Above $1000

Zeus A275L N62 Alternator with Clutch Pulley & Terminal Block

The highest power output alternator in its size/class. 

Features:

• Engineered for High Energy Production.
• Suitable for Marine, RV, Military, and Commercial applications.
• Rapidly charges large battery banks.
• Coolest operating temperatures for increased performance.
• Runs 8 - 20% cooler than incumbent alternators due to: Heat shedding coatings, Rectifier located on housing exterior, Dual cooling fans, and OEM Components.
• It is optimized for performance at idle speeds.
• Reduces the need for a generator by creating additional power with your engine.
• Unleash peak performance with E-Coat/Cerakote. Our advanced coating absorbs less heat, keeping the A275L cooler. This translates to more amperage for sustained periods.
• Use an ARCO Zeus Bluetooth alternator regulator or lithium battery charging for maximum performance.
• SAE J1171 Certified.
• Made in the U.S.A.

Technical Specifications:

• Voltage - 12v
• Field Type - P
• Rotor Poles - 16
• Stator Size - 138mm
• Frame Size - Large
• Weight - 14.9 lbs/6.7 kg
• Regulation - External Only (These units will come with a terminal block and a P-Type harness. They will only work with an external regulator, such as an ARCO Zeus Bluetooth alternator regulator.) 
• Output Voltage - 14.1v (Default)
• Finish - (Black) Cerakote or E-coating
• Cut-In RPM - 1,061 Alternator RPM
• Maximum Alt RPM - 19,000
• Battery Post - M8 Thread Post, Side Mount
• Standard Pulley - 49K6 (6-groove, 49mm)
• Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5
• Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included)
• Diodes - 6 positive, 6 negative, 50A Rated, Avalanche
• Max Output (Cold, 9,000 RPM) - 311 Amps
• Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps
• Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps
• Max Continuous Operating Temperature - 110°C / 230°F

Mounting Application:

• Mercedes Sprinter 1999-2006 alternators, Mercedes Sprinter Factory dual alternator 2007-Up Replacement. Replaces Roadtrek Mercedes Dual alternator

2" x 50' Ocean-Flex Multipurpose Hose

This unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.

Provides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.

Specifications:

• Construction: Tube Black Nitrile, Cover Black Nitrile
• Reinforcement: Multiple Textile Spirals, Dual Steel Wire Helix
• Temperature Range: -20°F to 212°F (-29ºC to 100ºC)
• Lengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1/2” ID.)

Specifications:

• ID Diameter (inches): 2"
• Length (Feet): 50'
• Box Dimensions: 6"H x 31"W x 31"L WT: 38.5 lbs

X100 VHF with Class B AIS

**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required, along with the vessel master or owner's signature on the completed programming form. **

Click here to download the form.

X100 defines a new horizon of functionality, performance, and convenience in marine radio communications and navigation safety. Integrated DSC/VHF radio and high-powered AIS Class B combine with a range of innovative functionalities that make your boating safer and more convenient.

Engineered & Built for Boating Life

• Ruggedized, water and weather-proof
• CLEAR-WAVE digital audio processing
• The full-color direct-sunlight visible display
• WiFi and Bluetooth
• NMEA2000 and 0183
• Integrated GPS (external antenna optional)
• Integrated zero-loss VHF antenna splitter – only one antenna is required for both AIS and VHF
• Ergonomic, intuitive controls and UI
• Flush, desktop, ceiling mounting options

Outstanding Functionalities that Enhance Your Boating

• CONNECT-X - Transform your smartphone or smartwatch into a full-featured wireless command mic. You can use it to make and receive calls, monitor VHF/DSC, AIS traffic, and nav alerts anywhere on your boat.
• VHF/DSC – X100 is a certified Class DVHF/DSC marine radio with a full feature globally certified Class D VHF/ DSC radio.
• Chat to anyone on the boat using the Connect-X private intercom functionality.
• Enable the MOB function and be alerted to any connected device that leaves the boat.
• High-powered AIS that receives and transmits. Integrated navigation alerts allow you to go silent and stop transmitting when you want.
• Single system-wide phonebook for Vessel DSC, AIS & On-board Intercom for consistent communication by whatever means vessel-wide.
• Wi-Fi Access Point mode is for standalone installation, and Station mode is for integration within existing vessel Wi-Fi infrastructure for a scalable solution that will meet the needs of solo mariners on small boats to medium to large motor yachts and sailing vessels.
• Streaming of all received AIS data to navigation apps on tablets and phones over Wi-Fi to easily integrate 3rd party navigation apps into your system.
• Autoset DSC “Nature of Distress” when in a MOB situation for the quicker triggering of DSC distress following a MOB situation.
• Initiation of DSC calling from Phonebook, AIS List/Plot, or via direct entry of MMSI to make using DSC much more convenient, quicker, and feature-rich without having to enter MMSI numbers directly.

Advanced Features for Enhanced Safety & Communication:

• VHF/DSC
• Wireless Command-Mic
• AIS
• Private Intercom
• MOB
• One Touch Calling

CONNECT-X Turns Your Phone into a Radio Command Mic

With the powerful yet free CONNECT-X app, you can wirelessly connect up to 10 mobile devices and turn them into full-function mobile radio command mics, allowing you to manage communication, navigation, and emergency functions from anywhere onboard.

Free CONNECT-X App

• Respond immediately to emergencies with instant MOB alerts and recovery locations, as well as CPA, anchor drift, and inbound DSC messages.
• Maintain full control over VHF communications from any location on the vessel.
• Privately intercom crew and PA throughout the vessel and loudhail other vessels nearby.

Specifications:

• AIS: Yes
• Built-In GPS: Yes
• Color: Black
• Hailer: No
• Intercom Capability: No
• NMEA 2000: Yes
• Box Dimensions: 4"H x 12"W x 13"L WT: 5.8 lbs
• UPC: 676796011638

PRO Evo3 - 24V - 60A

This range of Marine Battery Chargers is the result of the latest technological advancements in the world of power electronics. By comparison to the Dolphin Pro Chargers, an additional DC output has been added while reducing the overall dimensions by 16% (12v/90a, 24v/40a, 24v/60a) and 30% (24v/100a). 

They are more compact and 30-60% lighter (9 lbs.) offering the highest power-to-space ratio on the market! With 4 independent isolated DC outputs and NMEA 2000 communication, the Dolphin PRO Evo3 meets the demands of today’s leading boat builders and modern electrical systems.

Features:

• Ultra-compact and lightweight - Thanks to the new electronics this new generation of product is 30 to 60% lighter than the previous one. The weight of the 24-volt 100-amp unit is just under 9 Lbs.
• 4 Independent isolated outputs - All PRO EVO3 offer 4 independent isolated DC outputs. It allows to simplification of the charging system consisting of several battery banks.
• NMEA 2000 - NMEA 2000 plug-and-play communication skills. All PRO EVO3 chargers feature CAN communication ports including certified N2K port with latest PGEN.
• High-Efficiency DSP technology - PRO EVO3 Chargers deliver full power even at very high temperatures (up to 50°C/122°F). This "no derating" feature is unique on the market.
• Selectable Battery Chemistries - 8 Selectable charging profiles including Lead Acid, Gel, AMG, and Lithium-Ion batteries with temperature compensation.
• Ignition Protected - PRO EVO3 12.90 is now ISO 8846 and SAE J1171 certified.

PRO Evo3 - 24V - 40A

This range of Marine Battery Chargers is the result of the latest technological advancements in the world of power electronics. By comparison to the Dolphin Pro Chargers, an additional DC output has been added while reducing the overall dimensions by 16% (12v/90a, 24v/40a, 24v/60a) and 30% (24v/100a). 

They are more compact and 30-60% lighter (9 lbs.) offering the highest power-to-space ratio on the market! With 4 independent isolated DC outputs and NMEA 2000 communication, the Dolphin PRO Evo3 meets the demands of today’s leading boat builders and modern electrical systems.

Features:

• Ultra-compact and lightweight - Thanks to the new electronics this new generation of product is 30 to 60% lighter than the previous one. The weight of the 24-volt 100-amp unit is just under 9 Lbs.
• 4 Independent isolated outputs - All PRO EVO3 offer 4 independent isolated DC outputs. It allows to simplification of the charging system consisting of several battery banks.
• NMEA 2000 - NMEA 2000 plug-and-play communication skills. All PRO EVO3 chargers feature CAN communication ports including certified N2K port with latest PGEN.
• High-Efficiency DSP technology - PRO EVO3 Chargers deliver full power even at very high temperatures (up to 50°C/122°F). This "no derating" feature is unique on the market.
• Selectable Battery Chemistries - 8 Selectable charging profiles including Lead Acid, Gel, AMG, and Lithium-Ion batteries with temperature compensation.
• Ignition Protected - PRO EVO3 12.90 is now ISO 8846 and SAE J1171 certified.

Marine Battery Charger 115/230V Input 12VDC - 60A - 3-Bank

Sentry SFR Ferroresonant series marine battery chargers are in an elite class, setting the standard for dependable battery chargers. Sentry chargers are designed to operate for decades in the harsh marine environment. They are completely field serviceable and come with a 2-year parts and labor warranty.

Features:

• Available in 12vdc, 24vdc and 32vdc models
• Completely charge the battery and turn off to prevent overcharging
• Ignition protected to allow engine room installations
• Charging outputs for Lead-Acid, Optional AGM, Gel, and Lead Calcium

Specifications:

• Charger Input - Voltage: 115/230v
• Charger Output - Amps: 60a
• Charger Output Voltage: 12vdc
• Charging Banks: 3
• Portable: No
• Box Dimensions: 10"H x 20"W x 20"L WT: 39.6 lbs
• UPC: 850046155918

Grand Slam 860 Electric VHF Antenna Mount

The Grand Slam 850 Electric VHF Antenna Mount! Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. 

Features:

• Standard 1”-14 thread (male) shaft to accept standard VHF antennas up to 8'
• No under-mount clearance required
• Machined / Anodized aluminum body with a light brushed finish
• Threaded shaft for consistent lift and descent
• Brass bearings for smooth operation
• Features breakaway pin for manual operation
• Includes 6” lead of 20-gauge wire from the base
• 12-volt DC power supply for lift and descent
• Accepts 3A fuse in the main +12 VDC power feed (not included)
• Pairs with Backing Plate (BP-0850AEY), which is sold separately
• Pairs with 6º Wedge Plate (WP-850-950), which is sold separately
• Sold individually
• Made in the USA
• 1-year limited warranty

100A Buck-Boost DC-DC Converter

DC-DC Converter for charging a 12/24V service battery in vehicles with an intelligent dynamo. 

The Buck-Boost DC-DC Converter is a DC-DC converter that charges a 12/24V service battery in vehicles with an intelligent dynamo. Since these dynamos (powered by the onboard electronics of Euro 5 and 6 engines) do not always emit the correct charging current when the engine is running, a DC-DC converter is essential for charging the service battery properly.