Dual Foot Saddle Dual Pulley with Isolated Ground

Alternator, 604 Series, 120A, 12V, Saddle Mount (Dual Foot), 4in, Deep Dual Vee Pulley, Isolated Ground 4" J-180-Style Mounting;  Typical for Caterpillar, Cummins, Detroit Diesel & John Deere Engines

Replaces: 604-120-SR-IG

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 120A
• Voltage: 12v
• Box Dimensions: 9"H x 9"W x 10"L WT: 13.65 lbs
• UPC: 676205131117

Brochure (pdf)

Balmar Alternator 100 AMP 12V 3.15" Dual Foot Saddle J10 Pulley w/Isolated Ground [60-100-J10]

Alternator 100 AMP 12V 3.15" Dual Foot Saddle J10 Pulley with Isolated Ground

Alternator, 60 Series, 100A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines

Replaces: 60-100-SR-IG

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Amperage: 100A
• Voltage: 12v
• Box Dimensions: 9"H x 9"W x 10"L WT: 12.7 lbs
• UPC: 676205500661

Brochure (pdf)

TACO 13-1/8" x 10" Electric Seat Slide [M20-1013E]

13-1/8" x 10" Electric Seat Slide

Perfect for seats 23" to 28" wide, this 13-1/8" X 10" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. 

Features:

• Ideal for seats 23" to 28"
• Features 5" of travel distance (stroke length)
• Water-resistant IP66 rating
• Meets H31 testing standards for seat applications
• Precision-machined 6000-series aluminum chassis
• Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight and shock resistant 
• Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
• Quite an operation ≤ 58dB
• Electric actuator
• Self-locking at any given position (at rated loads)
• No racking in any direction due to precision tolerances in the track/glide system
• All electric seat slides and components are acid-etched clear anodized
• Made in the USA 
• 3-year limited warranty

Specifications:

• 12V DC 9 AMP Max current
• Max load 3500N
• Push and pull force of 1500N
• IP66 Rated 
• Speed 13.5 mm/Sec @ 1500N

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Brochure (pdf)