2005 products
Sort by:
2005 products
Sleipner eVision E340 48V E-Series Tunnel Bow/Stern Thruster - 340kg Thrust | E340/300TC-48V
The Next Generation of Marine Propulsion: Sleipner eVision E340
Advanced Proportional Control & Intelligent "Hold" Function
Whisper-Quiet Performance & Superior Runtimes
Key Features & Marine-Grade Benefits
-
Next-Gen PMSM Motor: 6-phase permanent magnet motor delivers automotive-grade efficiency, producing 20hp (15kW) of power while minimizing battery draw.
-
Proportional Speed Control: Modulates power output precisely as needed, resulting in ultra-quiet maneuvering and massively extended runtimes.
-
Active Air Cooling: Prevents thermal shutdowns. Built-in thermal derating gradually reduces power rather than abruptly turning off, ensuring you always maintain maneuvering control.
-
Ignition Protected (ISO 8846): Fully sealed and compliant for safe installation in engine rooms or environments where flammable vapors may be present.
-
Galvanic Isolation: The immersed lower unit gear house is completely isolated from the vessel’s electrical system, entirely eliminating stray current corrosion.
-
Zero-Maintenance Gearleg: Pre-filled for lifetime lubrication and completely sealed using a high-grade mechanical seal with ceramic and carbon surfaces.
-
S-Link™ CAN-Bus Connectivity: Effortless plug-and-play integration with Sleipner’s smart control panels, joysticks, and automatic yacht controller systems.
Technical Specifications
-
Vessel Size Fitment: 62' - 98' (19m - 30m)
-
Maximum Thrust (at 48V): 340 kg / 748 lbs
-
Nominal Thrust (at 42V): 300 kg / 661 lbs
-
Power Output: 15 kW / 20 hp
-
Voltage Supply: 48V DC
-
Tunnel Internal Diameter: 300 mm / 11.81 in
-
Propulsion System: Twin Counter-Rotating 5-Blade Q-Props
-
Control System: S-Link (CAN-Bus)
-
Net Weight: 43 kg / 94 lbs
-
Certifications: CE, UKCA, ISO 8846 (Ignition Protected)
What Else You May Need for Installation (Sold Separately):
-
Sleipner 300mm Bow Tunnel (Fiberglass or Aluminum) or Stern Tunnel kit
-
S-Link Control Cabling & PJC Proportional Control Panel / Joystick
-
Heavy-Duty 48V Battery Bank or DC-DC Converter Setup
-
Recommended ANL Fuse & Fuse Holder
Sleipner eVision E350 48V E-Series HDB Tunnel Thruster - 350kg Thrust | Bronze Props | E350/300TC-HDB
The Ultimate Heavy-Duty Marine Standard: Sleipner eVision E350 HDB
Automotive-Grade PMSM Motor Technology
Flawless Variable Speed Control & Solo-Docking "Hold" Feature
Key Features & Commercial-Grade Engineering
-
HDB Bronze Configuration: Equipped with heavy-duty 5-blade bronze skew propellers and a DNV-certified gearleg for the highest tensile strength and maximum duty cycles.
-
6-Phase PMSM Synchronous Motor: High-torque motor architecture scales back electrical current draw while optimizing power density and minimizing heat.
-
Active Air Cooling & Smart Derating: Built-in active thermal management stops heat accumulation before it starts. If safe operating thresholds are pushed, smart derating smoothly scales back performance instead of shutting down abruptly.
-
Galvanic Isolation: The submersed bronze drive leg is completely isolated from the vessel’s electrical grid, eliminating the risk of stray-current galvanic corrosion.
-
Zero-Maintenance Gearleg: Factory-sealed and pre-filled for lifetime lubrication, featuring a high-precision carbon and ceramic mechanical seal to prevent water intrusion.
-
S-Link™ CAN-Bus Connectivity: Seamless plug-and-play communication across all Sleipner control stations, proportional joysticks, and automated yacht management systems.
Technical Specifications
-
Maximum Thrust (at 48V): 350 kg / 770 lbs
-
Voltage Supply: 48V DC
-
Tunnel Internal Diameter: 300 mm / 11.81 in
-
Propeller Specification: Twin Counter-Rotating 5-Blade Skew Props (Solid Bronze)
-
Gearleg Class: Heavy Duty (DNV-Certified internals)
-
Motor Control: Integrated Inverter (Proportional Variable Speed)
-
Control Infrastructure: S-Link (CAN-Bus)
-
Applications: Heavy Commercial and Premium Yacht Bow/Stern installations
Required Equipment for Installation (Sold Separately):
-
Sleipner 300mm Tunnel Profile (GRP Fiberglass, Aluminum, or Steel)
-
S-Link Proportional Control Panel or Joystick (e.g., PJC series)
-
S-Link CAN-Bus Connecting Cables
-
Heavy-Duty 48V Battery Bank & Dedicated Marine-Class ANL Fuse Assembly
Xantrex Freedom XC 2000 True Sine Wave Inverter/Charger - 12VDC - 120VAC - 2000W/80A [817-2080]
Freedom XC 2000 True Sine Wave Inverter/Charger - 12VDC - 120VAC - 2000W/80A
True sine wave 120 Vac inverter/charger with built-in transfer switch. Designed for recreational and commercial applications.
The Freedom XC inverter/charger offers premium performance in a lightweight compact package. It cranks out full output in invert or charge mode from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom XC makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.
Inverter Features:
- Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads
- True Sine Wave AC Power: For operation of sensitive and motor loads
- Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
- Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
- Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input
- Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode
Built-In Charger Features:
- Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
- Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
- Battery Equalization: Maximizes flooded battery life
- Dead Battery Charging Down to 0 Vdc
- Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting
Specifications:
- Waveform: True Sine Wave
- Inverter Output Voltage: 120v
- Inverter Input Voltage: 12v
- Inverter Surge Rating: 4000w
- Outlet Qty: Optional
- GFCI: Optional
- DC Connection Type: Hardwire
- AC Connection Type: Hardwire
- Inverter Cont. Output Wattage: 2000w
- Box Dimensions: 10"H x 16"W x 20"L WT: 19.4 lbs
- UPC: 715535901349
Owner's Manual (pdf)
Brochure (pdf)
GT51M-THP - Stainless Steel Thru-Hull Pair DownVü/SideVü 500 W
(CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz)
Transducers with Temp (12-Pin)
This thru-hull transducer pair provides ultra-clear sonar pictures of objects, structure and fish that pass below your boat. These traditional CHIRP sonar and CHIRP DownVü/SideVü transducers are optimized for depth performance and rough conditions.
The CHIRP DownVü/ SideVü elements have a power rating of 500 W per element (1,500 W total) and operating frequencies of 260/455 kHz. The traditional CHIRP sonar has a power rating of 600 W and operating frequencies of mid-band CHIRP 80-160 kHz. It includes a built-in fast-response temperature sensor. For hull deadrises less than 25 degrees.
GT51M-THP includes a 12-pin port/starboard transducers with stainless steel stems, fairing blocks, Y-cable, bushings, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.
Compatible Devices:
- GPSMAP® 7607xsv
- GPSMAP® 7608xsv
- GPSMAP® 7610xsv
- GPSMAP® 7612xsv
- GSD™ 25 Premium Sonar Module
Specifications:
- Imaging: Standard/Down/Side
- Chirp: Medium/Non Traditional
- Cable Length (Feet): 5' + 30' y-extension
- Temperature: Yes
- Speed Included: No
- Pins: 12
- Mounting Style: Thru-Hull
- Box Dimensions: 6"H x 13"W x 17"L WT: 15 lbs
- UPC: 753759152932
Owner's Manual (pdf)
Minn Kota Riptide PowerDrive 70 Trolling Motor w/Wireless Remote - 24V - 70LB - 54" [1363586]
Riptide PowerDrive™ 70 Trolling Motor with Wireless Remote - 24V - 70LB - 54"
Riptide PowerDrive has been counted on for years by saltwater anglers who want reliable performance with smart boat control features. With a tough, sleek mount and an arsenal of reliable innovations, it's not tough to see why. Nobody outworks a Riptide.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor, and when it's time to move, it stows easily and securely.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from Powerdrive's simple and straight-forward micro remote.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Advanced Corrosion Protection
Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
One-Boat Network Enabled Riptide PowerDrive 70 lb. 54" Motor, Wireless Remote, Lanyard, MKP-37 Prop and Mounting Hardware
Specifications:
- For Use In: Saltwater
- Shaft Length: 54"
- Voltage: 24
- One-Boat Network Compatible: Yes
- QUEST Series: No
- Spot-Lock: Yes
- Built-In Sonar: None
- Foot Pedal Style: Not included
- Control: Wireless Remote
- Auto/Stow Deploy: No
- Power Trim: No
- Power Steering: Yes
- Lift-Assist: No
- Bowguard: No
- Wireless Remote: Yes
- i-Pilot Link (GPS): No
- i-Pilot (GPS): No
- AutoPilot: Yes
- CoPilot: No
- Speeds: Variable
- Digital Maximizer: Yes
- Battery Meter: Yes
- Max Amp Draw: 42
- Mount Style: Bolt-On
- Mounting Location: Bow-Mount
- Motor Style: Electric-steer
- Prop: Power Prop (MKP-37)
- Warranty: Two-Year Warranty
Specifications:
- Built-In Transducer: No
- Control Type: Wireless Remote
- Included Propeller: MKP-37
- Mounting Style: Bow
- Salt Water/Fresh Water: Salt
- Series: Riptide PowerDrive
- Shaft Length (Inches): 54"
- Thrust (Pounds): 70 lbs
- Voltage - Input Range (Volts): 24v
- Box Dimensions: 11"H x 17"W x 69"L WT: 46 lbs
- UPC: 029402051076
Owner's Manual (pdf)
Xantrex Freedom XC Pro 3000 Inverter/Charger - 3000W - 150A - 120V - 12V [818-3010]
Freedom XC Pro 3000 Inverter/Charger - 3000W - 150A - 120V - 12V
A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02).
The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.
Features:
- Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads
- True Sine Wave AC Power: For operation of sensitive and motor loads
- Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
- Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
- Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input
- Built in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power
Built-In Charger Features:
- Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
- Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
- Battery Equalization: Maximizes flooded battery life
- Dead Battery Charging Down to 0 Vdc
- Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting
- Easily configurable settings to charge any lithium ion battery
Xantrex Freedom X 3000 Truesine Inverter - 120AC/12DC Hardwire [817-3000]
Freedom X 3000 Truesine Inverter - 120AC/12DC Hardwire
True sine wave 120 VAC inverter with built-in transfer switch. Designed for recreational and commercial applications.
The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.
The Freedom X has become a popular choice for boaters in a short span of time. Xantrex has now added another product to this series — Freedom X 3000, a 3000-watt pure sine wave inverter with built-in 30A transfer relay. The Freedom X 3000 delivers full output up to 40°C/104°F with a 2 second surge of 6000 watts. The Freedom X 3000 features a large wiring bay with quick connect AC terminals for fast, reliable & easy wiring.
Features:
- Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads
- True Sine Wave AC Power: For operation of sensitive and motor loads
- Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
- Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
- Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode
- Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring
Specifications:
- Inverts: 12 Volt DC To 120 Volt AC
- Continuous Output Power (W): 3000 Watt
- With Volt/Watt Meter: No
- With Thermal Protection: No
- With Battery Cables: No
- With Fuse: No
Specifications:
- Inverter Cont. Output Wattage: 3000w
- AC Connection Type: Hardwire
- DC Connection Type: Hardwire
- GFCI: Optional
- Outlet Qty: Optional
- Inverter Surge Rating: 6000w
- Inverter Input Voltage: 12v
- Inverter Output Voltage: 120v
- Waveform: True Sine Wave
- Box Dimensions: 9"H x 16"W x 20"L WT: 19.9 lbs
- UPC: 715535901493
Lowrance Elite FS9 AI 3-IN-1 US/CAN | 000-15692-001
Discover the Elite Fishing System (FS) by Lowrance
Introducing the Elite Fishing System (FS) by Lowrance your essential companion for a successful fishing experience! This innovative fishfinder merges advanced technology with user-friendly operation, making it perfect for anglers of all skill levels. With ActiveTarget live sonar and high-resolution Active Imaging, youll be empowered to locate and catch more fish, whether in freshwater or saltwater.
What sets the Elite FS apart is its robust access to critical mapping information. With preloaded C-MAP Contour+ Fishing Maps featuring 1-foot contours on over 8,900 lakes, you gain precise insights into your fishing locations. Plus, the high-resolution, multi-touch touchscreen display makes navigation effortless!
- Navigate with ease: Utilize C-MAP Easy Routing and Navionics Autorouting for hassle-free navigation.
- Enhanced visibility: Leverage FishReveal technology for superior target separation and clearer fish identification.
- Versatile mapping: Experience Active Imaging 3-in-1, providing SideScan, DownScan, and CHIRP sonar options.
- Seamless connectivity: Enjoy integrated wireless, NMEA 2000, and Ethernet for easy connections.
- Convenience at your fingertips: Effortlessly control your Power Pole anchors and Ghost Trolling Motor directly from the touchscreen interface.
Elevate your fishing adventures with the Elite Fishing System the perfect blend of technology and accessibility for passionate anglers! Order yours today to experience unmatched fishing success!
- Easily navigate with C-MAP Easy Routing and Navionics Autorouting.
- Enhance visibility and target separation with FishReveal technology.
- Experience advanced sonar capabilities with Active Imaging 3-in-1.
- Connect effortlessly using integrated wireless and NMEA 2000 technology.
Showing 312/2005
Next