{"title":"Boat Outfitting - Display Mounts","description":null,"products":[{"product_id":"scanstrut-scanpod-slim-deck-pod-up-to-8-display-white-spd-8-w","title":"Scanstrut Scanpod Slim Deck Pod - Up to 8\" Display - White [SPD-8-W]","description":"\u003ch2\u003eScanstrut Scanpod Slim Deck Pod - Up to 8\" Display - White [SPD-8-W]\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Slim Deck Pod - Up to 8\" Display\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits up to 8” displays\u003c\/li\u003e\n\u003cli\u003eUsable face 11.4W x 7.5H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel \u0026amp; Tilt Base\u003c\/strong\u003e\u003cbr\u003eOne handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest viewing angle\u003c\/strong\u003e\u003cbr\u003eAn adjustable ball joint allows range of movement and multiple mounting angles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdded Strength\u003c\/strong\u003e\u003cbr\u003eInner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverhead mounting\u003c\/strong\u003e\u003cbr\u003eDeck Pod models can be overhead mounted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle Free Install \u0026amp; Service \u003c\/strong\u003e\u003cbr\u003eFixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Protection \u003c\/strong\u003e\u003cbr\u003ePod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Uncut\u003c\/strong\u003e\u003cbr\u003eAs standard you will receive your Scanpod uncut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Deck\u003c\/li\u003e\n\u003cli\u003eUsable Face: 11.4\"W x 7.5\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 8\"H x 10\"W x 13\"L WT: 6.9 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114794283\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/45541QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44439600201863,"sku":"MXG-45541","price":505.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/45541XL.jpg?v=1775854060"},{"product_id":"scanstrut-scanpod-slim-deck-pod-f-10-to-12-display-white-spd-12-w","title":"Scanstrut Scanpod Slim Deck Pod - f\/10\" to 12\" Display - White [SPD-12-W]","description":"\u003ch2\u003eScanstrut Scanpod Slim Deck Pod - f\/10\" to 12\" Display - White [SPD-12-W]\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Slim Deck Pod - f\/10\" to 12\" Display - White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 10” to 12” displays\u003c\/li\u003e\n\u003cli\u003eUsable face 14W x 9.6H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel \u0026amp; Tilt Base\u003c\/strong\u003e\u003cbr\u003eOne handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest viewing angle\u003c\/strong\u003e\u003cbr\u003eAn adjustable ball joint allows range of movement and multiple mounting angles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdded Strength\u003c\/strong\u003e\u003cbr\u003eInner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverhead mounting\u003c\/strong\u003e\u003cbr\u003eDeck Pod models can be overhead mounted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle Free Install \u0026amp; Service \u003c\/strong\u003e\u003cbr\u003eFixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Protection \u003c\/strong\u003e\u003cbr\u003ePod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied Uncut\u003c\/strong\u003e\u003cbr\u003eAs standard you will receive your Scanpod uncut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Deck\u003c\/li\u003e\n\u003cli\u003eUsable Face: 14\"W x 9.6\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 9\"H x 11\"W x 16\"L WT: 8.5 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114794290\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/45542QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44439600234631,"sku":"MXG-45542","price":533.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/45542XL.jpg?v=1775854061"},{"product_id":"scanstrut-scanpod-deck-pod-uncut-f-10-to-12-displays-spd-13-w","title":"Scanstrut Scanpod Deck Pod Uncut f\/10\" to 12\" Displays [SPD-13-W]","description":"\u003ch2\u003eScanstrut Scanpod Deck Pod Uncut f\/10\" to 12\" Displays [SPD-13-W]\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Deck Pod Uncut for 10\" to 12\" Displays\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Displays and Standard Instruments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 10\" to 12\" Displays\u003c\/li\u003e\n\u003cli\u003eUsable face 14.7H x 9.7W\u003c\/li\u003e\n\u003cli\u003eAccomodates 3\/4 Standard instruments (e.g. ST60)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSWIVEL \u0026amp; TILT BASE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEST VIEWING ANGLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn adjustable ball joint allows range of movement and multiple mounting angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADDED STRENGTH\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOVERHEAD MOUNTING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDeck Pod models can be overhead mounted. Refer to part number guide for compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHASSLE FREE INSTALL \u0026amp; SERVICE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCREASED PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUPPLIED UNCUT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUsable Face: 14.7\"W x 9.7\"H\u003c\/li\u003e\n\u003cli\u003eMounting Style: Deck\u003c\/li\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 9\"H x 12\"W x 17\"L WT: 8.85 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114797284\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44440142545031,"sku":"MXG-76092","price":566.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/76092XL.jpg?v=1775866796"},{"product_id":"scanstrut-scanpod-helm-pod-system-pod-for-8-display-plus-4-nav-instruments-or-12-display-plus-2-nav-instruments-sph-system-w","title":"Scanstrut Scanpod Helm Pod System pod for 8\" display plus 4 nav instruments or 12\" display plus 2 nav instruments [SPH-SYSTEM-W]","description":"\u003ch2\u003eScanstrut Scanpod Helm Pod System pod for 8\" display plus 4 nav instruments or 12\" display plus 2 nav instruments [SPH-SYSTEM-W]\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Helm Pod System - White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith great new design features, the Scanstrut Helm Pod is a perfect choice for all cockpit configurations.\u003c\/p\u003e\n\u003cp\u003eWith options to fit radar displays, chartplotters and standard navigation instruments.\u003c\/p\u003e\n\u003cp\u003eUsable face : 21w x 11h \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRange of Models\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHelm Pod – System Pod for 8\" screen + 4 standard nav instruments; or 12\" screen + 2 standard nav instruments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Helm Fixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits pedestal rails from 25mm to 33.7mm (0.98\" - 1.33\"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7\") upwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSecure \u0026amp; Watertight Install\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSaddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Drill Fixing Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCustomised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHassle Free Install \u0026amp; Service\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncreased Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupplied Uncut\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Pedestal\u003c\/li\u003e\n\u003cli\u003eUsable Face: 21\"W x 11\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 9\"H x 14\"W x 24\"L WT: 11.2 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114792722\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/41490QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44477490987143,"sku":"MXG-41490","price":657.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/41490XL.jpg?v=1776289075"},{"product_id":"scanstrut-scanpod-deck-pod-uncut-f-7-or-8-display-2-or-4-instruments-spd-4xi-w","title":"Scanstrut Scanpod Deck Pod Uncut f\/7\" or 8\" Display  2 or 4 Instruments [SPD-4XI-W]","description":"\u003ch2\u003eScanstrut Scanpod Deck Pod Uncut f\/7\" or 8\" Display  2 or 4 Instruments [SPD-4XI-W]\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Deck Pod Uncut for 7\" or 8\" Display \u0026amp; 2 or 4 Instruments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScanstrut's SPD-4XI-W Deck Pod will fit a 7\" or 8\" screen plus 2 standard instruments or 4 standard instruments.\u003c\/p\u003e\n\u003cp\u003eCan invert the mount above the helm under a T-top or on a fly bridge.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Deck\u003c\/li\u003e\n\u003cli\u003eUsable Face: 20\"W x 6.2\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 8\"H x 9\"W x 23\"L WT: 7.8 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114794092\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44477529784455,"sku":"MXG-44300","price":590.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/44300XL.jpg?v=1776289535"},{"product_id":"scanstrut-scanpod-helm-pod-un-cut-for-2-or-4-instruments-sph-4xi-w","title":"Scanstrut Scanpod Helm Pod Un-Cut for 2 or 4 Instruments [SPH-4XI-W]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eScanstrut Scanpod Helm Pod Un-Cut for 2 or 4 Instruments [SPH-4XI-W]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Helm Pod Un-Cut for 2 or 4 Instruments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScanstrut's SPH-4XI-W Helm Pod is un-cut to fit  2 standard instruments or 4 standard instruments.\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Pedestal\u003c\/li\u003e\n\u003cli\u003eUsable Face: 20\"W x 6.2\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 8\"H x 9\"W x 23\"L WT: 5.9 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114794146\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44477530243207,"sku":"MXG-44609","price":556.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/44609XL.jpg?v=1776289538"},{"product_id":"scanstrut-scanpod-mast-mount-3-instrument-uncut-usable-face-4-6-x-14-5-white-spm-3i-w","title":"Scanstrut Scanpod Mast Mount 3 Instrument Uncut - Usable Face 4.6\" x 14.5\" - White [SPM-3I-W]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eScanstrut Scanpod Mast Mount 3 Instrument Uncut - Usable Face 4.6\" x 14.5\" - White [SPM-3I-W]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanpod Mast Mount - 3 Instruments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScanstrut Scanpod Mast Pods allow installation of instruments at the mast. Whether racing or cruising, Mast Pods give you the best view of your instruments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Mount-designed to fit multiple mast sizes\u003c\/li\u003e\n\u003cli\u003eMast arms pivot about semicircular washers, an additional cross-brace provides stiffness preventing sideways movement\u003c\/li\u003e\n\u003cli\u003eThe pod seal is manufactured from a high strength silicone, it has a very high resistance to heat and UV so you can be sure it will stand the test of time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUncut\u003c\/li\u003e\n\u003cli\u003eUseable Face: 14.5H\" x 4.65W\"\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 17.0\"W x 7.1H\"\u003c\/li\u003e\n\u003cli\u003eMast Arm: Length: 7.3\", Width on lower end 8.3\", Max opening 8.1\"\u003c\/li\u003e\n\u003cli\u003eFits mast sizes from 3\" to 8.8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Bracket\u003c\/li\u003e\n\u003cli\u003eUsable Face: 4.65\"W x 15.35\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 5\"H x 9\"W x 18\"L WT: 5.15 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 5060114793767\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44477559406727,"sku":"MXG-46525","price":536.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/46525XL.jpg?v=1776290005"},{"product_id":"navpod-rmx4811-railmount-pre-cut-f-garmin-8008-8208-rmx4811","title":"NavPod RMX4811 RailMount Pre-Cut f\/Garmin 8008\/8208 [RMX4811]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4811 RailMount Pre-Cut f\/Garmin 8008\/8208 [RMX4811]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4811 RailMount Pre-Cut for Garmin 8008\/8208\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSizing:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eOverall Size:\u003c\/b\u003e 12\"H x 8.375\"W x 7.125\"D\u003cbr\u003e\u003cb\u003eUsable Face:\u003c\/b\u003e8.375\"H x 10.5\"W x 5\"D\u003cbr\u003e\u003cb\u003eMax Cutout:\u003c\/b\u003e 7.125\"H x 10.25\"W\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods include\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eUPC: 659988108927\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478103683207,"sku":"MXG-54027","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/54027XL.jpg?v=1776292355"},{"product_id":"navpod-rmx4814-railmount-pre-cut-f-raymarine-a95-a97-a98-rmx4814","title":"NavPod RMX4814 RailMount Pre-Cut f\/Raymarine a95\/a97\/a98 [RMX4814]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4814 RailMount Pre-Cut f\/Raymarine a95\/a97\/a98 [RMX4814]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4814 RailMount Pre-Cut for Raymarine a95\/a97\/a98\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSizing:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eOverall Size:\u003c\/b\u003e 12\"H x 8.375\"W x 7.125\"D\u003cbr\u003e\u003cb\u003eUsable Face:\u003c\/b\u003e8.375\"H x 10.5\"W x 5\"D\u003cbr\u003e\u003cb\u003eMax Cutout:\u003c\/b\u003e 7.125\"H x 10.25\"W\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods include\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 9\"H x 12\"W x 14\"L WT: 7.9 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 659988108965\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478103715975,"sku":"MXG-54029","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/54029XL.jpg?v=1776292356"},{"product_id":"navpod-rmx4818-railmount-pre-cut-f-furuno-gp1870-gp1870f-rmx4818","title":"NavPod RMX4818 RailMount Pre-Cut f\/Furuno GP1870\/GP1870F [RMX4818]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4818 RailMount Pre-Cut f\/Furuno GP1870\/GP1870F [RMX4818]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4818 RailMount Pre-Cut for Furuno GP1870\/GP1870F\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSizing:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eOverall Size:\u003c\/b\u003e 12\"H x 8.375\"W x 7.125\"D\u003cbr\u003e\u003cb\u003eUsable Face:\u003c\/b\u003e8.375\"H x 10.5\"W x 5\"D\u003cbr\u003e\u003cb\u003eMax Cutout:\u003c\/b\u003e 7.125\"H x 10.25\"W\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods include\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eUPC: 659988108491\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478104305799,"sku":"MXG-54030","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/54030XL.jpg?v=1776292356"},{"product_id":"navpod-rmx4800-20-railmount-pre-cut-f-garmin-gpsmap-7408-7408xsv-7608-7608sxv-rmx4800-20","title":"NavPod RMX4800-20 RailMount Pre-Cut f\/Garmin GPSMAP 7408 \/ 7408xsv \/ 7608 \/ 7608sxv [RMX4800-20]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4800-20 RailMount Pre-Cut f\/Garmin GPSMAP 7408 \/ 7408xsv \/ 7608 \/ 7608sxv [RMX4800-20]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4800-20 RailMount Pre-Cut f\/Garmin GPSMAP® 7408 \/ 7408xsv \/ 7608 \/ 7608sxv\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods Include:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Hi-Gloss Material\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and 1provides for better structural rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Waterproof Seal\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Nickel Chrome Plated Screws\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Manufacturing Process\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eOur Commitment to Quality\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eUPC: 659988109962\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478893654151,"sku":"MXG-59229","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/59229.gif?v=1776294479"},{"product_id":"navpod-rmx4800-12-railmount-pre-cut-f-garmin-gpsmap-820-820xs-840-840xs-rmx4800-12","title":"NavPod RMX4800-12 RailMount Pre-Cut f\/Garmin GPSMAP 820 \/ 820xs \/ 840 \/ 840xs [RMX4800-12]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4800-12 RailMount Pre-Cut f\/Garmin GPSMAP 820 \/ 820xs \/ 840 \/ 840xs [RMX4800-12]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4800-12 RailMount Pre-Cut for GarminGPSMAP® 820 \/ 820xs \/ 840 \/ 840xs\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods Include:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Hi-Gloss Material\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and 1provides for better structural rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Waterproof Seal\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Nickel Chrome Plated Screws\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Manufacturing Process\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eOur Commitment to Quality\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eUPC: 659988109917\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478893686919,"sku":"MXG-59230","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/59230XL.jpg?v=1776294480"},{"product_id":"navpod-rmx4800-railmount-uncut-rmx4800","title":"NavPod RMX4800 RailMount Uncut [RMX4800]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4800 RailMount Uncut [RMX4800]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4800 RailMount Uncut\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUSEABLE FACE: 11.125\"W x 8\" H\u003cbr\u003eMAX CUTOUT: 7.125\" H x 10.25\" W\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods Include:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Hi-Gloss Material\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and 1provides for better structural rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Waterproof Seal\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Nickel Chrome Plated Screws\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Manufacturing Process\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eOur Commitment to Quality\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eUsable Face: 11.125\"W x 8\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 1\"H x 1\"W x 11\"L WT: 1 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 659988107203\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478893719687,"sku":"MXG-59232","price":506.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/59232XL.jpg?v=1776294480"},{"product_id":"navpod-rmx4808-railmount-pre-cut-f-simrad-nss8-b-g-zeus-t8-rmx4808","title":"NavPod RMX4808 RailMount Pre-Cut f\/Simrad NSS8\/B\u0026G Zeus T8 [RMX4808]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4808 RailMount Pre-Cut f\/Simrad NSS8\/B\u0026amp;G Zeus T8 [RMX4808]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4808 RailMount Pre-Cut for Simrad NSS8\/B\u0026amp;G Zeus T8\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMount NavPods Include:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Hi-Gloss Material\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNavPods are manufactured with a custom co-extruded acrylic capped\u003cbr\u003eABS material. We use the absolute best UV resistant material that provides a\u003cbr\u003every high gloss white finish that matches gel-coated fiberglass. The Gen3\u003cbr\u003eenhancements now include a thicker gauge material that improves strength and\u003cbr\u003e1provides for better structural rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Waterproof Seal\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll NavPods are manufactured with a double gasket system providing\u003cbr\u003ean excellent watertight seal between the front and back of the NavPod for\u003cbr\u003eprotection of your Marine Electronics. NavPods are made to withstand the\u003cbr\u003eharshest of wet offshore boating conditions. Gen3 enhancements include a\u003cbr\u003ethicker external silicone gasket with improved flush fit. The internal EPDM\u003cbr\u003egasket is now 50% thicker and is not subject to \"compression set\" like many\u003cbr\u003erubber compounds. This is important when you need to open the NavPod in the\u003cbr\u003efuture to service your electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Nickel Chrome Plated Screws\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe use all stainless steel mounting hardware that is supplied with\u003cbr\u003eeach NavPod. Large round head tamperproof screws have deeper sockets for the\u003cbr\u003eNavPod wrench for better holding ability when tightening than the previous\u003cbr\u003escrews. For Gen3 we provide nickel chrome-plated stainless steel tamperproof\u003cbr\u003escrews for security combined with a little bling!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Manufacturing Process\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-gauge thermoforming is considered an art since many processes\u003cbr\u003ecome into play. It all starts with the design and development of the\u003cbr\u003etooling. We are fortunate to have experienced in-house design engineers who\u003cbr\u003eutilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to\u003cbr\u003einterface with our CNC machining centers to produce quality tools with\u003cbr\u003eprecision tolerances. We have re-designed and re-tooled all of the popular\u003cbr\u003eNavPods. We have reviewed all of the former products and selected the best\u003cbr\u003edesign elements of each and incorporated them in every new Gen3\u003cbr\u003eproduct.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eOur Commitment to Quality\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe are committed to producing the best possible waterproof housing\u003cbr\u003efor Marine Electronics. Now with two decades of experience under our belt,\u003cbr\u003ewe are confident you will have years of trouble free service and a long\u003cbr\u003elasting high gloss finish. We will stand behind our commitment by now\u003cbr\u003eoffering a 10-year warranty on all new Gen3 NavPods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eUPC: 659988107241\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478894375047,"sku":"MXG-59236","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/59236XL.jpg?v=1776294481"},{"product_id":"navpod-rmx4900-01-railmount-pre-cut-f-raymarine-es97-es98-rmx4900-01","title":"NavPod RMX4900-01 RailMount Pre-Cut f\/Raymarine eS97\/eS98 [RMX4900-01]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4900-01 RailMount Pre-Cut f\/Raymarine eS97\/eS98 [RMX4900-01]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4900-01 RailMount Pre-Cut for Raymarine eS97\/eS98\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Hi-Gloss Material\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Waterproof Seal\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Nickel Chrome Plated Screws\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eThe Manufacturing Process\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eOur Commitment to Quality\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 8\"H x 11\"W x 17\"L WT: 9.4 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 659988110944\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44478917410951,"sku":"MXG-59325","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/59325XL.jpg?v=1776294680"},{"product_id":"navpod-rmx4900-uncut-usable-face-12-4w-x-7-4h-31-5cm-w-x-18-8cm-h-rmx4900","title":"NavPod RMX4900 Uncut (Usable Face = 12.4\"W x 7.4\"H) (31.5cm W x 18.8cm H) [RMX4900]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNavPod RMX4900 Uncut (Usable Face = 12.4\"W x 7.4\"H) (31.5cm W x 18.8cm H) [RMX4900]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRMX4900 Uncut (Usable Face = 12.4\"W x 7.4\"H) (31.5cm W x 18.8cm H)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Nickel Chrome Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003c\/p\u003e\n\u003cp\u003eRailMounts are designed for all popular standard size instruments as well as 7 and 9 inch charplotters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStructural Rigidity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These new NavPods are really strong!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterproof Seal\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNickel Chrome Plated Stainless Steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommitment to Quality\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Uncut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eUsable Face: 12.4\"W x 7.4\"H\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 7\"H x 8\"W x 12\"L WT: 8.8 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 659988110937\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44479028658311,"sku":"MXG-63987","price":506.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/63987XL.jpg?v=1776296329"},{"product_id":"navpod-rmx4900-09-railmount-f-raymarine-c95-c97-e95-e97-fits-1-or-1-25-tubing-rmx4900-09","title":"NavPod RMX4900-09 RailMount f\/Raymarine c95\/c97 \u0026 e95\/e97 (Fits 1\" or 1.25\" Tubing) [RMX4900-09]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4900-09 RailMount f\/Raymarine c95\/c97 \u0026amp; e95\/e97 (Fits 1\" or 1.25\" Tubing) [RMX4900-09]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRMX4900-09 RailMount for Raymarine c95\/c97 \u0026amp; e95\/e97 (Fits 1\" or 1.25\" Tubing)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Nickel Chrome Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003eRailMounts are designed for all popular standard size instruments as well as 7 and 9 inch charplotters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStructural Rigidity\u003c\/b\u003e\u003cbr\u003eThe Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These new NavPods are really strong!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWaterproof Seal\u003c\/b\u003e\u003cbr\u003eAll NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNickel Chrome Plated Stainless Steel\u003c\/b\u003e\u003cbr\u003eWe use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCommitment to Quality\u003c\/b\u003e\u003cbr\u003eWe are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.\u003cbr\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lqnZdk ---\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eUPC: 659988116830\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44479028691079,"sku":"MXG-63988","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/63988XL.jpg?v=1776296329"},{"product_id":"navpod-rmx4800-13-railmount-pre-cut-f-simrad-go9-b-g-vulcan-9-rmx4800-13","title":"NavPod RMX4800-13 RailMount Pre-Cut f\/Simrad GO9\/B\u0026G Vulcan 9 [RMX4800-13]","description":"\u003ch2\u003e\u003cb\u003eNavPod RMX4800-13 RailMount Pre-Cut f\/Simrad GO9\/B\u0026amp;G Vulcan 9 [RMX4800-13]\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRMX4800-13 RailMount Pre-Cut for Simrad GO9\/B\u0026amp;G Vulcan 9\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1\" or 1.25\" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAll RailMounts Include:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcrylic capped ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel tamper-proof fasteners\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble Seal for watertight integrity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eModels are available pre-cut for popular electronics.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChromed stainless steel arm with swivel mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo sets of adaptors included for 1\" or 1.25\" diameter tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Hi-Gloss Material\u003c\/b\u003e\u003cbr\u003eNavPods are manufactured with a custom co-extruded acrylic capped\u003cbr\u003eABS material. We use the absolute best UV resistant material that provides a\u003cbr\u003every high gloss white finish that matches gel-coated fiberglass. The Gen3\u003cbr\u003eenhancements now include a thicker gauge material that improves strength and\u003cbr\u003e1provides for better structural rigidity.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Waterproof Seal\u003c\/b\u003e\u003cbr\u003eAll NavPods are manufactured with a double gasket system providing\u003cbr\u003ean excellent watertight seal between the front and back of the NavPod for\u003cbr\u003eprotection of your Marine Electronics. NavPods are made to withstand the\u003cbr\u003eharshest of wet offshore boating conditions. Gen3 enhancements include a\u003cbr\u003ethicker external silicone gasket with improved flush fit. The internal EPDM\u003cbr\u003egasket is now 50% thicker and is not subject to \"compression set\" like many\u003cbr\u003erubber compounds. This is important when you need to open the NavPod in the\u003cbr\u003efuture to service your electronics.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Nickel Chrome Plated Screws\u003c\/b\u003e\u003cbr\u003eWe use all stainless steel mounting hardware that is supplied with\u003cbr\u003eeach NavPod. Large round head tamperproof screws have deeper sockets for the\u003cbr\u003eNavPod wrench for better holding ability when tightening than the previous\u003cbr\u003escrews. For Gen3 we provide nickel chrome-plated stainless steel tamperproof\u003cbr\u003escrews for security combined with a little bling!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Manufacturing Process\u003c\/b\u003e\u003cbr\u003eHeavy-gauge thermoforming is considered an art since many processes\u003cbr\u003ecome into play. It all starts with the design and development of the\u003cbr\u003etooling. We are fortunate to have experienced in-house design engineers who\u003cbr\u003eutilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to\u003cbr\u003einterface with our CNC machining centers to produce quality tools with\u003cbr\u003eprecision tolerances. We have re-designed and re-tooled all of the popular\u003cbr\u003eNavPods. We have reviewed all of the former products and selected the best\u003cbr\u003edesign elements of each and incorporated them in every new Gen3\u003cbr\u003eproduct.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOur Commitment to Quality\u003c\/b\u003e\u003cbr\u003eWe are committed to producing the best possible waterproof housing\u003cbr\u003efor Marine Electronics. Now with two decades of experience under our belt,\u003cbr\u003ewe are confident you will have years of trouble free service and a long\u003cbr\u003elasting high gloss finish. We will stand behind our commitment by now\u003cbr\u003eoffering a 10-year warranty on all new Gen3 NavPods.\u003cbr\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44479046123655,"sku":"MXG-64562","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/64562XL.jpg?v=1776296626"},{"product_id":"navpod-rmx4800-07-railmount-pre-cut-f-raymarine-axiom-9-rmx4800-07","title":"NavPod RMX4800-07 RailMount Pre-Cut f\/Raymarine AXIOM 9 [RMX4800-07]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNavPod RMX4800-07 RailMount Pre-Cut f\/Raymarine AXIOM 9 [RMX4800-07]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRMX4800-07 RailMount Pre-Cut for Raymarine AXIOM 9 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-Cut for Surface Mount Using Rear Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eRequires Raymarine Right Angle Connector \u003c\/li\u003e\n\u003cli\u003eFits 1″ or 1.25″ Tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Style: Rail\u003c\/li\u003e\n\u003cli\u003eCut\/Uncut: Cut\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 9\"H x 13\"W x 15\"L WT: 7.8 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 659988116489\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44479263768711,"sku":"MXG-71974","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/71974XL.jpg?v=1776299416"},{"product_id":"navpod-railmount-pre-cut-f-garmin-gpsmap-8410xsv-8610xsv-fits-1-or-1-25-tubing-rmx4800-10","title":"NavPod RailMount Pre-Cut f\/Garmin GPSMAP 8410xsv  8610xsv (Fits 1 or 1.25 Tubing) [RMX4800-10]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNavPod RailMount Pre-Cut f\/Garmin GPSMAP 8410xsv  8610xsv (Fits 1 or 1.25 Tubing) [RMX4800-10]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRailMount Pre-Cut for Garmin GPSMAP 8410xsv \u0026amp; 8610xsv (Fits 1″ or 1.25″ Tubing)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*For Mounting on Starboard side of Pedestal Guard only \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1” or 1.25” diameter tube. A Stainless Steel arm is used to mount the NavPod housing. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.\u003c\/p\u003e\n\u003cp\u003eRailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44479649808519,"sku":"MXG-85645","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/85645XL.jpg?v=1776305550"},{"product_id":"navpod-rmx4800-14-railmount-pre-cut-f-garmin-gpsmap-923-923xsv-943-943xsv-rmx4800-14","title":"NavPod RMX4800-14 RailMount Pre-Cut f\/Garmin GPSMAP 923, 923xsv, 943  943xsv [RMX4800-14]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNavPod RMX4800-14 RailMount Pre-Cut f\/Garmin GPSMAP 923, 923xsv, 943  943xsv [RMX4800-14]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRMX4800-14 RailMount Pre-Cut for Garmin GPSMAP® 923, 923xsv, 943 \u0026amp; 943xsv\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1″, 1.125″, or 1.25″ diameter tube. A Stainless Steel arm is used to mount the NavPod housing. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm (available space is 0.75″ inside the narrowest part of the arm, so keep this in mind for planning your cable run; most transducer cables will not fit through the arm), and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without the replacement of the pedestal guard.\u003c\/p\u003e\n\u003cp\u003eRailMounts are designed for all popular standard-size instruments, as well as 7 and 9-inch chartplotters.\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":44480971276423,"sku":"MXG-96188","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/96188XL.jpg?v=1776311940"},{"product_id":"scanstrut-scanpod-deckpod-f-displays-up-to-15-spd-15-w","title":"Scanstrut ScanPod DeckPod f\/Displays Up To 15\" [SPD-15-W]","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eScanstrut ScanPod DeckPod f\/Displays Up To 15\" [SPD-15-W]\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eScanPod DeckPod for Displays Up To 15\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ScanPod range offers maximum choice and versatility for installing all leading brands of instruments and screens.\u003c\/p\u003e\n\u003cp\u003eDesigned for all leading brands and models of displays. Our Deck Pod allows you to install your MFD virtually on any flat surface on board. This allows you to have your display in the prime position while out sailing on your powerboat or RIB. With the pull of a lever, the intuitive design gives you a 360-degree viewing angle to make the most of what your display has to offer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwivel \u0026amp; Tilt Base - One-handed quick-release action. simply release the lever, swivel, and tilt to suit your requirements before locking back into position.\u003c\/li\u003e\n\u003cli\u003eBest Viewing Angle - An adjustable ball joint allows a range of movement and multiple mounting angles.\u003c\/li\u003e\n\u003cli\u003eAdded Strength - Inner bracing plate secures the deck pod base to the pod and gives increased rigidity to the assembly eliminating potential damage from shock and vibration.\u003c\/li\u003e\n\u003cli\u003eOverhead Mounting - Deck Pod models can be overhead mounted. refer to our fit my device tab on our website.\u003c\/li\u003e\n\u003cli\u003eHassle-Free Install \u0026amp; Service - Fixings fit from back to front cutting their threads into injection molded abs inserts designed into the Pod front. this design allows for a quick and safe install and repeats servicing.\u003c\/li\u003e\n\u003cli\u003eIncreased Protection - Deck Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.\u003c\/li\u003e\n\u003cli\u003eSupplied Uncut - As standard, you will receive your Scanpod. for a small charge factory cutting service is available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--- cis2:m2lqnZdk ---\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/98049QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":44480995590279,"sku":"MXG-98049","price":698.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/7275\/5335\/files\/98049XL.jpg?v=1776313043"}],"url":"https:\/\/marinexgear.com\/collections\/boat-outfitting-display-mounts.oembed?page=2","provider":"MarineXGear","version":"1.0","type":"link"}