Above $500

Dometic MasterFlush 7160 Bone Electric Macerating Toilet w/Orbit Base - Raw Water - 12V [9610007276]

MasterFlush 7160 Bone Electric Macerating Toilet with Orbit Base - Raw Water - 12V

Space-saving macerator toilet with residential proportions and seawater flush. By incorporating clever 360° Orbit technology it fits perfectly into a small area. It is quiet, effective, and energy efficient by design and purpose-built for retrofitting into small boats.

Features:

• Installation Friendly
• Versatile
• Space saving due to the 360° Orbit technology
• Energy efficient and a low water consumption per flush
• Small footprint – fits in almost any head compartment
• A highly effective macerator system
• Strong flow and inlet water strainer for robust, bowl-clearing flush every time

Specifications:

• Color: Bone
• Voltage: 12V
• Base: Orbit
• Type: Electric Macerating

Dometic NRX 130E Compressor Refrigerator - 130L - Black [9620017098]

NRX 130E Compressor Refrigerator - 130L - Black

Modern look outside, energy-efficient compressor technology inside: this roomy refrigerator provides almost 126 L of cool storage for your travel provisions. Its frameless black front, integrating a convenient full-width handle, cuts a good figure in the kitchenette. The interior has been reduced to the very essence: two shelves in the cabinet, and one bottle holder in the door.

Note: Dometic E (Economy) Series refrigerators are not a 3-in-1 fridge/freezer model. Refrigeration capabilities only. E Series refrigerators are also DC only. The AC/DC converter part number 9620013451 would be needed for AC applications.

*Frame not included

Features:

• Winter Mode - Smart closing mechanism to create a gap between the fridge and door for airing out
• Premium Compressor - Energy-efficient, light, compact compressor with 3 operating modes (Eco/Boost/Silent)
• Reliable entry-level compressor fridge
• Energy-efficient variable speed compressor reduces power consumption
• Frameless door with black front panel and full-width handle
• Beveled rear side for maximal utilization of space on board
• Reversible door hinge – can be fitted left or right as required
• Dual-function locks can also act as vents for your fridge
• Standard or flush-mount installation frame available as an accessory

Technical Specifications:

• Dimensions - 31.97" (H) x 20.67" (W) x 22.36" (D)
• Weight - 55.12 lbs
• Input Voltage - 12/24V
• Rated Input Power - 70W
• Refrigerant Type - R1234YF

Dometic NRX 60S Compressor Refrigerator - 60L - Matte Stainless Steel [9620017095]

NRX 60S Compressor Refrigerator - 60L - Matte Stainless Steel

Fresh design, superior energy efficiency: this smart compressor refrigerator provides 58 l of cool storage. Its elegant frameless door, integrating a stainless steel front panel and a convenient full-width handle, opens to a versatile interior. You can easily remove the 6.1 l freezer compartment to use the full refrigeration or deep freezing cabinet capacity.

*Frame not included

Features:

• Easy-to-use control panel - Flush-mounted inside the cabinet, with nicely integrated LED light bar
• Full-width door handle - Neatly integrated for easy access from every angle
• Two crispers - For storing fruits and vegetables at the optimal temperature
• Removable freezer - The freezer compartment can easily be removed to make room for more fridge storage
• Winter Mode - Smart closing mechanism to create a gap between the fridge and door for airing out
• Premium Compressor - Energy-efficient, light, compact compressor with 3 operating modes (Eco/Boost/Silent)
• 3-in-1 cooling solution: fridge, freezer, or both at the same time
• Frameless door with dark silver front panel and full-width handle
• Beveled rear side for maximal utilization of space on board
• Reversible door hinge – can be fitted left or right as required
• Dual-function locks can also act as vents for your fridge
• Standard or flush-mount installation frame available as an accessory

Technical Specifications:

• Dimensions - 20.67" (H) x 17.64" (W) x 21.14" (D)
• Weight - 39.69 lbs
• Input Voltage (AC) - 100 - 240V
• Input Voltage (DC) - 12/24V
• Rated Input Current - 1/0.42A
• Rated Input Power - 55W
• Refrigerant Type - R1234YF

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

Dometic NRX 50S Compressor Refrigerator - 50L - Matte Stainless Steel [9620017089]

NRX 50S Compressor Refrigerator - 50L - Matte Stainless Steel

Fresh design, superior energy efficiency: this smart compressor refrigerator provides 46 l of cool storage. Its elegant frameless door, integrating a stainless steel front panel and a convenient full-width handle, opens to a versatile interior. You can easily remove the 4.4 l freezer compartment to use the full refrigeration or deep freezing cabinet capacity.

*Frame not included

Features:

• Easy-to-use control panel - Flush-mounted inside the cabinet, with nicely integrated LED light bar
• Full-width door handle - Neatly integrated for easy access from every angle
• Two crispers - For storing fruits and vegetables at the optimal temperature
• Removable freezer - The freezer compartment can easily be removed to make room for more fridge storage
• Winter Mode - Smart closing mechanism to create a gap between the fridge and door for airing out
• Premium Compressor - Energy-efficient, light, compact compressor with 3 operating modes (Eco/Boost/Silent)
• 3-in-1 cooling solution: fridge, freezer, or both at the same time
• Frameless door with dark silver front panel and full-width handle
• Beveled rear side for maximal utilization of space on board
• Reversible door hinge – can be fitted left or right as required
• Dual-function locks can also act as vents for your fridge
• Standard or flush-mount installation frame available as an accessory

Technical Specifications:

• Dimensions - 20.67" (H) x 14.96" (W) x 20.08" (D)
• Weight - 40.79 lbs
• Input Voltage (AC) - 100 - 240V
• Input Voltage (DC) - 12/24V
• Rated Input Current - 1/0.42A
• Rated Input Power - 50W
• Refrigerant Type - R1234YF

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

Shockwave S5-LW Suspension Base - White [SW-05026-W]

S5-LW Suspension Base - White

The Shockwave S5-LW lightweight marine suspension base is our entry-level recreational suspension option. Designed to mitigate the shock of wave impact in light conditions on freshwater lakes or cabin boats on the ocean. 

Made from anodized A360 cast aluminum that has been powder-coated and fitted with stainless steel hardware, the S5-LW suspension base utilizes a three-link forward action suspension design.

Fitted with an X-Fusion O2 PRO R air-sprung shock with adjustable rebound, suspension travel is 4-inch vertical and 1.5-inch forward, mitigating deceleration associated with wave impact. A shock pump with a pressure gauge is included with your purchase at no extra cost.

Features:

• Designed and manufactured in Canada
• Custom-tuned and valved marine X-Fusion O2 R, air spring, and shock with adjustable rebound
• Surge protection: Suspension travel is 4-inch vertical and 1.5-inch forward, mitigating deceleration associated with wave impacts
• 3-Link Forward Action
• Anodized A360 Cast Aluminum, 304 SS Hardware, Powder Coated
• Minimal parts count and simple construction
• Easy to mount and adapt to the current seating

Vessel Application:

The S5-LW suspension base is most often found on fishing boats, coastal cruisers, ski/wake boats, guide boats, fisheries boats, whale watching boats, crew boats and yacht tenders. Due to its universal design, the S5-LW can be fitted to almost any boat and any seat.

Actisense PRO NMEA 0183 Multiplexer - 5 Inputs  2 ISO-Drive Outputs, Ethernet  Serial Connections [PRO-NDC-1E]

PRO NMEA 0183 Multiplexer - 5 Inputs & 2 ISO-Drive Outputs, Ethernet & Serial Connections

The PRO-NDC-1E is more than just an NMEA 0183 Multiplexer…

Rugged, Robust, type-approved multiplexer with powerful, advanced features enables baud rate adjustments, auto-switching, and sentence-level filtering.

Features:

• Auto-switching between inputs to allow for a primary, secondary, and tertiary priority input.
• Configurable baud rates to allow 38400 and 4800 baud devices to operate through the same multiplexer.
• Sentence filtering to block unwanted sentences from specific outputs helps to limit bandwidth consumption.
• Easy to configure using the web-based UI, no need to manually enter and edit strings of text.
• RINA type-approved device means the multiplexer is fit for leisure, commercial, and class/type installations.
• Multiple LEDs allow for ‘quick glance’ diagnostics to ensure everything is operating correctly.
• NMEA 0183 data streaming over Ethernet enables connectivity to existing Ethernet devices and systems.
• 5 OPTO-Isolated NMEA 0183 inputs and 2 ISO-Drive NMEA 0183 outputs provide protection for all connected instruments.
• Dedicated bi-directional Serial port (fully isolated utilising ISO-Drive technology)
• A serial port can be used as an additional input/output
• Ethernet port supports direct and network connections
• NMEA 0183 streaming via Ethernet
• Configurable input and output baud rates
• Allows Data combining and rate conversion
• 2 independent Autoswitch virtual inputs with priority
• Isolation from battery supply
• Diagnostic LED’s
• Optional DIN rail mount
• Type Approved
• Quick and easy to install
• Configuration using a standard web browser, no PC operating system compatibility issues
• Advanced features solve NMEA 0183 data routing problems
• Fully isolated with ISO-Drive technology for peace of mind
• Easy firmware updates make the device future-proof

Technical Specifications:

Power Supply

• Input supply voltage - 9 to 35 V DC    
• Input supply current - 150mA max @ 12V DC (all outputs @ full drive into 100 ohm loads)    
• Input protection - Continuous reverse polarity, transient overvoltage, and ESD protection    
• Power indicator - LED, Blue – indicates unit is functioning correctly    
• Input Supply connector - Pluggable 2-way screw terminal, 5.08mm pitch (12 to 30 AWG)

NMEA 0183 Port – Listener & Talker

• Number of Listener / Input Ports - 5 isolated NMEA 0183 Listeners    
• Number of Talker / Output Ports - 2 isolated NMEA 0183 Talkers    
• Compatibility - Fully NMEA 0183, RS422 & RS232 compatible. RS-485 Listener compatible    
• Speed/baud rate - 4800 to 38400 bps    
• Talker Output Voltage Drive - >= 2.2V (differential) into 100 ohm    
• Talker Output Current Drive - 20 mA maximum per output    
• Talker Output Protection - Short circuit and ESD    
• Talker Data Indicator - LED, Orange (Flashes with data rate)    
• Listener Input Voltage Tolerance - -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)    
• Listener Input Protection - Current limited, overdrive protection to 40 VDC, and ESD protection    
• Listener Data Indicator - LED, Green (Flashes with data rate)    
• Connectors - Pluggable 2/3 way screw terminals, 5.08mm pitch (12 to 30 AWG)

Serial Port

• Compatibility - RS422 & RS232 compatible. RS-485 Listener compatible    
• Speed/baud rate - 115200 bps    
• Output voltage drive - >= 2.1V (differential) into 100 ohms    
• Output current drive - 20 mA max    
• Output protection - Short circuit and ESD    
• Input voltage tolerance - -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)    
• Input protection - Current limited, overdrive protection to 40 VDC, and ESD protection    
• Data Indicators - LED’s: Green = Receive, Orange = Transmit    
• Connectors - Pluggable 3-way screw terminals, 5.08mm pitch (12 to 30 AWG)

Ethernet Port

• Host interface - 10/100BaseT, automatic polarity detection    
• Supported protocols - TCP/IP for configuration and firmware updating, TCP/IP and UDP for NMEA 0183 comms    
• Connector - RJ45    
• Indicators - Green – Link, Yellow – 100 Mbps

Isolation

• NMEA 0183 Listener - Uses IsoDriveTM, Hi-Pot tested to 1000V    
• NMEA 0183 Talker - Uses IsoDriveTM, Hi-Pot tested to 1000V    
• Serial Port - Uses IsoDriveTM, Hi-Pot tested to 1000V    
• Ethernet Port - 2kv for 60s

Mechanical

• Housing Material - 316 Stainless Steel    
• Dimensions - 139mm (W) x 98mm (H) x 26mm (D)    
• Weight - 360g    
• Mounting - Bulkhead mount or DIN rail mount (DIN kit 1)

Approvals and Certifications

• EMC - IEC 60945:2002-08, DNVGL-CG-0339:2019 & IACS UR E10 Rev7    
• Compass Safe Distance - 300mm    
• Type Approval Certificate - RINA    
• Operating Temperature - -25 to +70°C    
• Storage Temperature - -40 to +85°C    
• Relative Humidity (RH) - 95% @ 55°C    
• Environmental Protection - IP40    
• Guarantee - 3 years (5 Years if registered)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Data Interface: NMEA 0183
• Box Dimensions: 2"H x 6"W x 10"L WT: 1 lbs
• UPC: 5060998710577

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

RUPES Random Orbital Polisher Bigfoot HLR21 iBrid Basic Kit [HLR21/CB2/BAS]

Random Orbital Polisher Bigfoot HLR21 iBrid Basic Kit

The iBrid Rupes BigFoot polishers, a true game-changer in the world of polishing applications. This compact yet powerful tool seamlessly combines cordless and corded capabilities, offering freedom and reliability. Whether you’re a professional or an enthusiast, this polisher elevates your work to a new level. Experience unparalleled performance, ergonomic design, and adaptability like never before. Welcome to the future of surface care with the iBrid Rupes BigFoot polishers.

Features:

• Eccentric set
• Anti-spinning ring
• In-runner brushless motor
• Gear technology
• Led indicator
• Li-ion battery 18V

Experience the convenience and power of the BigFoot iBrid system. This advanced 18V battery system delivers 5 Ah for extended, uninterrupted operation. With an impressive 40-minute battery life at full power, it’s designed for crucial tasks, offering consistent performance even in demanding conditions, with rapid recharge cycles. Its efficient design optimizes workflow and boosts productivity.

The BigFoot iBrid polisher, powered by this high-performance battery, consistently excels in challenging applications. Complementing this system is the dual battery charger, which utilizes cutting-edge battery cell technology for lightning-fast charging. It prioritizes the highest voltage battery, ensuring a fully charged, high-capacity power source is always available.

What's In The Box?

• iBrid HLR21(9.HLR21)
• 2 x D-A INTERMEDIATE foam polishing pad(9.DA180B)
• 2 x D-A FINE foam polishing pad(9.DA180M)
• 2 x Wool polishing pad COARSE(9.NW160H)
• 2 x Wool polishing pad FINE(9.NW160M)
• D-A COARSE polishing compound(9.DACOARSE250)
• D-A FINE polishing compound(9.DAFINE250)
• Dual battery charger(9HC185LT)
• 2 x Rechargeable power pack(9HB185LT)

Specifications:

• Type: Tools & Accessories
• Box Dimensions: 8"H x 13"W x 18"L WT: 15 lbs
• UPC: 8059519689062

Owner's Manual (pdf)
Brochure (pdf)

Thetford Sani-Con Turbo 600S Macerating Waste Water Evacuation System f/Class A Motorhomes [97588]

Sani-Con Turbo 600S Macerating Waste Water Evacuation System for Class A Motorhomes

Macerating pump system for class A motorhomes.

Features:

• Designed for class A motorhomes
• 1/2-hp pump helps evacuate waste from tanks
• Can be connected to the generator or a 12V battery
• Hose and nozzle assembly with nozzle caps
• Reliable macerating pump pushes out waste
• Includes switch box assembly, 2 mounting brackets, 35-AMP fuse, and 2 electrical connectors
• Compact 1.5" diameter hose extends to 21' for easy access to dump station
• Discharge nozzle fits six dump station inlet sizes, including a garden hose extension

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Owner's Manual (pdf)