1926 products
Sort by:
1926 products
ANDERSEN 28ST Compact Above Deck Electric FS Winch Variable Speed - 24V [RA2028015200]
ANDERSEN 28ST Compact Above Deck Electric FS Winch Variable Speed - 24V [RA2028015200]
Ships Direct From Manufacturer
28ST Compact Above Deck Electric Full Stainless Winch Variable Speed - 24V
Andersen Compact Motor™ electric winches allow you to hoist and trim sails at the push of a button regardless of physical strength, so any crew member can easily and safely trim sails and control lines.
Ease of installation
The Andersen Compact Motor™ electric winch is available in two formats for either Above Deck or Below Deck motor placement. Motor gearbox and controller are integrated into one compact unit with no extra control box necessary. Simplified electrical installation requires just the connection of positive and negative power cables to the motor terminals and the connection of the push button using the included output cable.
Efficient, variable speed
The Andersen Compact Motor™ is a brushless DC motor carefully matched to a low profile planetary gearbox which requires less space for installation, and draws considerably less current than traditional motor/gearbox configurations. Available in 12 volt and 24 volt models, Compact Motor™ electric winches operate at variable speed in proportion to the pressure applied to the push button, for smooth and quiet operation.
Illuminated "intelligent" push button
Compact Motor™ winches are supplied with a push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67. The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.
Built-in protection
- Integrated overload protection - The controller is pre-set to stop the winch if the maximum pull load is exceeded. Operation can resume within a few seconds when the load returns below the limit.
- Thermal overload protection - The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.
Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor? Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.
Specifications
- Drum: 2-3/4 in. (70 mm)
- Base: 4-15/16 in. (125 mm)
- Height: 5-13/16 in. (147 mm)
- Line Entry: 5-15/16 in. (151 mm)
- Line Size: 5/16-9/16 in. (8-14 mm)
- Weight: 35.3 lbs. (16 kg)
- Max Deck Thickness: 1-3/4 in. (45 mm)
- Motor Height: 3-3/8 in. (85 mm)
- Motor: 7-7/8 in. (200 mm)
- Motor Depth: 1-9/16 in. - 2-15/16 in. (40 mm -75 mm)
Taylor Made Stow n Go Dock Box - 24" x 85" x 22" - Large [83551]
Ships Direct From Manufacturer
Stow 'n Go Dock Box - 24" x 85" x 22" - Large
With a UV gelcoat finish and the stainless steel lockable latch and hardware these are built tough. Our dock boxes incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas and allows for a slower, more controlled closing. These fiberglass molded dock boxes are also constructed with a smooth interior finish which helps prevent splinters in your hands when storing or retrieving your boating accessories.
Raymarine M265LH 1kW Urethane In-Hull Transducer w/In-Hull Mounting Kit [A80012]
Raymarine M265LH 1kW Urethane In-Hull Transducer w/In-Hull Mounting Kit [A80012]
Ships Direct From Manufacturer
M265LH 1kW Urethane In-Hull Transducer with In-Hull Mounting Kit
The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of deadrise angles. The medium-frequency benefits include the ability to identify targets deeper than the high-frequency with benefit of a wider beam angle. The high frequency provides excellent shallow water resolution.
Specifications:
- Temperature: No
- Speed Included: No
- Mounting Style: In-Hull
- Imaging: Standard
- Chirp: Low/High
- Box Dimensions: 8"H x 10"W x 11"L WT: 11.9 lbs
- UPC: 723193706244
ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/46ST Winch - 12V [RA2046211300]
ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/46ST Winch - 12V [RA2046211300]
Ships Direct From Manufacturer
E1 Single Speed Electric Motor Conversion Kit for 46ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 46ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
Garmin Panoptix LVS32-TH Transducer Thru-Hull Mount [010-12928-01]
Ships Direct From Manufacturer
Panoptix™ LVS32-TH Transducer Thru-Hull Mount
This transducer is part of the Panoptix LiveScope System and requires the GLS 10 sonar black box to function. You get both LiveScope™ Down and LiveScope™ Forward modes in one transducer. It’s easy to adjust the transducer mode to fit your fishing techniques; use LiveScope Forward to see remarkably clear images of structure and swimming fish around your boat, and use LiveScope Down to see directly below your boat. The view automatically updates on your compatible Garmin chartplotter. Attitude Heading Reference System (AHRS) stabilization keeps your sonar view steady, even in rough conditions.
Specifications:
- Mounting Style: Thru-Hull
- Box Dimensions: 5"H x 10"W x 15"L WT: 6.7 lbs
- UPC: 753759230746
Pressure Storage Tank - 6.2 Gallon Drawdown
A pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump.
Specifications:
- Diameter: 15"
- Mounting: Stand
- 30/50 Drawdown: 6.2 gallon
- Thread NPT: 3/4"
K Series Electric Marine Toilet - 12V
Features:
- House-size bowl
- 3" piston pump mechanism
- Adjustable flow up to 4 GPM
- All bronze pump
- Electric or hand operated models are available
- Electric models operate by touch of a button and are quickly converted to hand operation by removing one easily accessible bolt
- For installation above or below the waterline; foot pedal water control allows the desired amount of flush water to be used and automatically shuts the water inlet off when the foot pedal is released
- No valves to close or hand wheels to turn
Specifications:
- Volts: 12v
- Color: White
- Operation Method: Electric
- Gallons Per Minute: 4 GPM
- Size: Household Size
- Type: Toilet
- Box Dimensions: 21"H x 21"W x 24"L WT: 62 lbs
- UPC: 742985062351
Commercial Duty Reversing Vane Pump - 12V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. Ignition protected motor, #316 stainless steel shaft, and reversing (R). SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.
Specifications:
- Self Priming: YES
- Thread NPT: 1/2" + Garden Hose Adaptor
- Control Type: Pump Mounted Reversing Switch
- Max GPM: 7
- Breaker DC: 30 Amp
Showing 1304/1926
Next