Above $1000

AC Main + 6 Positions / DC Main + 18 Positions

Installed AC Breakers

• 120V AC
  
• 12/24V DC
  
• All AC and DC buses installed and fully pre-wired
  
• Label backlighting pre-installed
  
• ON - indicating LEDs installed in all circuit positions
  
• 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch
  
• Maximum panel amperage - 100 Amperes AC, 50 Amperes DCMIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance
  
• Two-part polyurethane slate gray finish
  
• Heavy 1/8" aluminum 5052 alloy
  
• Detailed installation instructions and cutout template included
  
• Countersunk mounting holes throughout
  
• Includes set of 60 common AC and DC Large Format Labels
  
• Over 500 individual labels available

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Voltage: 120/12/24v
• Max Breaker Quantity: 6 AC / 18 DC
• AC/DC: AC
• Box Dimensions: 7"H x 15"W x 22"L WT: 10.3 lbs
• UPC: 632085084080

Furuno CA200B-12H Rubber Coated Transducer, 5kW (No Plug) [CA200B-12H]

Ships Direct From Manufacturer

 Rubber Coated Transducer, 5kW (No Plug)

• 5 kW
  
• 200 kHz
  
• 4 degree Beam Angle
  
• 11 lbs.
  
• Rubber Coated - Tank Mounted
  
• 15-Meter Cable, no connector provided

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Temperature: No
• Speed Included: No
• Box Dimensions: 10"H x 10"W x 12"L WT: 10.6 lbs

Quick Guide (pdf)

Bennett Trim Tab Kit 54" x 12" w/o Control [5412]

Ships Direct From Manufacturer

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.

Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

Standard Trim Tab Kit
Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Actuator Type: Hydraulic
• Box Dimensions: 5"H x 14"W x 14"L WT: 69.8 lbs

Quick Guide (pdf)
Owner's Manual (pdf)

Bennett Trim Tab Kit 66" x 12" w/Euro Rocker Switch [6612E]

Ships Direct From Manufacturer

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.

Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

Standard Trim Tab Kit
Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Actuator Type: Hydraulic
• Box Dimensions: 5"H x 7"W x 9"L WT: 189.4 lbs
• UPC: 666285138601

Quick Guide (pdf)
Owner's Manual (pdf)

Bennett Trim Tab Kit 72" x 12" w/12V Dual Actuators, No Control Switch [7212]

Ships Direct From Manufacturer

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.

Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

Standard Trim Tab Kit
Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Actuator Type: Hydraulic
• Box Dimensions: 5"H x 15"W x 72"L WT: 97 lbs
• UPC: 666285139509

Quick Guide (pdf)
Owner's Manual (pdf)

476 18.5' Classic VHF Antenna

*THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS

The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically.

Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore.

Features:

• Brass and copper elements provide a standard range and reception
• Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install
• Smooth, durable, high-gloss white/fiberglass finish prevents yellowing
• VSWR of <1.5:1 at 156.8 MHz
• Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below*
• 2-year warranty

Specifications:

• Frequency: VHF Marine band
• Bandwidth: (within 2.0:1 SWR): 10 MHz
• SWR: 1.5:1 at 156.8 MHz
• Impedance (ohms): 50 ohms
• Gain: 10 dB
• Max Input (Watts): 350W
• DC Ground: Yes - Read Shorted
• Termination: SO-239 connector
• Height (feet): 18.5'
• Polarization: Vertical
• Radiation Pattern: Omni-directional
• Suggested Mount: 483 Mast Bracket

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Antenna Band: VHF
• Color: White
• Construction: Fiberglass
• Ferrule Type: Aluminum
• Length (Inches): 222"
• Box Dimensions: 3"H x 3"W x 252"L WT: 40 lbs
• UPC: 719441100063

Ritchie SP-5-B GlobeMaster Compass - Pedestal Mount - Black - 5 Degree Card 12V [SP-5-B]

Ships Direct From Manufacturer

Features:

• 5″ (127 mm) Open Face Dial
• Choice of 2 Degree, 2 Degree with Points or 5 Degree Dial
• Brushed Stainless Steel or Black Wrinkle Finish
• Easily Installed
• Ideal for both Power and Sailboats
• Lightweight/Easy-to-Align Mounting Base Fits all Popular Sailboat Pedestals
• 45 and 90 Degree Lubber Lines for Easy Reading
• Full Internal Gimbals
• 12V Green LED lighting Standard
• Built-in Compensators
• Weather Shield Available – Model No. WS-P
• 100% Repairable
• Exclusive 5-Year Ritchie Warranty

Approx. Shipping Weight: 6lbs (2.72 kg)

Notes:

12v lighting standard - 24 & 32v lighting options are available.

This compass conforms with ISO 10316(E) and ISO 613:2000(E) standards.

Specifications:

• Lubber Lines: Yes
• Mounting Style: Pedestal
• Read: Rear
• Backlight: Yes
• Box Dimensions: 9"H x 10"W x 11"L WT: 5.9 lbs
• UPC: 010342050458

Quick Guide (pdf)
Owner's Manual (pdf)

Bennett Trim Tab Kit 60" x 12" w/o Control [6012]

Ships Direct From Manufacturer

Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.

Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

Standard Trim Tab Kit
Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

• Construction: Stainless Steel
• Actuator Type: Hydraulic
• Box Dimensions: 6"H x 15"W x 66"L WT: 60.86 lbs
• UPC: 666285137505

Quick Guide (pdf)
Owner's Manual (pdf)