Above $500

MultiPlus Compact 12/2000/80-150 120V VE.Bus UL Approved

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. 

Unique PowerAssist Feature

The MultiPlus will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery. 

Uninterrupted AC Power (UPS Function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. 

Virtually Unlimited Power Thanks To Parallel Operation

Up to 6 Multis can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase, and split-phase capabilities. 

Remote Monitoring & Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more…

Phoenix Smart IP43 Charger 12/50 (3) 120-240VAC Requires 5-15P Mains Cord

With boat owners in mind, this adaptive 5-step charger can provide either 30A or 50A of charge to each of the three battery banks. Or the Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. 24V models are available with a 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features.

Specifications:

• Charger Input - Voltage: 120/240v
• Charger Output - Amps: 50a
• Charger Output Voltage: 12v
• Charging Banks: 3
• Portable: No
• Box Dimensions: 6"H x 10"W x 11"L WT: 7 lbs
• UPC: 8719076053514

Panther T5 Through Tilt Tube Electro Steer - Saltwater [550503]

T5 Through Tilt Tube Electro Steer - Saltwater

T5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.

Mounting hardware included. Controlled by a 2 button handheld remote with a 24′ cable. (See optional wireless remote 55-0105).

Bennett Marine One Box Dual Station f/Hydraulic Systems [OBI9000H-DS]

One Box Dual Station for Hydraulic Systems

An attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster, and correct listing.

Features:

• Convenient “All Up” and “All Down” buttons
• Trim tab position LEDs always show you where your tabs are
• Auto tab retraction (tabs retract up when the ignition is powered off)
• Easy-to-install single lock nut design
• Compatible with other trim tab system brands
• Backed by Bennett’s outstanding customer support
• Engineered for Ease of Installation

What's In The Box?

• (1) Integrated Helm Display
• (2) Actuator Upper Hinges with 6′ sensors
• (2) 20′ Extension sensor cables (Deutch to Deutch)
• (1) Installation instructions
• Required hardware for various retrofit options

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SmartSolar MPPT VE CAN 250V-100A with VE.CAN Port

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks?

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connect to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units

The VE.Can SmartSolar charger isequipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy-chained" to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Control Display

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single-unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live data, set-up, and management, straight from the face of the device.  

Panther T4 Through Tilt Tube Electro Steer -Saltwater - No Electronics [550103NE]

T4 Through Tilt Tube Electro Steer - Saltwater - No Electronics

A unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main engine and kicker motor. Controlled by a 24′ cable and two-button handheld remote. Wireless option available.

*The NE option has NO ELECTRONICS to be used with a Trollmaster.  Please see item 550103 for Electro Steer with Electronics.

Balmar Alternator 120 Amp 12V 3.15" Dual foot Saddle Single K6 Pulley w/Isolated Grounding [60-120-K6]

Alternator 120 Amp 12V 3.15" Dual foot Saddle Single K6 Pulley with Isolated Grounding

Alternator, 60 Series, 120A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre Engines.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Voltage: 12v
• Amperage: 120A
• Box Dimensions: 9"H x 9"W x 10"L WT: 13.35 lbs
• UPC: 676205750585

Brochure (pdf)

SuproFlex Rub Rail Kit - Black with Flex Chrome Insert - 2"H x 29/32"W x 80'L

The SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. 

Features:

• Ideal for boats up to 65'
• Co-extruded to provide two levels of hardness
• Rigid backing and soft durometer front
• Shock-absorbing channels for higher impact resistance
• Lighter weight than traditional vinyl rub rail
• Requires no pre-forming and minimal heating
• Pairs with V12-0307CP (included in kit)
• Made in the USA
• 5-year limited warranty