Above $1000

Lee's 1.75" Flush Mount Skiff Series Outrigger Holder [OH2016F]

Ships Direct From Manufacturer

Gunnel Mount Outrigger Holders

OH2016S

Size: 1.75"
Dimensions: 3 1/2 x 6

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Construction: Stainless Steel/Brass
• Diameter (Inches): 1-3/4"
• Finish: Polished/Chrome
• Mounting Style: Gunwale
• Product Class: Mounting Brackets
• Box Dimensions: 5"H x 14"W x 16"L WT: 15.6 lbs
• UPC: 096811201606

Lee's Junior Outrigger Holders 2" x 18" Main Tube [OH226S]

Ships Direct From Manufacturer

The Original Wishbone Outrigger Holder

The Original Wishbone Style Outrigger Holder has been in production for over 45 years. Setting the standard for the industry, our "Junior" outrigger holder has often been imitated, but never equaled. Its ease of operation, adjustable fishing angle, ability to lay down for bridges and small footprint makes it the ideal holder for a multitude of boats.

Durability was the watchword at its conception. You won't find plastic parts in this holder. Constructed of heavy duty brass forgings, heavy wall brass pipe and a stainless steel main tube, it epitomizes strength and reliability. The three point mounting system provides maximum strength and distributes the stress to the mounting surface over a wide area. This holder can be mounted vertically or angled toward the stern. Somewhere between twenty to thirty five degrees is normal.

Model OH226S is for use with our deluxe 19ft. single spreader poles and non-spreader poles up to 22ft.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Construction: Stainless Steel
• Diameter (Inches): 2.0"
• Finish: Polished
• Mounting Style: Side
• Product Class: Mounting Brackets
• Box Dimensions: 6"H x 11"W x 23"L WT: 22 lbs
• UPC: 096811222601

Quick Guide (pdf)

Raymarine 1kW 20 Degree Tilted Element Transducer [A102113]

Ships Direct From Manufacturer 

B164 Tilted Element™

20 degree titled version is designed for 16 degree - 24 degree deadrise angles.

for use with Raymarine DSM250, DSM300 sounder modules

Features:

• Depth/Temp
  
• 50/200 kHz
  
• 1 kW RMS
  
• High-performance
  
• Bronze

Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.

Specifications:

• Imaging: Standard
• Chirp: No
• Cable Length (Feet): 30'
• Temperature: Yes
• Speed Included: No
• Mounting Style: Thru-Hull
• Box Dimensions: 8"H x 11"W x 12"L WT: 12 lbs
• UPC: 091975000737

Owner's Manual (pdf)
Brochure (pdf)

Lee's 2" Flush Mount Skiff Series Outrigger Holder [OH219F]

Ships Direct From Manufacturer

Gunnel Mount Outrigger Holders

Size: 2.0"
Dimensions: 4 x 6 1/2

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Construction: Brass
• Diameter (Inches): 2.0"
• Finish: Chrome
• Mounting Style: Gunwale
• Product Class: Mounting Brackets
• Box Dimensions: 6"H x 11"W x 22"L WT: 21.6 lbs
• UPC: 096811221901

Lee's 18.5' Bright Silver MKII Outrigger Poles 2" OD [AP3519]

Ships Direct From Manufacturer

18.5' Bright Silver Finish - MKII Outrigger Poles 

Specifications:

• Construction: Anodized Aluminum
• Diameter (Inches): 2"
• Finish: Silver
• Length (Feet): 18-1/2'
• Box Dimensions: 5"H x 7"W x 51"L WT: 14 lbs
• UPC: 096811351905

Raymarine 1kW 0 Degree Tilted Element Transducer [A102137]

Ships Direct From Manufacturer 

B164 Tilted Element™

0°

Features:

• Depth/Temp
  
• 50/200 kHz
  
• 1 kW RMS
  
• High-performance
  
• Bronze

Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.

Specifications:

• Temperature: Yes
• Speed Included: No
• Mounting Style: Thru-Hull
• Imaging: Standard
• Chirp: No
• Cable Length (Feet): 30'
• Box Dimensions: 8"H x 11"W x 12"L WT: 10.5 lbs
• UPC: 919750043604

Owner's Manual (pdf)
Brochure (pdf)

Raymarine Type 3 Hydraulic Linear - 12V [M81202]

Ships Direct From Manufacturer 

Type 3 Hydraulic Linear - 12V 

Type 3 Hydraulic Linear system for mechanically steered vessels up to 77,000lb (35,000kg) displacement.

The hydraulic linear drive system is designed for boats with existing mechanical steering systems, not hydraulic steering systems. It provides a totally isolated autopilot steering system consisting of:

Features:

• Hydraulic ram: a self-contained autopilot steering cylinder with a load limiting system and a built in clutch (to allow friction-free steering when the autopilot is not in use)
• Reversing hydraulic pump: powers the hydraulic ram
• Hydraulic fluid reservoir: supplies hydraulic fluid to the system

Specifications:

• Type: Pumps/Drives
• Box Dimensions: 12"H x 13"W x 32"L WT: 27.9 lbs
• UPC: 023193812021

Lee's 22' Bright Silver Outrigger Poles - Fit OH219F & OH2020S Only [AP3722SK]

Ships Direct From Manufacturer

AP3722SK

22' Bright Silver Finish
2"OD x 1.750"ID

Works With 2" Skiff Style Holders

• OH219F
  
• OH2020S

Specifications:

• Construction: Anodized Aluminum
• Diameter (Inches): 2"
• Finish: Silver
• Length (Feet): 22'
• Box Dimensions: 5"H x 7"W x 51"L WT: 18 lbs
• UPC: 096811372207