Above $500

4 Bow 8' Pontoon Bimini Top with Boot - Pacific Blue Acrylic

*Fits 96" to 102" Beam Widths

The tough, rigid 1″ square satin-finish tube compliments the rails on the pontoon boat. All 4-bow square tube pontoon tops have an attached rear brace kit with quick-release pins, high-grade nylon fittings, and matching zippered storage boot.

Our pontoon tops are available in various fabrics and colors to protect you from the sun’s harmful UV rays while complimenting your pontoon boat. Depending on the length of your pontoon boat and the amount of coverage you need, Carver offers a full range of pontoon bimini tops from 8 feet to 16 feet long. Carver also has a wide variety of Styled-to-Fit pontoon boat covers.

All Carver pontoon tops are available with or without a cut-out for a running light.  No matter which size or design bimini you choose for your pontoon boat, you can trust a Carver pontoon top to provide you with many years of reliable service.

Sunbrella®/Outdura®

Premium 100% Solution Dyed Marine Acrylic 9.25 oz Fabric utilizing either Sunbrella® or Outdura®. Both fabric brands are considered to be industry-leading solutions for the marine industry with competitive quality, performance, and value. Both are highly UV and mildew-resistant, providing excellent resistance to fading and rot, excellent (top-of-the-line) sun blockage, breathability, and water repellency. We reserve the right to provide either fabric based on availability. (10-Year Limited Warranty on Sunbrella® and Outdura®)

Features:

• Measurements - 48" (H) x 96" (L)

• Construction - Tough and rigid
• High-grade domestic nylon - Fittings standard
• Stainless steel snap hooks and eye straps
• Weather-Resistant - Anti-wick thread used throughout canvas construction
• Tubing - 1" square tube satin-finish aluminum
• Stainless steel adjuster buckles and assembly fasteners
• Canvas Binding - 100% marine-grade acrylic
• Professional Stitching - No raw edges

4 Bow 8' Pontoon Bimini Top with Boot - Cadet Grey Acrylic

*Fits 96" or 102" Beam Widths

The tough, rigid 1″ square satin-finish tube compliments the rails on the pontoon boat. All 4-bow square tube pontoon tops have an attached rear brace kit with quick-release pins, high-grade nylon fittings, and matching zippered storage boot.

Our pontoon tops are available in various fabrics and colors to protect you from the sun’s harmful UV rays while complimenting your pontoon boat. Depending on the length of your pontoon boat and the amount of coverage you need, Carver offers a full range of pontoon bimini tops from 8 feet to 16 feet long. Carver also has a wide variety of Styled-to-Fit pontoon boat covers.

All Carver pontoon tops are available with or without a cut-out for a running light.  No matter which size or design bimini you choose for your pontoon boat, you can trust a Carver pontoon top to provide you with many years of reliable service.

Sunbrella®/Outdura®

Premium 100% Solution Dyed Marine Acrylic 9.25 oz Fabric utilizing either Sunbrella® or Outdura®. Both fabric brands are considered to be industry-leading solutions for the marine industry with competitive quality, performance, and value. Both are highly UV and mildew-resistant, providing excellent resistance to fading and rot, excellent (top-of-the-line) sun blockage, breathability, and water repellency. We reserve the right to provide either fabric based on availability. (10-Year Limited Warranty on Sunbrella® and Outdura®)

Features:

• Measurements - 48" (H) x 96" (L)

• Construction - Tough and rigid
• High-grade domestic nylon - Fittings standard
• Stainless steel snap hooks and eye straps
• Weather-Resistant - Anti-wick thread used throughout canvas construction
• Tubing - 1" square tube satin-finish aluminum
• Stainless steel adjuster buckles and assembly fasteners
• Canvas Binding - 100% marine-grade acrylic
• Professional Stitching - No raw edges

NavPod StarPod 2 System f/Starlink Gen2 Actuated Dish (20.2 x 11.9 Dish Size) [SPS2000]

StarPod 2 System for Starlink Gen2 Actuated Dish (20.2 x 11.9″ Dish Size)

*Starlink Dish NOT INCLUDED

The StarPod 2 System is a waterproof, secure, attractive mounting solution for your Starlink Gen2 Actuated antenna. The housing features a built-in 10-degree angle and full swivel adjustability so that the dish can be manually adjusted for an optimized view of Starlink satellites in the sky. The 10-degree angle also prevents water from pooling on top of the housing, which can cause signal interference.

Note: Assembly of this product requires the use of a deck fill wrench (Groco model SW-2531 or equivalent product). This tool is NOT included with the StarPod.

What are the benefits of mounting a Starlink dish in a StarPod?

StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.

Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.

Features:

• Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
• Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job.
• Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
• Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Whitecap 304 Stainless Steel 4-Step Sliding Under Platform Ladder [S-1858]

304 Stainless Steel 4-Step Sliding Under Platform Ladder

Features:

• 304 Stainless Steel
• Extended Dimensions: Length: 42-1/2", Width: 10", Step Distance: 10-1/2"
• Stowed Dimensions: Length: 16", Width: 12", Height: 4"
• 400LB Capacity
• Telescoping Design 
• Folds Away and Locks Securely in Place
• Low Profile when Stowed

Specifications:

• Extended Length: 42-1/2"
• Steps: 4
• Step Width: 10"

IMPULSE XL Smart Control Module [75012-10]

XL Smart Control Module

The replacement control module for the IMPULSE XL Smart Series Jack Plate.

IMPULSE Series Smart Control Module [75012]

Smart Control Module

Specifications:

• Weight: 2 lbs
• Dimensions: 10 x 6 x 4 inches

IMPULSE Series 12V Linear Actuator [75009-5-12]

12V Linear Actuator

For up to 250HP

Specifications:

• Weight: 13lbs
• Dimensions: 14 x 10 x 6 inches

IMPULSE XL Smart Control Upgrade Kit [75090-10]

XL Smart Control Upgrade Kit

The IMPULSE XL Smart Control Upgrade Kit allows you to add all the Smart features to your IMPULSE XL Standard Series Jack Plate.  The kit includes the Smart Control Module, Wireless Digital Gauge Remote, Trailer Button, and a replacement actuator cable. The kit can be installed without removing the Jack Plate from your boat or the outboard from the Jack Plate.