Outrigger Sets & Vessel Hardware Above 1000

Victron Energy

Victron Quattro Inverter/Charger 48 VDC - 10,000W - Dual 100AMP 120V AC Inputs - Auto Transfer Switch - 140AMP Battery Charger - Stackable [QUA483100100]

~~$3,228.00~~$2,743.80

Victron Quattro Inverter/Charger 48 VDC - 10,000W - Dual 100AMP 120V AC Inputs - Auto Transfer Switch - 140AMP Battery Charger - Stackable [QUA483100100]

THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS

Features:

Two AC Inputs & two AC Outputs - The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Unique PowerAssist feature - The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Virtually unlimited power thanks to parallel operation -Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
Remote Monitoring and Control - Monitor and control your MultiPlus and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more...

Warranty Info

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Please contact your dealer for any returns, repairs or support issues related to this product.

Specifications:

Outlet Qty: None
Inverter Output Voltage: 120v
Inverter Input Voltage: 38-66v
Inverter Cont. Output Wattage: 10000w
Charger Output Voltage: 48v
Charger Output - Amps: 140a
Charger Input - Voltage: 94-140v
Charging Banks: 1
Box Dimensions: 24"H x 25"W x 28"L WT: 180 lbs
UPC: 8719076044246

Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)

T-H Marine Supplies

T-H Marine ATLAS 12" Set Back Hydraulic Jack Plate - Heavy Duty - Black [AHJ-12VHD-B-DP]

~~$2,399.99~~$2,175.99

Furuno

Furuno 165T-50/200-TM260 Transducer f/DFF3D Transom Mount Combo [165T-50/200-TM260]

$2,300.00

Rupp Marine

Rupp Z-30 Top Gun Bolt-in Outrigger Holders [A0-TPGN-Z30]

~~$1,999.00~~$1,834.99

ACR GlobalFix V5 Cat 1 GPS AIS EPIRB w/Return Link Service Mobile App [2851]

ACR Electronics

ACR GlobalFix V5 Cat 1 GPS AIS EPIRB w/Return Link Service Mobile App [2851]

~~$1,171.95~~$1,054.95

GlobalFix™ V5 Cat 1 GPS AIS EPIRB with Return Link Service & Mobile App

The ACR GlobalFix V5 EPIRB combines 406 MHz satellite connectivity with Automatic Identification System (AIS) functionality. This means that when the EPIRB is activated not only does it transmit your emergency signal to the global Cospas Sarsat satellite rescue system, but it broadcasts an AIS safety message on VHF-frequencies that can be seen immediately by any AIS-equipped vessel nearby. Other great features include Return Link Service (RLS) technology that provides visual confirmation to the user that their distress message has been received, a 121.5 MHz homing signal, and visible and infrared strobe lights for easy target identification at night or in poor visibility. Another feature is Near Field Communication (NFC) which allows users to monitor their EPIRB using a smartphone App. ACR is the global leader in marine safety and rescue technology and the GlobalFix V5 GPS EPIRB with AIS combines the durability and reliability they are known for with advanced technology designed to speed rescue response time.

Faster Rescues through the Pairing of Global and Local Rescue

The ACR GlobalFix V5 EPIRB accurately derives its position anywhere in the world using GNSS (GPS, Galileo, Glonass) positioning networks. Upon activation 406 MHz distress transmissions relay the GPS EPIRB (GPIRB) position, accurate to within 100 meters, to the worldwide Cospas Sarsat search and rescue satellite network. EPIRB identifiers and position information is relayed to ground stations through the satellite system initiating rescue operations. With advanced AIS technology now incorporated into the EPIRB, once activated an AIS signal is transmitted so that nearby vessels outfitted with an AIS transponder are instantly notified of the EPIRB location. AIS-equipped vessels within the VHF range of the EPIRB will see a safety message on their screens including MMSI vessel identification. Vessels in the area where the EPIRB has been activated can then start rescue and recovery operations immediately without having to wait for an emergency response from the applicable SAR authority. AIS also allows local responders to easily pinpoint the EPIRB’s location which is presented as an AIS target on their onboard display. Nearby vessels with onboard AIS can navigate directly to the EPIRB by selecting the AIS target. This incredible technological advancement will speed recovery times which is sure to save lives.

Smartphone Connectivity utilizing Near Field Communication (NFC)

NFC (Near Field Communication) technology allows users to access EPIRB diagnostics using their smartphones. When a smartphone is placed adjacent to the GlobalFix V5 EPIRB the ACR Product App automatically opens providing access to EPIRB data. Beacon status information in the app includes current battery life, number of self-tests completed, number of GNSS tests completed, and the amount of time the EPIRB has been activated. Detailed information on each self-test and GNSS test performed by the device is also available. GNSS tests show a map view pinpointing where the previous test was performed, the date and time of the test, how long it took the EPIRB to get a fix on the GNSS coordinates, the number of satellites used to obtain that fix, and the accuracy of the fix. Easy App connectivity with NFC allows users to easily check the status of all EPIRB functions to ensure it is working properly.

Return Link Service (RLS)

Return Link Service tells whoever triggers the EPIRB that the distress message has been delivered. An RLS signal sent back through the Galileo satellite network confirms that the distress message along with the precise beacon location and identifiers have been detected. An easy-to-see flashing blue light indicates the EPIRB’s successful reception of the Return Link message from the Galileo satellite network. The comfort of knowing rescuers are aware that an EPIRB has been activated and that they have its location helps reduce the stress associated with mayday situations.

ACR specializes in electronic rescue devices and other life-saving products designed for both professional and recreational mariners. With the addition of AIS, the innovative ACR GlobalFix V5 EPIRB provides the easiest and quickest path to rescue. Return Link Service provides a welcomed sense of security knowing that your distress message has been received and Near Field Communication provides access to data and product functionality that has never before been available to any EPIRB customer. The advanced feature set of the GlobalFix V5 EPIRB makes it perfect for mariners whether coastal cruising, working offshore, or crossing oceans.

Specifications:

Output Power (406/121.5): 406.040 MHz, 5W (nominal) / 121.5 MHz, 50mW (nominal)
AIS: Yes, AIS Alerts for Local Rescue
Return Link Service: Yes, Enabled RLS confirmation direct to beacon
NFC/Mobile App: Yes, Near Field Communication (NFC) and Mobile App Included
Strobe: White & Infrared Dual Technology
Size (antenna up) – Beacon Only: 18.5” x 4.3” x 4.36” (470 mm x 109 mm x 111 mm)
Weight – Beacon Only: 1.78 lbs (810 G)
Battery: Lithium battery, Li/FeS2
Battery Replacement: 10-year replaceable battery (replace 10 years after the date of manufacture or after activation)
GPS: 72 Channel Multi-constellation receiver (GPS, Galileo, & Glonass GNSS)
Activation: Out of bracket and wet, or manually in or out of the bracket
Waterproof: 33 ft (10 m) for 5 min.
Buoyant: Yes
Operational Life: 48 hours minimum @ -4°F (-20°C)
Deployment: Category I – Hydrostatic Release (auto deploy)
Warranty: 5 years
Approvals: Cospas-Sarsat/FCC/MED/MER Approved

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications: