Above $1000

Provides 1800 watts of sine wave AC power from a DC source

Offering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.

Product Features

• 1800 watt inverters (2900 watt surge capability)
  
• True sine wave AC output (crystal controlled)
  
• Removable LCD display can be mounted remotely for control and monitoring
  
• Unique DC terminals offer 180-degree connections for easy installation in tight places
  
• Powersave mode draws only 1.5 watts under no load
  
• Two year warranty

• Over temperature shutdown and automatic overload protection
  
• Over voltage and under voltage protection
  
• Short circuit and AC backfeed protection

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• DC Connection Type: Hardwire
• GFCI: Yes
• Outlet Qty: 1 Duplex GFCI
• Inverter Surge Rating: 2000w
• Waveform: True Sine Wave
• Inverter Input Voltage: 12v
• Inverter Output Voltage: 120v
• AC Connection Type: Hardwire
• Inverter Cont. Output Wattage: 1800w
• Box Dimensions: 8"H x 14"W x 19"L WT: 19.4 lbs
• UPC: 715535618001

Type 2 Pump 12Volt

Reversing hydraulic pump for use with steering systems equipped with 9.821 cubic inch (160-350cc) hydraulic steering rams. Compatible with 400 Series corepacks.

Designed for boats with existing hydraulic steering systems.

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 4"H x 4"W x 6"L WT: 7.6 lbs
• UPC: 023193811215

Type 1 Pump 12volt
Reversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams.

The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive's capacity when used with each corepack

Corepack Used S1 or S1G

Ram Capacity 4.9in - 10.5in
(80CC-172CC)
Maximum Stall
Pressure at 12V 750psi (50bar)


(no load) 67in/min (1000cc/min)



Corepack Used S2 or S2G

Ram Capacity 4.9in - 14in
(80cc - 230cc)
Maximum Stall
Pressure at 12V 750psi (50bar)

Peak Flow Rate
(no load) 67in/min (1000CC/min)

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 4"H x 5"W x 10"L WT: 5.6 lbs
• UPC: 023193811208

Premium Plus Quad Mercury Engine Keyless Ignition with Keyless Stop/Start, Remote Stop/Start, Ecos Rem Trim/Tilt

CoastKey Premium Plus for Mercury is a full-fledged wireless system with remote-controlled Start/Stop and remote-controlled Trim/Tilt in addition to a wireless lanyard function. In addition to the control box, cables, and Start Panel (which is mounted at the steering position), the system is equipped with a 5-button wireless remote-control FOB. In addition to the benefits of using the Start Panel (described under BASIC below), the FOB can be used to switch on the ignition and start and stop the engine wirelessly. When you have the FOB with you, it is not necessary to enter the PIN code to unlock the panel (although you can always start the engine that way).

By wearing the FOB at all times, the boat operator is secured with one of the market’s best wireless lanyard systems, which ensures that the boat stops if you fall overboard.

With Premium Plus, you also have the option to remotely control two extra functions, for example, Trim-Tilt and Windlass. Handy when you get to the boat and can stand on the jetty and tilt down the engine, and start it before getting on board and casting off. This is also useful when launching with a boat trailer.

Features:

• Keyless Start
• Start Panel
• Engine Box
• Plug & Play Cable
• Wireless Lanyard
• Wireless Start/Stop
• Wireless Function Aux 1
• Wireless Function Aux 2

CoastKey is installed instead of, or in parallel with the existing ignition key and you can still use the existing lanyard cord.

CoastKey Basic is the basic version of CoastKey. In addition to the control box and cables, it consists of a Start Panel which is mounted at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key. 

If you have a newer Mercury brand engine, installation is incredibly easy. The CoastKey Start Panel fits right into the same hole as the ignition switch and the connectors on the included cable fit right into the existing wiring harness. Truly PLUG & PLAY.

Premium Plus Triple Mercury Engine Keyless Ignition with Keyless Stop/Start, Remote Stop/Start, Ecos Rem Trim/Tilt

CoastKey Premium Plus for Mercury is a full-fledged wireless system with remote-controlled Start/Stop and remote-controlled Trim/Tilt in addition to a wireless lanyard function. In addition to the control box, cables, and Start Panel (which is mounted at the steering position), the system is equipped with a 5-button wireless remote-control FOB. In addition to the benefits of using the Start Panel (described under BASIC below), the FOB can be used to switch on the ignition and start and stop the engine wirelessly. When you have the FOB with you, it is not necessary to enter the PIN code to unlock the panel (although you can always start the engine that way).

By wearing the FOB at all times, the boat operator is secured with one of the market’s best wireless lanyard systems, which ensures that the boat stops if you fall overboard.

With Premium Plus, you also have the option to remotely control two extra functions, for example, Trim-Tilt and Windlass. Handy when you get to the boat and can stand on the jetty and tilt down the engine, and start it before getting on board and casting off. This is also useful when launching with a boat trailer.

Features:

• Keyless Start
• Start Panel
• Engine Box
• Plug & Play Cable
• Wireless Lanyard
• Wireless Start/Stop
• Wireless Function Aux 1
• Wireless Function Aux 2

CoastKey is installed instead of, or in parallel with the existing ignition key and you can still use the existing lanyard cord.

CoastKey Basic is the basic version of CoastKey. In addition to the control box and cables, it consists of a Start Panel which is mounted at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key. 

If you have a newer Mercury brand engine, installation is incredibly easy. The CoastKey Start Panel fits right into the same hole as the ignition switch and the connectors on the included cable fit right into the existing wiring harness. Truly PLUG & PLAY.

Premium Plus Twin Mercury Engine Keyless Ignition with Keyless Stop/Start, Remote Stop/Start, Ecos Rem Trim/Tilt

CoastKey Premium Plus for Mercury is a full-fledged wireless system with remote-controlled Start/Stop and remote-controlled Trim/Tilt in addition to a wireless lanyard function. In addition to the control box, cables, and Start Panel (which is mounted at the steering position), the system is equipped with a 5-button wireless remote-control FOB. In addition to the benefits of using the Start Panel (described under BASIC below), the FOB can be used to switch on the ignition and start and stop the engine wirelessly. When you have the FOB with you, it is not necessary to enter the PIN code to unlock the panel (although you can always start the engine that way).

By wearing the FOB at all times, the boat operator is secured with one of the market’s best wireless lanyard systems, which ensures that the boat stops if you fall overboard.

With Premium Plus, you also have the option to remotely control two extra functions, for example, Trim-Tilt and Windlass. Handy when you get to the boat and can stand on the jetty and tilt down the engine, and start it before getting on board and casting off. This is also useful when launching with a boat trailer.

Features:

• Keyless Start
• Start Panel
• Engine Box
• Plug & Play Cable
• Wireless Lanyard
• Wireless Start/Stop
• Wireless Function Aux 1
• Wireless Function Aux 2

CoastKey is installed instead of, or in parallel with the existing ignition key and you can still use the existing lanyard cord.

CoastKey Basic is the basic version of CoastKey. In addition to the control box and cables, it consists of a Start Panel which is mounted at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key. 

If you have a newer Mercury brand engine, installation is incredibly easy. The CoastKey Start Panel fits right into the same hole as the ignition switch and the connectors on the included cable fit right into the existing wiring harness. Truly PLUG & PLAY.

Standard Quad Mercury Engine Keyless Ignition with Keyless Stop/Start, Remote Stop/Start, & Ecos

CoastKey Standard for Mercury is a full-fledged wireless system with remote Start/Stop in addition to a wireless lanyard function. In addition to the control box, cables, and Start Panel (which is mounted at the steering position), the system is equipped with a 2-button wireless remote-control FOB. In addition to the benefits of using the Start Panel (described under Basic below), the FOB can be used to switch on the ignition and start and stop the engine wirelessly. When you have the FOB with you, it is not necessary to enter the PIN code to unlock the panel (although you can always start the engine that way).

By wearing the FOB at all times, the boat operator is secured with one of the market’s best wireless lanyard systems, which ensures that the boat stops if you fall overboard.

Features:

• Keyless Start
• Wireless Start/Stop
• Wireless Lanyard
• Start Panel
• Engine Box
• Plug & Play Cable

CoastKey Basic is the basic version of CoastKey. In addition to the control box and cables, it consists of a Start Panel which is mounted at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key. The obvious advantage of this solution is that you have keyless access to the boat and if there are several people using the boat, everyone has the same access without having to have their own keys. It is easy to change the PIN code to restrict access, for example after renting out the boat.

If you have a newer Mercury brand engine, installation is incredibly easy. The CoastKey Start Panel fits right into the same hole as the ignition switch and the connectors on the included cable fit right into the existing wiring harness. Truly PLUG & PLAY.

Standard Triple Mercury Engine Keyless Ignition with Keyless Stop/Start, Remote Stop/Start, & Ecos

CoastKey Standard for Mercury is a full-fledged wireless system with remote Start/Stop in addition to a wireless lanyard function. In addition to the control box, cables, and Start Panel (which is mounted at the steering position), the system is equipped with a 2-button wireless remote-control FOB. In addition to the benefits of using the Start Panel (described under BASIC below), the FOB can be used to switch on the ignition and start and stop the engine wirelessly. When you have the FOB with you, it is not necessary to enter the PIN code to unlock the panel (although you can always start the engine that way).

By wearing the FOB at all times, the boat operator is secured with one of the market’s best wireless lanyard systems, which ensures that the boat stops if you fall overboard.

Features:

• Keyless Start
• Wireless Start/Stop
• Wireless Lanyard
• Start Panel
• Engine Box
• Plug & Play Cable

CoastKey Basic is the basic version of CoastKey. In addition to the control box and cables, it consists of a Start Panel which is mounted at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key. The obvious advantage of this solution is that you have keyless access to the boat and if there are several people using the boat, everyone has the same access without having to have their own keys. It is easy to change the PIN code to restrict access, for example after renting out the boat.

If you have a newer Mercury brand engine, installation is incredibly easy. The CoastKey Start Panel fits right into the same hole as the ignition switch and the connectors on the included cable fit right into the existing wiring harness. Truly PLUG & PLAY.