Above $1000

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 9 x 12

The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. 

Features:

• All Tabs sealed with a corrosive resistant epoxy coating
• Equivalent strength to 10 gauge stainless steel
• "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm)
• Boat Length - 16' to 25' (5 to 7.5 M)
• Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Aluminum Alloy tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Aluminum Alloy
• Box Dimensions: 2"H x 4"W x 6"L WT: 14.15 lbs

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 18 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
• Boat Length - 20' to 40' (6 to 12 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit 

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 2"H x 4"W x 6"L WT: 27.05 lbs

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 12 x 12 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications:

• Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm)
• Boat Length - 18' to 32' (5.5 to 9.5 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 2"H x 4"W x 6"L WT: 19.25 lbs

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 24 

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. 

Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. 

Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. 

The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Features:

• Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
• Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
• Utilizes internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Quiet operation
• Actuators are fully load tested to push 1000 lbs of force
• Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water

Technical Specifications: 

• Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm)
• Boat Length - 24' to 37' (7 to 11 M)
• Trim Tab Material - 12 gauge, 304 Stainless Steel 
• Actuator DC Voltage - 12 V
• Actuator Stroke Length - 2.25" (57 mm)
• Actuator Cable Length  - 23' (7 M)
• Actuator Vertical Height - 11.875" (302 mm)
• Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
• Control Mounting Hole Cutout - 2" (50 mm)
• Control Operating Voltage - 12 or 24 V

In the Box:

• One (1) Automatic Leveling Control
• Two (2) Stainless Steel tabs
• Two (2) actuators w/23' (7 M) cables
• Instruction Manual 

*Sold as a Kit

Specifications:

• Actuator Type: Electro-Mechanical
• Construction: Stainless Steel
• Box Dimensions: 2"H x 4"W x 6"L WT: 27.45 lbs

Photon Ultra Low-Light 4K Night Vision Camera with 12mm Lens - White

The ground-breaking Photon Ultra Hi-Def / Ultra Low Light Night Vision Camera from Iris, available in 12mm and 2.8mm lens options for long-range and wide-angle applications.

Photon uses state-of-the-art video processing technology combined with AI analytics to enhance its ultra high definition 4K (3840 x 2160) output, producing full color, real-time (25Hz) video in virtually pitch black conditions. Even in moonless skies, with just the faintest starlight, Photon’s cutting-edge processor analyzes each of its 8.3 million pixels, dynamically boosting and enhancing the output stream. 

In addition to the camera’s dynamic video processing, an integrated soft white LED illuminator is included to enhance visibility at short range. 

Designed to overcome the shortcomings of expensive thermal imaging cameras, Photon is not bound by strict export controls, doesn’t struggle in low thermal contrast scenarios, and isn’t affected by lead time issues accentuated by geopolitical conflicts.

The camera’s staggering ultra high definition output instantly adds value to leading chart-plotters offering 4K support, such as Garmin's superb 9000 series range. Even if your display can’t offer UHD, Photon can be configured to output video as required.

As the camera is powered via IEEE802.3af Power over Ethernet (PoE), installation couldn’t be simpler, requiring a single CAT5 cable, and just 4 drill holes (plus cable entry).

If you need to run at night and don’t want the hassle or price tag of a thermal camera, Photon takes the heat out of night vision and leads the way!  

Features:

• 4K Ultra Hi-Definition Resolution (3840 x 2160) – 8.3MP
• Ultra Low Light Operation - 0.0003 Lux
• Full Color Video in Starlight Conditions
• Remote Viewable
• Soft White LED Illumination for Enhanced Short Range Illumination / 100ft
• 12mm (long range) & 2.8mm (wide angle) Lens Options
• Power over Ethernet (PoE) IEEE802.3af
• Compatible with Leading Chart Plotters
• Available in All White / Matte Black & White & Black Mix
• Multiple Streams
• EN60945 EMC Compliant
• NDAA Compliant
• ONVIF Compliant
• Environmental Rating - IP67

Photon Ultra Low-Light 4K Night Vision Camera with 12mm Lens - Black

The ground-breaking Photon Ultra Hi-Def / Ultra Low Light Night Vision Camera from Iris, available in 12mm and 2.8mm lens options for long-range and wide-angle applications.

Photon uses state-of-the-art video processing technology combined with AI analytics to enhance its ultra-high definition 4K (3840 x 2160) output, producing full color, real-time (25Hz) video in virtually pitch black conditions. Even in moonless skies, with just the faintest starlight, Photon’s cutting-edge processor analyzes each of its 8.3 million pixels, dynamically boosting and enhancing the output stream. 

In addition to the camera’s dynamic video processing, an integrated soft white LED illuminator is included to enhance visibility at short range. 

Designed to overcome the shortcomings of expensive thermal imaging cameras, Photon is not bound by strict export controls, doesn’t struggle in low thermal contrast scenarios, and isn’t affected by lead time issues accentuated by geopolitical conflicts.

The camera’s staggering ultra high definition output instantly adds value to leading chart-plotters offering 4K support, such as Garmin's superb 9000 series range. Even if your display can’t offer UHD, Photon can be configured to output video as required.

As the camera is powered via IEEE802.3af Power over Ethernet (PoE), installation couldn’t be simpler, requiring a single CAT5 cable, and just 4 drill holes (plus cable entry).

If you need to run at night and don’t want the hassle or price tag of a thermal camera, Photon takes the heat out of night vision and leads the way!  

Features:

• 4K Ultra Hi-Definition Resolution (3840 x 2160) – 8.3MP
• Ultra Low Light Operation - 0.0003 Lux
• Full Color Video in Starlight Conditions
• Remote Viewable
• Soft White LED Illumination for Enhanced Short Range Illumination / 100ft
• 12mm (long range) & 2.8mm (wide angle) Lens Options
• Power over Ethernet (PoE) IEEE802.3af
• Compatible with Leading Chart Plotters
• Available in All White / Matte Black & White & Black Mix
• Multiple Streams
• EN60945 EMC Compliant
• NDAA Compliant
• ONVIF Compliant
• Environmental Rating - IP67

12V-24V DC 16 Amp Converter f/DRS25AX X-Class Open Array - Newmar

DC Converter 12V-24V 16 Amps

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sleipner eVision E350 48V E-Series Heavy Duty Tunnel Bow/Stern Thruster - 350kg Thrust | E350/300TC-HD