{"title":"Electrical - Battery Management","description":null,"products":[{"product_id":"victron-smartsolar-mppt-150-100-tr-ve-can-scc115110411","title":"Victron SmartSolar MPPT 150\/100-TR VE.Can [SCC115110411]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 150\/100-TR VE.Can\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks.\u003cbr\u003e\u003cbr\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.\u003cbr\u003e\u003cbr\u003eThe charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControl Your Charger Remotely\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDaisy Chain Additional Units\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply \"daisy-chained\" to each other with a single RJ45 cable between the individual units.\u003cbr\u003e\u003cbr\u003eWhen connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRemote Monitoring and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSolar Control Display\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single-unit monitoring or for streetlight control. The remote on\/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display\/control provides live data, setup, and management, straight from the face of the device.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/90062QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/90062OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/90062BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440380473479,"sku":"MXG-90062","price":542.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/90062XL.jpg?v=1775873738"},{"product_id":"victron-lynx-smart-bms-500-battery-mgmt-system-f-lithium-smart-batteries-lyn034160200","title":"Victron Lynx Smart BMS 500 Battery MGMT System f\/Lithium Smart Batteries [LYN034160200]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 500 Battery MGMT System for Lithium Smart Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature-rich and complete option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch\u003c\/li\u003e\n\u003cli\u003eBattery monitor, indicating the state of charge percentage and more data.\u003c\/li\u003e\n\u003cli\u003ePre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use with our VictronConnect App, for setup and monitoring.\u003c\/li\u003e\n\u003cli\u003eLocal and remote monitoring using a Victron GX device, for example, the Cerbo GX.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Lynx Smart BMS is part of the modular Lynx distribution system.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/90143QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/90143BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440381423751,"sku":"MXG-90143","price":997.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/90143XL.jpg?v=1775873746"},{"product_id":"victron-smartsolar-mppt-solar-charge-controller-250v-100am-ve-can-port-ul-approved-scc125110412","title":"Victron SmartSolar MPPT VE CAN 250V-100A w\/VE.CAN Port [SCC125110412]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT VE CAN 250V-100A with VE.CAN Port\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks?\u003cbr\u003e\u003cbr\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger connect to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.\u003cbr\u003e\u003cbr\u003eThe charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControl Your Charger Remotely\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe MPPT VE.Can SmartSolar charger be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDaisy Chain Additional Units\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe VE.Can SmartSolar charger isequipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply \"daisy-chained\" to each other with a single RJ45 cable between the individual units.\u003cbr\u003e\u003cbr\u003eWhen connected to each other, all individual VE.Can SmartSolar chargers, synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRemote Monitoring and Control\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSolar Control Display\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single-unit monitoring or for streetlight control. The remote on\/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display\/control provides live data, set-up, and management, straight from the face of the device.  \u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/91819QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440397348999,"sku":"MXG-91819","price":643.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/91819XL.jpg?v=1775874256"},{"product_id":"victron-bmv-710h-smart-high-voltage-battery-monitor-60-385vdc-bam030710100","title":"Victron BMV-710H Smart High Voltage Battery Monitor (60-385VDC) [BAM030710100]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBMV-710H Smart High Voltage Battery Monitor (60-385VDC)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe BMV-710H Smart has Bluetooth built-in and can connect wirelessly to your phone (or tablet) via the VictronConnect App to conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.\u003c\/p\u003e\u003cp\u003eThis battery monitor can calculate the state of charge of a battery and keep track of the ampere hours consumed from the battery by integrating the current flowing in or out of the battery.\u003c\/p\u003e\u003cp\u003eThe monitor comes with a round head unit, a square bezel overlay, a screw ring for mounting, a 10m UTP RJ12 cable, a fused power supply cable, and a 500 A\/50 mV shunt. Because of the high voltage application, the shunt is housed in a special enclosure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery ‘fuel gauge’, time-to-go indicator, and much more \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe remaining battery capacity depends on the ampere-hours consumed, discharge current, and temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.\u003c\/p\u003e\u003cp\u003eNext to the basic display options, such as voltage, current, and ampere-hours consumed, the BMV-700 series also displays the state of charge, time to go, and power consumption in Watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Smart\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, Macbooks and other devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to Install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10m) and battery cable with fuse (2m); No other components are needed.\u003c\/p\u003e\u003cp\u003eAlso included are a separate front bezel for a square or round display appearance and a securing ring for the rear mounting and screws for the front mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to Program (with your smartphone!)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings.\u003c\/p\u003e\u003cp\u003eAlternatively, choose the fast and easy solution: Download the smartphone app (Bluetooth Smart Dongle needed)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery voltage, current, power, ampere-hours consumed, and state of charge\u003c\/li\u003e\n\u003cli\u003eRemaining time at the current rate of discharge\u003c\/li\u003e\n\u003cli\u003eProgrammable visual and audible alarm\u003c\/li\u003e\n\u003cli\u003eProgrammable relay, to turn off non critical loads or run a generator when needed\u003c\/li\u003e\n\u003cli\u003e500 Amp quick connect shunt and connection kit\u003c\/li\u003e\n\u003cli\u003eShunt selection capability up to 10,000 amps\u003c\/li\u003e\n\u003cli\u003eVE.Direct communication port\u003c\/li\u003e\n\u003cli\u003eStores a wide range of historical events, which can be used to evaluate usage patterns and battery health\u003c\/li\u003e\n\u003cli\u003eWide input voltage range: 6.5 – 95V\u003c\/li\u003e\n\u003cli\u003eHigh current measurement resolution: 10 mA (0.01A)\u003c\/li\u003e\n\u003cli\u003eLow current consumption: 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBMV-710H Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupply Voltage Range: 60 – 385 VDC\u003c\/li\u003e\n\u003cli\u003eCurrent Draw, Back Light Off: \u0026lt; 4mA\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range, Auxiliary Battery:  n. a.\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Ah): 1 - 9999 Ah\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -40 +50°C (-40 - 120°F)\u003c\/li\u003e\n\u003cli\u003eMeasures Voltage of Second Battery, or Temperature, or Midpoint: No\u003c\/li\u003e\n\u003cli\u003eTemperature Measurement Range: n. a.\u003c\/li\u003e\n\u003cli\u003eVE.Direct Communication Port: Yes\u003c\/li\u003e\n\u003cli\u003eRelay: 60V \/ 1A normally open (function can be inverted)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eResolution \u0026amp; Accuracy (with a 500 A shunt):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent: ± 0.01A\u003c\/li\u003e\n\u003cli\u003eVoltage: ± 0.01V\u003c\/li\u003e\n\u003cli\u003eAmp Hours: ± 0.1 Ah\u003c\/li\u003e\n\u003cli\u003eState of Charge: (0 – 100%) ± 0.1%\u003c\/li\u003e\n\u003cli\u003eTime to Go: ± 1 min\u003c\/li\u003e\n\u003cli\u003eTemperature: n. a.\u003c\/li\u003e\n\u003cli\u003eAccuracy of Current Measurement: ± 0.4%\u003c\/li\u003e\n\u003cli\u003eAccuracy of Voltage Measurement: ± 0.3%\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstallations \u0026amp; Dimensions: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation: Flush mount\u003c\/li\u003e\n\u003cli\u003eFront: 63mm diameter\u003c\/li\u003e\n\u003cli\u003eFront Bezel: 69 x 69 mm (2.7 x 2.7 inch)\u003c\/li\u003e\n\u003cli\u003eShunt Connection Bolts: M10 (0.3937 inch)\u003c\/li\u003e\n\u003cli\u003eBody Diameter and Depth: 52 mm (2.0 inch) and 31 mm (1.2 inch)\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP55 (not intended for outdoor use)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eEmission \/ Immunity: EN 55014-1 \/ EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive: ECE R10-4 \/ EN 50498\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAccessories:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShunt (included): 500A \/ 50mV\u003c\/li\u003e\n\u003cli\u003eCables (included): 10 meter 6 core UTP with RJ12 connectors, and cable with 1Amp slow blow fuse for ‘+’ connection\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Optional (ASS000100000)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/99783QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/99783BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MRljOaTdc3s\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440759632007,"sku":"MXG-99783","price":530.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/99783XL.jpg?v=1775879698"},{"product_id":"victron-lynx-smart-bms-1000-battery-management-system-f-lithium-smart-batteries-lyn034170210","title":"Victron Lynx Smart BMS 1000 Battery Management System f\/Lithium Smart Batteries [LYN034170210]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 1000 Battery Management System for Lithium Smart Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Smart BMS is a dedicated Battery Management System (BMS) for the Victron Lithium Battery Smart batteries. These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities. They can be connected in series, parallel, and series\/parallel so that a battery bank can be built for system voltages of 12V, 24 V, or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V and up to 102 kWh in a 24 V1) and 48 V1) system.\u003c\/p\u003e\u003cp\u003eOut of the various available BMSes, the Lynx Smart BMS is the most feature-rich and complete option and integrates seamlessly into the Lynx Distributor system. This model is a 1000 A (M10) version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 1000 A Contactor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe contactor acts as a secondary safety system to protect the battery in case the primary controls (ATC, ATD, and\/or DVCC) fail to disable loads and\/or chargers when required and is also suitable as a remote controllable main system switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-charge Circuit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn addition to the contactor, a built-in pre-charge circuit prevents high inrush currents when connecting a capacitive load such as a MultiPlus\/Quattro or other inverter, eliminating the need for external pre-charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMonitoring and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMonitor and control the BMS via Bluetooth using the VictronConnect App or a GX device such as a Cerbo GX and the VRM Portal. A built-in battery monitor that operates similarly as the other Victron Energy battery monitors, provides data such as state of charge, voltage, current, historical data, status info, and more in real-time and with instant readout even without the need to connect to the BMS, allowing diagnostic at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDVCC closed Loop Control as Well as ATC\/ATD Contacts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatible Victron inverters\/chargers and solar chargers are automatically controlled via a connected GX device and DVCC. The ATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed. Alternator ATC contact of the alternator opens first and then with a delay of 2 seconds the contactor. These 2 seconds ensure that the alternator is switched off before the battery is disconnected from the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe advantage of the onboard auxiliary power supply (1.1 A @ system voltage) is to provide power to specific loads (i.e. a GX device) after the BMS has shut down the loads in the event of a low cell voltage event. If no charge voltage is detected within 5 minutes, the BMS, including the AUX connection switches off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed a marine MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead out the fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx Distributors and their fuses via VictronConnect or a GX device 1) To reduce the required balancing time, we recommend using as many different batteries in series as possible for the application. 24 V systems are best built using 24 V batteries, and a 48 V system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis System Contains the Following Components:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLynx Distributor with 2 fused paralleled lithium-ion smart batteries.\u003c\/li\u003e\n\u003cli\u003eLynx Smart BMS with BMS, contactor, and battery monitor\u003c\/li\u003e\n\u003cli\u003eA second Lynx distributor provides fused connections for inverter\/charger(s), loads and chargers (additional modules can be added if more connections are needed)\u003c\/li\u003e\n\u003cli\u003eA Cerbo GX (or other GX device) to read out the Lynx Smart BMS and Lynx Distributor data.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC\u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC\u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48 V\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No\u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 1000 A continuous\u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 1200 A for 5 minutes \u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages\u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V)\u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eApproximately 4.2 W (350 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems, 20 Ω and above for 24 V and 48 V systems\u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by a resettable fuse\u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by a resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 17 Nm)\u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45\u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals\u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected in one system Lynx Distributor fuse monitoring (up to 4 modules) RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS\u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (h x w x d): 230 x 180 x 100 mm\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 2.7 kg\u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper\u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (h x w): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003eHumidity Max.: 95 % (non-condensing)\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018\u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012\u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/101855QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/101855OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440815435911,"sku":"MXG-101855","price":1178.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/101855XL.jpg?v=1775881412"},{"product_id":"newmar-np-12-nav-pac-12v-np-12","title":"Newmar NP-12 Nav-Pac - 12V [NP-12]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNP-12 Nav-Pac - 12V\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents voltage “drop-out” during engine start and\/or other high intermittent loads such as Thrusters\u003c\/li\u003e\n\u003cli\u003eAbsorbs line “spikes”\u003c\/li\u003e\n\u003cli\u003eFilters out electrical interference\u003c\/li\u003e\n\u003cli\u003eProvides supplemental voltage and battery backup for up to 15 min.\u003c\/li\u003e\n\u003cli\u003eOptional remote panel (773-5037-0)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOutput: 12 Volt @ 20 amps max.\u003c\/li\u003e\n\u003cli\u003eBattery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air.\u003c\/li\u003e\n\u003cli\u003eNoise Filtering: Audio through 200 MHZ\u003c\/li\u003e\n\u003cli\u003eVoltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds)\u003c\/li\u003e\n\u003cli\u003eBack-Up Power: 8A for 15 minutes, 12A for 8 minutes, 18A for 2 minutes, and 20A for 1 minutes\u003c\/li\u003e\n\u003cli\u003eSize: 5.25 x 6.2 x 7.4 inches (13.3 X 15.7 X 18.8 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.9 lbs. (2.7 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":44440824021127,"sku":"MXG-102315","price":698.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/102315XL.jpg?v=1775881646"},{"product_id":"newmar-np-24-nav-pac-24v-np-24","title":"Newmar NP-24 Nav-Pac - 24V [NP-24]","description":"\u003ch2\u003eNewmar NP-24 Nav-Pac - 24V [NP-24]\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNP-24 Nav-Pac - 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarine communication and navigation electronics such as programmable data transceivers, GPS, and other microprocessor-controlled devices require clean and steady DC input power. Their sensitive circuitry is highly vulnerable to voltage drops from engine starts, noise and line spikes from alternators and motors, and noise from various other electronic devices. NAV-PAC prevents these conditions from affecting electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents voltage “drop-out” during engine start and\/or other high intermittent loads such as Thrusters\u003c\/li\u003e\n\u003cli\u003eAbsorbs line “spikes”\u003c\/li\u003e\n\u003cli\u003eFilters out electrical interference\u003c\/li\u003e\n\u003cli\u003eProvides supplemental voltage and battery backup for up to 15 min.\u003c\/li\u003e\n\u003cli\u003eOptional remote panel (773-5037-0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput: 24 Volt @ 15 amps max.\u003c\/li\u003e\n\u003cli\u003eBattery: Sealed Rechargeable 5.0 Amp-Hour, 5-7 years of typical life, can be replaced. A low-voltage disconnect circuit protects the battery from total discharge. Certified by DOT and IATA for shipment by air.\u003c\/li\u003e\n\u003cli\u003eNoise Filtering: Audio through 200 MHZ\u003c\/li\u003e\n\u003cli\u003eVoltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps Max (8 x 20 microseconds)\u003c\/li\u003e\n\u003cli\u003eBack-Up Power: 8A for 15 minutes, 12A for 8 minutes, and 18A for 2 minutes\u003c\/li\u003e\n\u003cli\u003eSize: 6.0 x 6.75 x 7.5 inches (13.3 X 17.14 X 19 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 8 lbs. (3.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":44440824053895,"sku":"MXG-102316","price":754.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/102316XL.jpg?v=1775881646"},{"product_id":"victron-lynx-smart-bms-500-ng-m10-lyn034160310","title":"Victron Lynx Smart BMS 500 NG (M10) [LYN034160310]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 500 NG (M10)\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Lynx Smart BMS NG is a dedicated Battery Management System (BMS) designed specifically for the Victron Lithium NG batteries. These batteries utilize Lithium Iron Phosphate (LiFePO4) technology and are available in 12.8 V, 25.6 V, and 51.2 V variants with various capacities. They can be configured in series, parallel, and series\/parallel arrangements, allowing for the creation of battery banks with system voltages of 12V, 24V, or 48V. The maximum number of batteries in a single system is 50, enabling a maximum energy storage of 192kWh in a 12V system and up to 384kWh in a 24V and 48V system. For comprehensive details about these batteries, visit the Victron Lithium NG battery product page. \u003c\/p\u003e\u003cp\u003eOut of the various BMSes available* for the Lithium NG batteries, the Lynx Smart BMS NG is the most feature-rich and complete option and integrates seamlessly with other M10 products in the Lynx Distributor system. It is available in 500 A (M10) and 1000 A (M10) versions\u003csup\u003e1\u003c\/sup\u003e).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 500 A or 1000 A Contactor \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 500 A (M10) and 1000 A (M10) versions\u003c\/li\u003e\n\u003cli\u003eActs as a secondary safety system to protect the battery in case primary controls (ATC, ATD, and\/or DVCC) fail\u003c\/li\u003e\n\u003cli\u003eSuitable as a remote controllable main system switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-Charge Circuit \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents high inrush currents when connecting capacitive loads like inverters\u003c\/li\u003e\n\u003cli\u003eEliminates the need for external pre-charging devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMonitoring \u0026amp; Control \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portal\u003c\/li\u003e\n\u003cli\u003eReadout of cell voltages and temperatures also on GX devices and the VRM portal\u003c\/li\u003e\n\u003cli\u003eBuilt-in battery monitor provides data such as state of charge, voltage, current, historical data, status info, and more in real-time\u003c\/li\u003e\n\u003cli\u003eDiagnostic at a Glance with Instant Readout\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDVCC Closed Loop Control as well as ATC\/ATD Contacts \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible Victron inverter\/chargers, the Orion XS 12\/12-50A DC-DC battery charger, and solar charge controllers are automatically controlled via a connected GX device and DVCC.\u003c\/li\u003e\n\u003cli\u003eATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCan be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable)\u003c\/li\u003e\n\u003cli\u003eFeatures Alternator ATC mode for safe alternator disconnection before battery disconnects\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOnboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic shutdown of BMS and AUX connection if no charge voltage is detected within 5 minutes after a low voltage event\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy connection and communication with GX devices via VE.Can using a standard RJ45 network cable\u003c\/li\u003e\n\u003cli\u003eIntegration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices\u003c\/li\u003e\n\u003cli\u003eReceive alarms in case of blown fuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csup\u003e1\u003c\/sup\u003e) Up to 5 BMS-es can be paralleled. This requires a firmware update, expected in Q3 2024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC \u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC \u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48V \u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 500 A continuous \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 600 A for 5 minutes \u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages \u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V) \u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays \u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems 20 Ω and above for 24 V and 48 V systems \u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum Current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 33 Nm) – can be combined with all M10 Lynx products \u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45 \u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals \u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 50 batteries can be connected in one system \u003c\/li\u003e\n\u003cli\u003eLynx Distributor Fuse Monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS \u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (H x W x D): 190 x 180 x 80 mm \u003c\/li\u003e\n\u003cli\u003eUnit Weight: 1.9 kg \u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper \u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (H x W): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % (non-condensing) \u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018 \u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012 \u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/103439QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/103439OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440854331527,"sku":"MXG-103439","price":884.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/103439XL.jpg?v=1775882587"},{"product_id":"victron-lynx-smart-bms-1000-ng-m10-mgmt-system-lyn034170310","title":"Victron Lynx Smart BMS 1000 NG (M10) MGMT System [LYN034170310]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 1000 NG (M10) MGMT System\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Lynx Smart BMS NG is a dedicated Battery Management System (BMS) designed specifically for the Victron Lithium NG batteries. These batteries utilize Lithium Iron Phosphate (LiFePO4) technology and are available in 12.8 V, 25.6 V, and 51.2 V variants with various capacities. They can be configured in series, parallel, and series\/parallel arrangements, allowing for the creation of battery banks with system voltages of 12V, 24V, or 48V. The maximum number of batteries in a single system is 50, enabling a maximum energy storage of 192kWh in a 12V system and up to 384kWh in a 24V and 48V system. For comprehensive details about these batteries, visit the Victron Lithium NG battery product page. \u003c\/p\u003e\u003cp\u003eOut of the various BMSes available* for the Lithium NG batteries, the Lynx Smart BMS NG is the most feature-rich and complete option and integrates seamlessly with other M10 products in the Lynx Distributor system. It is available in 500 A (M10) and 1000 A (M10) versions\u003csup\u003e1\u003c\/sup\u003e).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 500 A or 1000 A Contactor \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLynx Smart BMS NG 500A A Lynx Smart BMS NG 1000A \u003c\/li\u003e\n\u003cli\u003eAvailable in 500 A (M10) and 1000 A (M10) versions\u003c\/li\u003e\n\u003cli\u003eActs as a secondary safety system to protect the battery in case primary controls (ATC, ATD, and\/or DVCC) fail\u003c\/li\u003e\n\u003cli\u003eSuitable as a remote controllable main system switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-charge Circuit \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents high inrush currents when connecting capacitive loads like inverters\u003c\/li\u003e\n\u003cli\u003eEliminates the need for external pre-charging devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMonitoring \u0026amp; Control \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portal\u003c\/li\u003e\n\u003cli\u003eReadout of cell voltages and temperatures also on GX devices and the VRM portal\u003c\/li\u003e\n\u003cli\u003eBuilt-in battery monitor provides data such as state of charge, voltage, current, historical data, status info, and more in real-time\u003c\/li\u003e\n\u003cli\u003eDiagnostic at a glance with Instant Readout\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDVCC Closed Loop Control as well as ATC\/ATD Contacts \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible Victron inverter\/chargers, the Orion XS 12\/12-50A DC-DC battery charger, and solar charge controllers are automatically controlled via a connected GX device and DVCC.\u003c\/li\u003e\n\u003cli\u003eATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCan be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable)\u003c\/li\u003e\n\u003cli\u003eFeatures Alternator ATC mode for safe alternator disconnection before battery disconnects\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOnboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic shutdown of BMS and AUX connection if no charge voltage is detected within 5 minutes after a low voltage event\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy connection and communication with GX devices via VE.Can using a standard RJ45 network cable\u003c\/li\u003e\n\u003cli\u003eIntegration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices\u003c\/li\u003e\n\u003cli\u003eReceive alarms in case of blown fuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csup\u003e1\u003c\/sup\u003e) Up to 5 BMS-es can be paralleled. This requires a firmware update, expected in Q3 2024.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC \u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC \u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48 V \u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 1000 A continuous \u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 1200 A for 5 minutes\u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages \u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V) \u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approximately 4.2 W (350 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems 20 Ω and above for 24 V and 48 V systems \u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by resettable fuse \u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum Current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 33 Nm) – can be combined with all M10 Lynx products \u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45 \u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals \u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 50 batteries can be connected in one system \u003c\/li\u003e\n\u003cli\u003eLynx Distributor Fuse Monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS \u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (H x W x D): 230 x 180 x 100 mm\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 2.7 kg \u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper \u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (H x W): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C \u003c\/li\u003e\n\u003cli\u003eHumidity: Max. 95 % (non-condensing) \u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018 \u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012 \u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/103440QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/103440OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440854364295,"sku":"MXG-103440","price":1178.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/103440XL.jpg?v=1775882587"},{"product_id":"victron-smartsolar-mppt-150-100-mc4-ve-can-scc115110511","title":"Victron SmartSolar MPPT 150\/100-MC4 VE-Can [SCC115110511]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 150\/100-MC4 VE-Can\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks.\u003c\/p\u003e\u003cp\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eModels: 12\/24\/36\/48 Volt\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eUltra-fast Maximum Power Point Tracking (MPPT)\u003c\/li\u003e\n\u003cli\u003eAdvanced Maximum Power Point Detection in case of partial shading conditions \u003c\/li\u003e\n\u003cli\u003eOutstanding conversion efficiency\u003c\/li\u003e\n\u003cli\u003eFlexible charge algorithm\u003c\/li\u003e\n\u003cli\u003eExtensive electronic protection \u003c\/li\u003e\n\u003cli\u003eBluetooth Smart built-in \u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor and optional external battery voltage and temperature sensing via\u003c\/li\u003e\n\u003cli\u003eBluetooth\u003c\/li\u003e\n\u003cli\u003eFully discharged battery recovery function \u003c\/li\u003e\n\u003cli\u003eVE.Can: the multiple controller solution\u003c\/li\u003e\n\u003cli\u003eVE.Direct or VE.Can\u003c\/li\u003e\n\u003cli\u003eRemote on-off\u003c\/li\u003e\n\u003cli\u003eProgrammable relay\u003c\/li\u003e\n\u003cli\u003eOptional: SmartSolar pluggable LCD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/104846QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/104846BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44440899944583,"sku":"MXG-104846","price":553.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/104846XL.jpg?v=1775883870"},{"product_id":"victron-smartsolar-mppt-450-100-mc4-ve-can-ve-direct-450-100-scc145110510","title":"Victron SmartSolar MPPT 450\/100-MC4 VE.Can VE.Direct 450\/100 [SCC145110510]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 450\/100-MC4 VE.Can VE.Direct 450\/100\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid-connected battery systems.\u003c\/p\u003e\u003cp\u003eIn a 5.76kW and 11.52kW model, features include a wide 65-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, a display screen, fully programmable battery charging parameters, and active cooling. The new metal case design and fully covered electrical connections improve safety and modernize the presentation in line with the latest suite of Victron products.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eMPPT: Ultra Fast Maximum Power Point Tracking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartSolar RS solar charge controller connects to a PV array of between 65 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eSetup \u0026amp; monitor with VictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect app. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eDaisy Chain Additional Units\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS \u0026amp; VE.Can MPPT units. The additional units are simply “daisy chained” to each other with an RJ45 cable.When connected to each other, all individual charge controllers, will synchronise their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eRemote Monitoring and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eSmartSolar Display\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eI\/O Connections\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/107910OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/107910BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44441013354631,"sku":"MXG-107910","price":1218.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/107910XL.jpg?v=1775886270"},{"product_id":"victron-lynx-smart-bms-500-m10-battery-management-system-lyn034160210","title":"Victron Lynx Smart BMS 500 M10 Battery Management System [LYN034160210]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 500 M10 Battery Management System\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature-rich and complete option. It is available in two versions: 500A and 1000A (both with M10 busbar connections).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.\u003c\/li\u003e\n\u003cli\u003eBattery monitor, indicating state of charge percentage and more data.\u003c\/li\u003e\n\u003cli\u003ePre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use with our VictronConnect app, for setup and monitoring, including Instant Readout - key data of the BMS at a glance.\u003c\/li\u003e\n\u003cli\u003eLocal and remote monitoring using a Victron GX device, for example, the Cerbo GX or Ekrano GX.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Lynx Smart BMS is part of the modular Lynx Distribution system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVictronConnect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/108014QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/108014OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/108014BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44441019121799,"sku":"MXG-108014","price":884.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/108014XL.jpg?v=1775886434"},{"product_id":"victron-smartsolar-mppt-250-70-tr-ve-can-scc125070421","title":"Victron SmartSolar MPPT 250\/70-TR VE.Can [SCC125070421]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT 250\/70-TR VE.Can\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SmartSolar MPPT is packed with advanced technology to get the most out of your solar panels whilst protecting your batteries. It operates at 98% efficiency with natural cooling and is engineered to withstand the toughest conditions.\u003c\/p\u003e\u003cp\u003eThe lightning-fast maximum power point tracking converts all available sunlight into useful energy. Its charge algorithms enhance power output and extend battery life by intelligently managing charging cycles. Built-in SafetyShield+ features such as over-temperature, short-circuit, and reverse polarity protection safeguard your batteries from potential issues.\u003c\/p\u003e\u003cp\u003eSimply put: the SmartSolar MPPT is the smartest solar charge controller under the sun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLightning-fast maximum power point tracking\u003c\/li\u003e\n\u003cli\u003eRemote Management optional\u003c\/li\u003e\n\u003cli\u003eIntelligent charge algorithm\u003c\/li\u003e\n\u003cli\u003eVictronConnect App\u003c\/li\u003e\n\u003cli\u003eWireless charging synchronisation\u003c\/li\u003e\n\u003cli\u003eSafetyShield+\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharger Input - Voltage: 250V\u003c\/li\u003e\n\u003cli\u003eCharger Output - Amps: 70A\u003c\/li\u003e\n\u003cli\u003eCharger Output Voltage: 12V, 24V 36V, 48V\u003c\/li\u003e\n\u003cli\u003eCharging Banks: 1\u003c\/li\u003e\n\u003cli\u003eContinuous Amperage: 35A\/MC 4 conn\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 6\"H x 10\"W x 11\"L WT: 8.3 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 8719076051213\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/111881QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/111881OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/111881BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44441182503047,"sku":"MXG-111881","price":536.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/111881XL.jpg?v=1775890115"},{"product_id":"bep-remote-battery-management-cluster-f-single-engine-80-716-0014-00","title":"BEP Remote Battery Management Cluster f\/Single Engine [80-716-0014-00]","description":"\u003ch2\u003e\u003cb\u003eBEP Remote Battery Management Cluster f\/Single Engine [80-716-0014-00]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRemote Battery Management Cluster f\/Single Engine\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOffers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy! Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard configurations and can be combined with other battery distribution products. Available in single, dual and triple engine configurations\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/58665OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":44478831034503,"sku":"MXG-58665","price":505.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/58665XL.jpg?v=1776294294"},{"product_id":"bep-remote-battery-management-cluster-f-twin-engine-80-716-0015-00","title":"BEP Remote Battery Management Cluster f\/Twin Engine [80-716-0015-00]","description":"\u003ch2\u003e\u003cb\u003eBEP Remote Battery Management Cluster f\/Twin Engine [80-716-0015-00]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRemote Battery Management Cluster f\/Twin Engine\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOffers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy! Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard configurations and can be combined with other battery distribution products. Available in single, dual and triple engine configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/58666OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":44478831067271,"sku":"MXG-58666","price":845.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/58666XL.jpg?v=1776294294"},{"product_id":"bep-remote-battery-management-cluster-f-triple-engine-80-716-0016-00","title":"BEP Remote Battery Management Cluster f\/Triple Engine [80-716-0016-00]","description":"\u003ch2\u003e\u003cb\u003eBEP Remote Battery Management Cluster f\/Triple Engine [80-716-0016-00]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003eShips Direct From Manufacturer\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRemote Battery Management Cluster f\/Triple Engine\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOffers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy! Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard configurations and can be combined with other battery distribution products. Available in single, dual and triple engine configurations\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/58667OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":44478831689863,"sku":"MXG-58667","price":1179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/58667XL.jpg?v=1776294294"},{"product_id":"bep-panel-mounted-dc-systems-monitor-80-600-0027-00","title":"BEP Panel Mounted DC Systems Monitor [80-600-0027-00]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBEP Panel Mounted DC Systems Monitor [80-600-0027-00]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePanel Mounted DC Systems Monitor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Contour Digital Monitor offers a comprehensive range of functions to allow full monitoring of your batteries and charging systems. Monitors voltage on up to 3 battery banks, Amps for charge and discharge and capacity remaining in amp hours \/percentage utilising peukerts exponent (house bank only) with the added function of a bilge monitor allowing 24 hour monitoring of your bilge pump. This meter is an important addition to modern battery management systems. Selectable legends allow full information to be shown on the screen to avoid confusion, unlike other digital meters available, which only show confusing digits. LCD screen draws 70 percent less than equivalent LED screens. Comes supplied with shunt, part No. LB-450-50. Installation kits are available in 5m and 10m lengths.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/86165OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":44479656132743,"sku":"MXG-86165","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/86165XL.jpg?v=1776305895"},{"product_id":"victron-smartsolar-mppt-solar-charge-controller-250v-70amp-ul-approved-scc125070221","title":"Victron SmartSolar MPPT Solar Charge Controller - 250V - 70AMP - UL Approved [SCC125070221]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmartSolar MPPT Solar Charge Controller - 250V - 70AMP - UL Approved\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA solar charger gathers energy from the solar panels and stores it in the batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.\u003c\/p\u003e\u003cp\u003eThe SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeature Highlights Common to All Models:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast Maximum Power Point Tracking (MPPT).\u003c\/li\u003e\n\u003cli\u003eAdvanced Maximum Power Point Detection in case of partial shading conditions.\u003c\/li\u003e\n\u003cli\u003eOutstanding conversion efficiency.\u003c\/li\u003e\n\u003cli\u003eNatural convection cooling. \u003c\/li\u003e\n\u003cli\u003eAutomatic battery voltage recognition.\u003c\/li\u003e\n\u003cli\u003eFlexible charge algorithm.\u003c\/li\u003e\n\u003cli\u003eOver temperature protection and power derating when the temperature is high.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSizing Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuitable for a variety of battery voltages. Most models connect to 12, 24, and 48V batteries, some only connect to 12 and 24V batteries, or only to 48V batteries.\u003c\/li\u003e\n\u003cli\u003eCharge currents rating from 10A up to 100A.\u003c\/li\u003e\n\u003cli\u003eMaximum PV array Voc voltages ranging from 75V up to 250V.\u003c\/li\u003e\n\u003cli\u003eMultiple chargers can be used in parallel, for large systems we recommend using the models with a VE.Can communication port.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePV Terminal Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTR - one positive and one negative screw terminal.\u003c\/li\u003e\n\u003cli\u003eMC4 - 3 pairs of paralleled MC4 connectors.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBluetooth Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmartSolar models have Bluetooth.\u003c\/li\u003e\n\u003cli\u003eBlueSolar models do not have Bluetooth. They can be retrofitted to have Bluetooth by connecting the VE.Direct Bluetooth Smart dongle. Advantage: the product is not Bluetooth accessible when the dongle is not connected. Note that on the SmartSolar models, Bluetooth can be disabled.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDisplay Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVictronConnect Application. Connects via Bluetooth or via the VE.Direct - USB interface\u003c\/li\u003e\n\u003cli\u003eMPPT Control. Connects to all models via a VE.Direct cable\u003c\/li\u003e\n\u003cli\u003eSmartSolar Control Display. Plugs directly into the housing of the larger models\u003c\/li\u003e\n\u003cli\u003eGX device\u003c\/li\u003e\n\u003cli\u003eVRM website (GX monitoring device needed)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommunication Ports:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVE.Direct - all models\u003c\/li\u003e\n\u003cli\u003eVE.Direct and VE.Can - limited models. VE.Can is especially suitable for systems with multiple solar chargers. All units are simply “daisy chained” to each other with a single RJ45 cable between each unit and also between the last unit in the chain and the GX monitoring device.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTemperature Sensor Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternally (all models).\u003c\/li\u003e\n\u003cli\u003eExternally via the Smart Battery Sense (only SmartSolar models).  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eLoad Output Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePhysical output - On the 10, 15 and 20A models.\u003c\/li\u003e\n\u003cli\u003eVirtual output - via VE.Direct TX digital output cable and the BatteryProtect or a solid-state relay.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRemotely Enabling and Disabling the Charger:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAll larger units feature the Victron standard remote on\/off terminals. All models that don’t feature an onboard Remote on\/off terminal can be remotely controlled by using the VE.Direct non-inverting remote on\/off cable – ASS030550310. Note that this prohibits using the VE.Direct port for anything else.  \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFirmware Update Options:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLocal updates via the VictronConnect Application (via Bluetooth or USB-VE.Direct interface)\u003c\/li\u003e\n\u003cli\u003eRemote updates via the VRM website and a GX device  \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVictronConnect Application (free download)\u003c\/li\u003e\n\u003cli\u003eWire boxes, to cover and protect the terminals. See table on page 2 for wire box types\u003c\/li\u003e\n\u003cli\u003eControl and display panels: MPPT control or SmartSolar control)\u003c\/li\u003e\n\u003cli\u003eGX monitoring device (CCGX, Venus GX, Octo GX, or Cerbo GX)\u003c\/li\u003e\n\u003cli\u003eData cables: VE.Direct cable, RJ45 Cable (VE.Can models only), USB-VE.Direct interface\u003c\/li\u003e\n\u003cli\u003eExternal control cables: TX cable, non-inverting cable\u003c\/li\u003e\n\u003cli\u003eBluetooth dongle (for non-smart models)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoad Output: No\u003c\/li\u003e\n\u003cli\u003eBattery Voltage: 12\/24\/36\/48V\u003c\/li\u003e\n\u003cli\u003eOptional Display: MPPT ctrl \u0026amp; SmartSolar ctrl \u003c\/li\u003e\n\u003cli\u003eBluetooth: Built-in\u003c\/li\u003e\n\u003cli\u003eCom. Port: VE.Direct\u003c\/li\u003e\n\u003cli\u003eRemote On-Off: Yes\u003c\/li\u003e\n\u003cli\u003eProgramable Relay: Yes\u003c\/li\u003e\n\u003cli\u003eWire Box: L\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/89612QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/89612BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ADB1xlGs6xQ?si=z1TfgHUMmCNP5Oc5\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44480177471623,"sku":"MXG-89612","price":502.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/89612XL.jpg?v=1776307263"},{"product_id":"victron-bmv-700h-high-voltage-battery-monitor-60-385vdc-bam010700100","title":"Victron BMV-700H High Voltage Battery Monitor (60-385VDC) [BAM010700100]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBMV-700H High Voltage Battery Monitor (60-385VDC)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe BMV-700H is a high-precision battery monitor that has been specially designed for systems with a high battery voltage ranging from 60 to 385 volts.\u003c\/p\u003e\u003cp\u003eThese battery monitors calculate the state of charge of a battery and keep track of the ampere-hours consumed from the battery by integrating the current flowing in or out of the battery.\u003c\/p\u003e\u003cp\u003eThey both come with a round head unit, a square bezel overlay, a screw ring for mounting, a 10m UTP RJ12 cable, a fused power supply cable, and a 500 A\/50 mV shunt. Because of the high voltage application, the shunt is housed in a special enclosure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery ‘fuel gauge’, time-to-go indicator, and much more \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature, and the age of the battery. Complex software algorithms are needed to take all these variables into account.\u003c\/p\u003e\u003cp\u003eNext to the basic display options, such as voltage, current, and ampere-hours consumed, the BMV-700 series also displays the state of charge, time to go, and power consumption in Watts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to Install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll electrical connections are to the quick-connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10m) and battery cable with fuse (2m); No other components are needed.\u003c\/p\u003e\u003cp\u003eAlso included is a separate front bezel for a square or round display appearance and a securing ring for the rear mounting and screws for the front mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBMV-700H: 60 to 385 VDC Voltage Range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo additional parts are needed. Note: This is suitable for systems with grounded negative only (the battery monitor is not isolated from the shunt).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery voltage, current, power, ampere-hours consumed, and state of charge\u003c\/li\u003e\n\u003cli\u003eRemaining time at the current rate of discharge\u003c\/li\u003e\n\u003cli\u003eProgrammable visual and audible alarm\u003c\/li\u003e\n\u003cli\u003eProgrammable relay, to turn off noncritical loads or run a generator when needed\u003c\/li\u003e\n\u003cli\u003e500 Amp quick connect shunt and connection kit\u003c\/li\u003e\n\u003cli\u003eShunt selection capability up to 10,000 amps\u003c\/li\u003e\n\u003cli\u003eVE.Direct communication port\u003c\/li\u003e\n\u003cli\u003eStores a wide range of historical events, which can be used to evaluate usage patterns and battery health\u003c\/li\u003e\n\u003cli\u003eWide input voltage range: 6.5 – 95V\u003c\/li\u003e\n\u003cli\u003eHigh current measurement resolution: 10 mA (0.01A)\u003c\/li\u003e\n\u003cli\u003eLow current consumption: 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBMV-700H Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupply Voltage Range: 60 – 385 VDC\u003c\/li\u003e\n\u003cli\u003eCurrent Draw, Back Light Off: \u0026lt; 4mA\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range, Auxiliary Battery:  n. a.\u003c\/li\u003e\n\u003cli\u003eBattery Capacity (Ah): 1 - 9999 Ah\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -40 +50°C (-40 - 120°F)\u003c\/li\u003e\n\u003cli\u003eMeasures Voltage of Second Battery, or Temperature, or Midpoint: No\u003c\/li\u003e\n\u003cli\u003eTemperature Measurement Range: n. a.\u003c\/li\u003e\n\u003cli\u003eVE.Direct Communication Port: Yes\u003c\/li\u003e\n\u003cli\u003eRelay: 60V \/ 1A normally open (function can be inverted)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eResolution \u0026amp; Accuracy (with a 500 A shunt):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent: ± 0.01A\u003c\/li\u003e\n\u003cli\u003eVoltage: ± 0.01V\u003c\/li\u003e\n\u003cli\u003eAmp Hours: ± 0.1 Ah\u003c\/li\u003e\n\u003cli\u003eState of Charge: (0 – 100%) ± 0.1%\u003c\/li\u003e\n\u003cli\u003eTime to Go: ± 1 min\u003c\/li\u003e\n\u003cli\u003eTemperature: n. a.\u003c\/li\u003e\n\u003cli\u003eAccuracy of Current Measurement: ± 0.4%\u003c\/li\u003e\n\u003cli\u003eAccuracy of Voltage Measurement: ± 0.3%\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstallations \u0026amp; Dimensions: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation: Flush mount\u003c\/li\u003e\n\u003cli\u003eFront: 63mm diameter\u003c\/li\u003e\n\u003cli\u003eFront Bezel: 69 x 69 mm (2.7 x 2.7 inch)\u003c\/li\u003e\n\u003cli\u003eShunt Connection Bolts: M10 (0.3937 inches)\u003c\/li\u003e\n\u003cli\u003eBody Diameter and Depth: 52 mm (2.0 inch) and 31 mm (1.2 inch)\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP55 (not intended for outdoor use)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN 60335-1\u003c\/li\u003e\n\u003cli\u003eEmission \/ Immunity: EN 55014-1 \/ EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive: ECE R10-4 \/ EN 50498\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAccessories:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShunt (included): 500A \/ 50mV\u003c\/li\u003e\n\u003cli\u003eCables (included): 10 meters 6 core UTP with RJ12 connectors, and cable with 1Amp slow blow fuse for ‘+’ connection\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Optional (ASS000100000)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs, or support issues related to this product.\u003c\/strong\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/99782QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/99782BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MRljOaTdc3s\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44481201242247,"sku":"MXG-99782","price":506.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/99782XL.jpg?v=1776314018"},{"product_id":"victron-multi-rs-solar-48-6000-inverter-charger-pmr482602020","title":"Victron Multi RS Solar 48\/6000 Inverter\/Charger [PMR482602020]","description":"\u003ch2\u003eVictron Multi RS Solar 48\/6000 Inverter\/Charger [PMR482602020]\u003c\/h2\u003e\n\u003cp id=\"isPasted\"\u003eThe Multi RS Solar 48\/6000 is a 48V 6kVA inverter\/charger with two independent 3kWp PV 450V MPPT trackers for 6kWp total panel capacity. It supports direct grid connection without batteries—perfect for starting simple and adding storage later.\u003c\/p\u003e\n\u003cp\u003eUpdated in mid-2023 to a dual tracker design, its high-frequency technology delivers exceptional efficiency in a quiet, lightweight package with low standby power. Monitor all parameters via the integrated display or the VictronConnect app, which also provides historical trends, firmware updates, and configuration tools. Connect to a Cerbo GX for advanced ESS functions, like zero-export to block grid feed-in and backup mode to power critical loads during outages.\u003c\/p\u003e\n\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eOperating Modes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHybrid mode – Stores excess solar energy in a battery, to be used during the night or periods of high demand. Supplies additional power from the battery when demand exceeds grid capacity.\u003c\/li\u003e\n\u003cli\u003eBackup mode – Switches to backup mode during a grid outage.\u003c\/li\u003e\n\u003cli\u003eOff-grid mode – Operates without a grid connection.\u003c\/li\u003e\n\u003cli\u003eGenerator mode – Controls the generator to minimize run hours. Supplies additional power from the battery when demand exceeds the capacity of the generator.\u003c\/li\u003e\n\u003cli\u003ePV Inverter mode – Works as a PV inverter without a battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp id=\"isPasted\"\u003e\u003cstrong\u003ePowerControl \u0026amp; PowerAssist - Boosting the capacity of the grid or a generator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA maximum grid or generator current can be set. The Multi RS will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).\u003c\/p\u003e\n\u003cp\u003ePowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the Multi RS will compensate insufficient generator or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.\u003c\/p\u003e\n\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eDisplay, Bluetooth \u0026amp; VictronConnect app\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThe display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device , using the VictronConnect app.\u003c\/p\u003e\n\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eExtendable PV capacity, both AC -coupled \u0026amp; DC -coupled\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe integrated 6 kWp PV capacity can be extended by adding solar chargers to the system. Alternatively, the PV capacity can be extended by installing PV Inverters, of which the output power will be automatically controlled by the integrated frequency shift power control.\u003c\/p\u003e\n\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eCommunication Ports \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVE.Can connection to a GX device for system monitoring, energy meter (11), data logging, and remote firmware updates.\u003c\/p\u003e\n\u003cp\u003eVE.Direct connection to a GlobalLink 520 for remote data monitoring. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI\/O Connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProgrammable relay, temperature sensor and voltage sensor connections\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":44579302244487,"sku":"MXG-113793","price":1892.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/113793XL.jpg?v=1778279293"}],"url":"https:\/\/marinexgear.com\/collections\/electrical-battery-management.oembed","provider":"MarineXGear","version":"1.0","type":"link"}